101 Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start.
102 Administrator
103 Any Application
104 QC Trusted User
105 Reader
106 Server Application
107 BUILTIN
108 Activator
111 Upgrading COM+ (%1 of %2 applications)
114 Members of this role are allowed to activate components in this partition.
188 STATUS [%3]: Exporting application '%1' to '%2' \n
190 ERROR [%4]: An error occurred copying files to '%3'\n while exporting application '%2' . The error code was %1.\n Make sure all the component files in this application are accessible.\n
191 ERROR [%3]: An unexpected error occurred exporting application '%2'. The error code was %1.\n
193 ERROR [%2]: An error occurred creating a share to '%3'. Make sure the folder is not open in another application, including the Windows Explorer.\n The error code was %1. Check the Event Viewer on that computer for further messages.\n
194 ERROR [%2] : An error occurred accessing the COM+ System application on this computer.\n COM+ may not be installed correctly. The error code was %1.\n There may be further messages in the Event Viewer on this computer or on your local computer.\n
196 STATUS [%1]: Preparing to replicate from source computer.\n
197 COM REPLICATION LOG %1\n\n
200 ERROR [%2]: An error occurred copying exported application files from the source to the target.\n The error code was %1. Make sure the target folder mentioned in the previous status message is not open in another process,\n including the Windows Explorer.\n
201 STATUS [%1]: Preparing to replicate to target computer.\n
202 STATUS [%2]: Installing application from '%1'.\n
203 ERROR [%3] : An unexpected error occurred installing application from '%2'. The error code was %1.\n
204 STATUS [%1]: Removing the computer list.\n
205 STATUS [%2]: Copying computer list from '%1'.\n
206 STATUS [%2]: Copying local computer properties from '%1'.\n
207 STATUS [%2]: Deleting application '%1' on target computer.\n
209 STATUS [%2]: Copying all exported application files from the source computer to '%1' on the target.\n
211 STATUS [%1]: Removing old replica files in '%2'.\n
212 ERROR [%2]: An error occurred removing and renaming replica folders. The error code was %1.\n Make sure that none of the folders mentioned in the 3 previous status messages is open in another application,\n including the Windows Explorer. Check the Event Viewer on that computer for further messages.\n
213 ERROR [%3]: An error occurred removing the temporary network share '%2'. The error code was %1. Check the Event Viewer on that computer for further messages.\n
216 ERROR [%3]: An error occurred will examining '%2' for applications to install.\n The error code was %1. Make sure this folder is not open in another application, including the Windows explorer."\n
217 Make sure the folder is not open in another application, including the Windows Explorer.\n
218 ERROR : The COM version on '%1' is not compatible with the version on your local computer.\n
219 STATUS [%1]: Renaming '%2' to '%3'.\n
220 ERROR [%3]: An error occurred creating or emptying the folder '%1'.\n Make sure the folder is not open in another application, including the Windows Explorer.\n The error code was %2. Check the Event Viewer on that computer for further messages.\n
221 ERROR [%1]: An unexpected error occurred replicating the identity for the\n application '%2' with ID '%3'.\n The identity of the application may not be a valid account on the\n target computer. The application has been disabled. (The error code\n was %4.)\n
222 ERROR [%2] : An unexpected error occurred accessing computer properties. The error code was %1.\n Additional debugging information: '%3'.\n
223 ERROR [%2] : An unexpected error occurred accessing the computer list. The error code was %1.\n Additional debugging information: '%3'.\n
224 ERROR [%2] : An unexpected error occurred deleting applications. The error code was %1.\n Additional debugging information: '%3'.\n
225 ERROR [%2] : An unexpected error occurred clearing the computer list. The error code was %1.\n Additional debugging information: '%3'.\n
226 ERROR [%2] : An unexpected error occurred accessing the catalog. The error code was %1.\n Additional debugging information: '%3'.\n
228 ERROR [%2] : An unexpected error occurred deleting partitions. The error code was %1.\n Additional debugging information: '%3'.\n
230 STATUS [%2]: Deleting partition '%1' on target computer.\n
232 ERROR [%2] : An unexpected error occurred adding partitions. The error code was %1.\n Additional debugging information: '%3'.\n
234 STATUS [%1] : Adding partition '%2' on target computer.\n
236 ERROR [%1]: Unable to find the application '%2' with id '%3' on the target\n computer.\n
237 ERROR [%1]: The application '%2' is an NT Service.\n Its identity information has not been replicated. The service has\n been configured to run as LocalSystem, and has been disabled.\n
238 STATUS [%1]: Setting identity for app '%2'.\n
239 \nWARNING: COM+ Partitions are not supported on one or more target machines.\nCOMREPL will only be able to replicate applications in the global partition\nbetween the source machine and these target machines.\n\nPlease enter YES (upper case) to continue:
240 STATUS [%1] : Replicating Partition Users.\n
241 ERROR [%1] : An error occurred replicating the partition users\n collection. The error code was %2. Make sure that\n all of the users in the partition users collection exist or are valid\n on the target computer.
242 ERROR [%1] : An unexpected error occurred deleting partition users. The error code was %2.\n
251 Errors occurred - refer to the log file for details.\n
252 Replication succeeded.\n
253 \nCOMREPL replicates one computer's COM+ Applications to a one or more target computers.\n\n\nCOMREPL <source> <targetList> [/n [/v]] \n\n <source> Specifies the name of the source computer\n <targetList> Specifies the names of the target computers separated with blanks\n /n Don't issue confirmation prompts\n /v Echo log output to the console\n\n
254 \nWARNING: The entire catalog on %1 will be\nreplaced with the catalog from %2\nReplication is an irreversable action.\n\nPlease enter YES (upper case) to continue:
255 Replication terminated.\n
256 ERROR: Could not create the replication server object. Error code was %1.
257 \nReplication started - logging to %1\n
258 ERROR: The source computer cannot be in the target computer list.\n
259 ERROR: Duplicate computer names in the target list.\n
382 Currently there is no help for this error message. Please see %systemroot%\comsetup.log for more details.
407 Sub-component %1 raised an exception while processing the OC_INIT_COMPONENT setup message.
408 Sub-component %1 raised an exception while processing the OC_QUEUE_FILE_OPS setup message.
409 Sub-component %1 raised an exception while processing the OC_ABOUT_TO_COMMIT_QUEUE setup message.
412 Sub-component %1 raised an exception while processing the OC_COMPLETE_INSTALLATION setup message.
413 Sub-component %1 raised an exception while processing the OC_QUERY_STATE setup message.
414 Sub-component %1 raised an exception while processing the OC_QUERY_IMAGE_EX setup message.
415 Sub-component %1 raised an exception while processing the OC_QUERY_CHANGE_SEL_STATE setup message.
416 Sub-component %1 raised an exception while processing the OC_CALC_DISK_SPACE setup message.
417 Sub-component %1 raised an exception while processing the OC_NEED_MEDIA setup message.
418 Sub-component %1 raised an exception while processing the OC_QUERY_STEP_COUNT setup message.
419 Sub-component %1 raised an exception while processing the OC_CLEANUP setup message.
420 Component '%1' setup failed to queue an operation for completion on the next computer restart. This is most likely due to a problem with the registry. Please ensure you have registry write permission and the registry is not corrupt.
421 Setup failed while attempting to copy file '%1' to '%2'. Please ensure that '%1' exists and that '%2' is not in use by some other process.
422 Setup failed while attempting to move file '%1' to '%2'. Please ensure that '%1' exists and that '%2' is not in use by some other process.
423 Setup failed to set the file attributes '%1' on the file '%2'.
424 Failed to move file from '%1' to '%2' with %3.
425 Failed to find file '%1'.
426 Failed to get the registry value '%2', '%1'.
427 Failed to set the registry value '%2', '%1'.
428 Failed to load the library '%1'.
429 Failed to register the type library '%1'.
430 Failed to get function address from '%1' for '%2()'.
431 Failed to execute function '%1()' in '%2'.
432 Setup was unable to open the service control manager.
433 Setup could not obtain a handle to the '%1' service.
434 Failed to query service status for '%1'.
435 Failed to start service '%1'.
436 Setup timed out waiting for service '%1' to start.
437 The service control manager was unable to stop the '%1' service.
438 Setup timed out waiting for service '%1' to stop.
445 Setup failed because the user who launched the process does not have administrative privileges. Please log in as an administrator and try again.
446 Setup failed to calculate the disk space requirements for the files specified section '%1' of the COM+ inf file.
447 Setup failed to create all of the registry and INI entries specified in section '%1' of the COM+ inf file.
448 Setup failed to install at least one of the services specified in section '%1' of the COM+ inf file.
449 Setup failed to queue the file operations from section '%1' of the COM+ inf file.
450 Setup was associate the directory ID '%1' with the directory '%2'.
454 Setup was unable to save the link '%1' to the target file '%2'.
455 Setup failed while trying to run '%1'. Make sure that the executable exists.
458 Setup was unable to create an instance of the '%1' interface from the coclass '%2'
459 A call to QueryInterface for the interface '%1' failed with a '%2' interface pointer
461 Setup was unable to get the '%1' collection.
462 Setup was unable to get the key of the '%1' object.
463 Set was unable to get an object count from the '%1' collection.
464 Setup was unable to get item %1 from the '%2' collection.
465 Setup was unable to get the name of the '%1' object.
466 Setup was unable to populate the '%1' collection.
467 Setup was unable to remove the item '%1' from the '%2' collection.
468 Setup was unable to add an object to the '%1' collection.
469 Setup was unable to save changes to the '%1' collection.
471 Setup could not install a COM+ component from '%1' into the application '%2'.
472 Setup was unable to set the value '%1 = %2' for the '%3' object.
474 Setup could not import the COM+ component '%1' by name into the application '%2'.
477 Sub-component %1 raised an exception while processing the OC_SET_LANGUAGE setup message.
478 Sub-component %1 raised an exception while processing the OC_QUERY_SKIP_PAGE setup message.
479 Sub-component %1 raised an exception while processing the OC_SET_LANGUAGE setup message.
480 Sub-component %1 raised an exception while processing the OC_REQUEST_PAGES setup message.
481 Sub-component %1 raised an exception while processing the OC_QUERY_SKIP_PAGE setup message.
482 Sub-component %1 raised an exception while processing the OC_FILE_BUSY setup message.
483 Warning: Setup was not able to completely migrate the legacy MTS catalog. More information about the specific problems can be found in the setup error log.
484 Installing COM+
485 Configuring COM+
488 A call to CoInitialize failed: COM could not be initialized on this computer.
489 COM+ could not add the user '%1' to the role '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
490 COM+ could not set a property of the component '%1' in the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
491 COM+ could not import the component '%1' into the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
492 COM+ could not install the component from '%1' into the application '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
493 COM+ could not set a property of the object '%1' in the collection '%2'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
494 COM+ could not create the object '%1' with GUID '%2' in the collection '%3'. The COM+ admin or the Distributed Transaction Coordinator may not be working properly.
497 Setup could not create the COM+ catalog. COM+ will not operate correctly without the catalog. If Windows does not work properly, you can attempt to reinstall, if the problem still persist, then you could contact Microsoft technical support.
498 The COM+ event classes could not be registered.
499 Setup could not upgrade the COM+ catalog schema from the previous version.
503 The Java trustlib directory could not be found. Java has not been installed properly on this computer.
505 Upgrading COM+ (%1 applications)
506 Upgrading COM+ (%1 of %2 applications)
507 %1 setup caught an unhandled exception during installation. %2 will not work when setup completes. \n\nUnhandled exception %3 occurred at address %4. More information, including a stack trace, can be found in the %5\comsetup.log file.
508 COM+
509 Please contact Microsoft Technical Support for assistance with this problem.
510 Members of this role are allowed to modify the configuration of COM+ applications and components on this system.
511 Members of this role are allowed to examine the configuration of COM+ applications and view information related to active objects and their performance.
512 Members of this role are trusted to faithfully transmit messages for queued components on behalf of other users.
513 This role should include the identities under which COM+ server applications run on your system.
514 This role should include the identities under which any COM+ application (library or server) may run on your system.
515 COM+ Transaction Context Component
516 COM+ Extended Transaction Context Component
517 Queued Components Recorder
518 Queued Components Player
519 COM+ QC Dead Letter Queue Listener Starter
520 COM+ Event Notification Server
521 COM+ Instance Tracking Component
522 COM+ Active Process Iteration Server
523 Debug Dump Server
524 COM+ Utilities Application
525 COM+ QC Dead Letter Queue Listener
526 Creating COM+ objects
527 Creating COM+ partitions
528 Creating COM+ applications
529 Creating COM+ System Application service
530 Creating COM+ components
531 Setting COM+ component descriptions
532 Creating COM+ custom activators
533 Deleting legacy COM+ roles
534 Creating COM+ roles
535 Creating COM+ interfaces
536 Creating COM+ methods
537 Installing COM+ roles to applications
538 Updating COM+ roles
539 Setting COM+ System Application as system
540 Com+ Explorer Tracking Event Subscription Application
541 Base Application Partition\Administrator
545 Upgrading COM+ Event Classes
546 Base Application Partition
602 Component Services
604 Unable to start the COMUID.DLL server! This file may have become unregistered or damaged. Please verify installation and try again.
638 Unable to retrieve all partition set properties
639 Unable to retrieve all partitions in this partition set
640 Unable to retrieve all users in this partition set
641 Unable to retrieve all available partitions
643 Organizational Units
644 Please select an Organizational Unit you would like to add to this Partition Set.
645 Pick Set Organizational Units
646 Partition Name
647 Default
648 Partition ID
649 The first partition added to this set has been designated as the default partition. Please ensure this is the desired default partition before saving set changes.
650 COM+ Partition Configuration Warning
651 Unable to add Organizational Unit to set
652 Unable to retrieve all Organizational Units in this partition set
653 <none>
654 The name value you have entered is too long. Please enter a string less than 64 characters long.
655 The description value you have entered is too long. Please enter a string less than 512 characters long.
656 The GUID entered is not in the proper form. Please enter a non-NULL GUID in the following form: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}
657 Base Application Partition
658 The GUID entered has already been used by another object in this container.
659 Component Services
901 Role-based Security Policy
902 Default Role Membership Policy
903 QC Trusted User
922
\n
\nDestination of the rejected call:
\n Application Id: %s
\n CLSID: %s
\n IID: %s
\n Method #: %ld
\n
\n Class: %s
\n Interface: %s
\n Method: %s
\n
\nCaller Information:
\n
923 Svc/Lvl/Imp = %d/%d/%d, Identity = %s %s
\n
924 (unknown)
925 (Direct)
926 (Original)
927
\nServer Application ID: %s
928
\nServer Application Name: %s
929
\nThe serious nature of this error has caused the process to terminate.
930
\nError Code = 0x%08x : %s
931
\nCOM+ Services Internals Information:
\nFile: %s, Line: %d
932 Error in %s(%d): %s
933 Error in %s(%d), hr = %x: %s
934 Error in %s(%d), %s: %s
936
\nException: %s
937
\nAddress: %s
938
\nCall Stack:
940
\nComponent Prog ID: %s
941
\nMethod Name: %s
942
\nProcess Name: %s
943
\nComsvcs.dll file version: %s %s %s
944
\nServer Application Instance ID:
\n%s
945 COM+
946 This component is registered in one or more Application Partition(s) outside of Base Application Partition. COM+/VB6 Debugging Integration does not support this scenario.\n\nPlease debug your component while it is registered ONLY in the Base Application Partition.
947 COM+ System Application
948 Manages the configuration and tracking of Component Object Model (COM)+-based components. If the service is stopped, most COM+-based components will not function properly. If this service is disabled, any services that explicitly depend on it will fail to start.
1858 You do not have permission to perform the requested action. If security is enabled on the System Application of the target computer make sure you are included in the appropriate roles.
1859 Initialization Error
1860 Unable to start application because %1 is not installed properly. Please re-install this product.
1863 Cannot open this folder because connection to the MSDTC service on '%1' failed. Make sure that:
\n
\nThe computer is running.
\nYou have permissions to administer the computer.
\nThe computer name is correct.
1864 Connecting to the MSDTC service on '%1'. This icon will be enabled when the connection has been established.
1865 Open Folder
1866 DLL
1867 Started
1868 Stopped
1869 Starting
1870 Stopping
1871 Connecting
1872 Connection failed
1873 DTC
1874 %s object(s)
1875 Install
1876 One or more files do not contain components or type libraries. These files cannot be installed.
1882 New Application
1883 You cannot use the name '%1' because it is already in use. Please choose another name.
1884 Reason
1885 Name
1886 The object was not found in the catalog
1887 One or more of the object's properties are missing or invalid
1888 The object is already registered
1889 Some components could not be installed due to the following errors:
1890 Some changes could not be applied due to the following errors:
1891 Some objects could not be deleted due to the following errors:
1892 Some object properties could not be read due to the following errors:
1893 The component is already configured on the requested computer.\n\nThe component is either installed in a application or configured as a remote component. Before re-installing, you must delete the existing component.
1894 An error occurred while processing the last operation on the remote computer '%1'.\nError code %2\nThe event log may contain additional troubleshooting information.
1895 An error occurred while processing the last operation.\nError code %1\nThe event log may contain additional troubleshooting information.
1896 Some of the objects properties were missing or damaged.\n\nThis can occur if the registry entries associated with the item are changed by some other program.\n\nDamaged items must be deleted and re-created.
1897 The item or one of its parent items in the hierarchy has already been deleted.
1898 Explanation
1899 You entered an invalid file name or path or selected too many files at once. There is a limit of 256 characters for the combined length of all file names selected.
1900 An unknown error occurred while adding files. Please try to add the files again.
1901 Add Computer
1902 The %1 string you entered is too long. The maximum length is %2 characters.
1903 name
1904 The %1 property cannot contain any of the following characters \ / ~ ! @ # % ^ & * ( ) | } { ] [ ' " > < ? : ; .
1905 You cannot add computer '%1' because it already exists in your Computers folder.
1913 The application file cannot be read. Either the file does not exist, the file contains invalid data or a read error occurred accessing the file.
1914 The application is already installed.
1915 A application with the same application ID is already installed. Make sure you have not already installed this application file.
1916 The file path is invalid
1917 The installation path does not exist and cannot be created. Check the path syntax.
1918 An error occurred copying the file
1919 An error occurred copying files to the destination directory. Some files may be missing from the source directory or you may not have access to the install directory.
1920 Errors occurred while installing the following applications:
1921 One or more components could not be installed.
1922 The application could not be installed because installation of the following components failed:
1923 Error occurred writing to the application file. Either the path cannot be accessed or an existing file cannot be overwritten. Make sure you entered the full path for the application definition file. The application was not exported.
1924 Unable to copy component files to the application definition file directory. An error occurred writing to the directory or existing files could not be overwritten. The application was not exported.
1925 One or more objects in the application are damaged. The application was not exported. Open all components, interfaces, roles and role membership lists in the application to verify the integrity of the application objects.
1926 Install from application file
1927 COM DLL
1928 One or more files are COM DLLs but do not contain any components. These files could be proxy/stub DLLs or component DLLs with no corresponding type information. These files will be self-registered if you proceed. If these files are not proxy/stub DLLs you should remove them from the list. Do you want to proceed and install these files?
1929 Edit Property
1930 The shutdown delay must be a number between 0 and 1440.
1931 The DLL could not be loaded. Check to make sure all required application runtime files and other dependent DLLs are available in the component DLL's directory or the system path.
1932 One or more files were not found on computer '%1'. When installing components on a remote computer you must enter file names that the remote computer can access. You can enter a UNC name or a drive:path file name that exits on the remote computer.
1933 A component in the same DLL is already installed
1934 This component could not be installed because another component in the same DLL is already registered as remote. Delete those remote components and try installing the component again.
1935 One or more user accounts or groups could not be added to roles because they do not exist. The application was installed.
1936 One or more users in the application file are not valid
1937 You must enter a user account.
1938 Password and confirm password do not match.
1939 Unable to set required authentication level for update request. The request cannot be completed.
1940 Set Application Identity
1941 The timeout value must be between 1 and 3600.
1942 The user account or password entered is invalid. If you entered a domain account, make sure the name is prefixed with the domain name.
1943 The component's CLSID is missing or corrupt
1944 The component's CLSID is not registered. The component may have been unregistered, or the component registration information may be invalid. Make sure the component's self-registration code is correct and re-install the component
1945 The component's progID is missing or corrupt
1946 The component's progID information is invalid. The component's progID information does not match the component's CLSID information. The progID or CLSID information may have been incorrectly updated. Make sure that the component's self-registration code is correct and re-install the component.
1947 Transaction statistics for '%1' are already displayed in another window. You can only open one transactions statistics window for a given server.
1948 The transaction list for '%1' is already displayed in another window. You can only open one transaction list window for a given server.
1949 You entered your local computer name. Your local computer is already in the Computers folder under the name "My Computer"
1950 Application file CLSIDs or IIDs do not match corresponding DLLs
1951 The component information in the application file is out of date. A component CLSID or IID has been re-generated since the application was exported. You must re-export the application.
1952 Account
1953 Timeout
1954 Shutdown
1955 Run always
1956 Interface information is either missing or changed
1957 If the component was imported, no interface information is available. If the component was installed, the interface information has been regenerated since the component was installed. Delete the component from the application and re-install it.
1958 The typelib could not be loaded
1959 Shortcut Menu
1960 There are no commands that apply to the selected items.
1961 Are you sure you want to delete '%1'?
1962 Are you sure you want to delete these %1 items?
1963 Confirm Item Delete
1964 Confirm Multiple Item Delete
1965 No server file share available
1966 No visible file share point is available on the server to copy component files. The user account set for the System application on the client computer must have read access to a share point on the server. A visible share point must be available to access the proxy/stub DLL and type library for each component. You can use the Explorer to check which proxy/stub DLLs and type libraries are registered for the interfaces implemented by the components.
1967 You entered a local file name for use on the remote computer '%1'. The drive and path will be interpreted as a file name on the remote computer. Are you sure you want to install this file?
1968 The file does not exist
1969 DLL could not be loaded
1970 The component DLL could not be loaded. Make sure that all required application runtime files or other dependent DLLs are available in the DLL's directory or the system path.
1971 DllRegisterServer failed on component install
1972 The component DLL's self-registration routine failed. The DllRegisterServer function failed or the routine did not register the component.
1973 GetClassObject failed in the DLL. Either a DLL threw an exception during install processing or the DLL and its embedded type library are out of sync. Ensure that the correct versions of all application runtime files or other dependent DLLs are available in the component DLL's directory or the system path.
1974 Export Application
1975 The application file name you entered will be interpreted as a local file name on the remote computer '%1'. The remote computer must have access to the file. Are you sure you want to export to this file?
1976 Install Application
1977 You entered one or more local file names for use by the remote computer '%1'. These file name will be interpreted as local files on the remote computer. Add these files?
1978 The install directory is a local path name that will be used by the remote computer '%1'. The path will be interpreted as a local path on the remote computer. Continue with application install?
1979 The registered typelib ID is not valid
1980 Registered type library information is invalid. The library GUID, version, locale, or platform information may be corrupt. Re-install the corresponding component(s).
1981 The "Application Directory" setting in your system registry is missing or corrupted.
1982 One or more CLSIDs were specified in a type library but were not recognized by any class factories in the DLLs. The component DLLs cannot be installed.
1983 Errors occurred while in the component registrar
1984 Registration of this component failed. This component resides in a file which lacks self-registration code but for which an external entity for registering components from such files has been provided. This external entity failed to register the component. Check the event log for details.
1985 The component registrar referenced in this file is not available
1986 Registerable
1987 Running
1988 Activation
1989 Same name cannot be set for multiple items.
1990 This application file version is not supported.
1991 This application file version is not supported. The catalog into which you are attempting to install this application file does not support this application file's version.
1992 The '%1' application was created by '%2'. Are you certain the changes you are about to make are supported by '%2' ?
1993 The applications were created by one or more external products. Are you certain the changes you are about to make are supported by these products?
1994 The server catalog version is not supported. The catalog is either newer or older than this application and a common version for communication does not exist.
1995 Changes to this object and its sub-objects have been disabled
1996 The selected item cannot be changed. The item is currently locked against changes.
1997 The delete function has been disabled for this object
1998 The selected item cannot be deleted. This item is currently locked against deleting.
2000 Service Control Error
2001 Unable to start the MSDTC service on the target computer. Error code was "%1".
2002 Unable to stop the MSDTC service on the target computer. Error code was "%1".
2003 Unable to stop the MSDTC service. There are other running services dependent on MSDTC.
2004 Library
2005 Server
2006 Disabled
2007 One or more users do not exist or lack security privileges for this operation
2008 The "Default" authentication level is no longer supported. The authentication level will be changed to "Packet".
2009 Property Initialization
2010 DTC Error
2011 DTC was installed by the SQL server. Please reinstall!
2012 One or more components are not registered.
2013 This application file refers to components that were originally imported into the application. These components must be manually registered before installing the application. One or more of these components is not registered on the target system.
2014 The System application on this computer is currently not available. Please retry the request.
2015 Unable to connect to the remote computer named '%1'. Either the machine does not exist or you don't have permission to access this machine.
2016 &Computer
2017 &Application
2018 &Component
2019 &User
2020 &Role
2021 Add
2022 %d Items
2024 Single Thread Apartment
2025 Main Thread Apartment
2026 Thread Neutral Apartment
2027 Synchronization
2028 Warning
2029 The transaction level or just in time activation setting that was just selected is not compatible with the currently selected synchronization level. The synchronization level will be changed to a compatible level.
2030 Welcome to the %s
2031 Building component list...
2032 COM+ Component Install Wizard
2033 This wizard will help you to install or import components.
2034 The wizard has gathered all necessary information to perform the install.
2035 COM+ Application Install Wizard
2036 This wizard will help you to install or create new applications.
2037 The wizard has gathered all necessary information to perform the install.
2038 Import or install a component
2039 Install new components
2040 Choose Components to Import
2041 Create Empty Application
2042 Install or Create a New Application
2043 Application Installation Options
2044 Set Application Identity
2045 Select Application Files
2046 ...install a new component or import components that are already registered.\n
2047 Please specify the file(s) that contain the components you want to install.
2048 Please choose the components you want to import.
2049 Please specify the name of the new application.
2050 Please choose whether you want to install a pre-built application or create an empty application.
2051 Please specify the install directory and the role configuration.
2052 Please specify the application identity.
2053 Please specify the files that contain the application you want to install.
2054 Thank you for using the %s
2055 Pooled
2056 Call Time (ms)
2057 Minimum pool size must be less than the maximum pool size
2058 Service request failed with error code %1
2059 The service is not installed
2060 The identity or password set on the application is not valid
2061 Out of memory
2062 The application you are trying to export was not found. Press the refresh button to get the latest list of applications.
2063 An interface in the application you are trying to export is not registered. Make sure that the application was properly installed.
2064 Maximum pool size may not be set to zero
2065 Impersonation
2066 Default
2067 Anonymous
2068 Identify
2069 Impersonate
2070 Delegate
2071 PID
2072 COM+ Application Export Wizard
2073 This wizard will help you to export client or server applications.
2074 The application has been successfully exported.
2075 Application Export Information
2076 Please enter information required to export this application.
2078 If you change the activation of this application, certain properties will be reset to their default values once the activation setting has been saved.
2079 A system application's identity cannot be changed.
2080 Server Application Files (*.MSI)|*.MSI||
2081 Starting application(s)...
2082 Shutting down application(s)...
2083 A role assigned to a component, interface, or method did not exist in the application
2084 Importing components...
2085 Installing components...
2086 This application was set to run forever when the listener was enabled. You may wish to go to the advanced page and modify the shutdown time.
2087 If you save these changes and you have already exported this queued application you must export it again. Otherwise, clients will send unauthenticated messages which will get rejected by the QC listener.
2088 Object was not found in registry
2089 You may need to reinstall this component to restore the required registry settings.
2090 Either MSMQ is not installed or not running, or this application is not set to run as a queued application.
2091 Error %08X occurred.
2092 An unknown error occurred. You should check all documentation for a solution. If no further information is available, please contact technical support.
2093 Not specified (both assumed)
2094 Application Proxy Files (*.MSI)|*.MSI||
2095 DTC error %08X occurred.
2096 A problem occurred while interacting with the DTC service. You should verify that DTC is started and working properly.
2097 One of the objects being updated does not exist
2098 This operation can not be performed on the system application
2099 Certain operations cannot be performed on the system application. Please refer to the documentation for more information.
2100 Due to the selected transaction support level, JIT Activation and synchronization are required.
2101 An object being inserted or updated does not belong to a valid parent collection
2102 Subscription ID
2103 &Subscription
2104 Data
2105 COM+ New Subscription Wizard
2106 This wizard will help you to create a new subscription.
2107 The wizard has gathered all necessary information to create the subscription.
2108 Select Event Class
2109 Select the event class that implements the method(s).
2110 Select Subscription Method(s).
2111 Select the subscription method or methods.
2112 Subscription Options
2113 Set the subscription properties.
2114 Another version of this application is already installed. Installation of this version cannot continue. To remove the existing version, use Add/Remove Programs on the Control Panel.
2115 One or more of the components in this application were imported. As a result, those components do not contain interface and method information. Exporting this application may create an application which is unusable on other machines.
2116 You must have enabled components in an application in order to start the application
2117 Access denied
2118 The publisher ID must be specified because both "use all interfaces" and "use all event classes" were chosen
2119 ThreadingModel value has changed
2120 The ThreadingModel value found in the registry has been modified outside of the COM+ environment. You will need to reinstall this component.
2121 Process Dump
2122 The dump of the selected process succeeded. \nThe image was dumped to the default dump directory.
2123 &Partition
2124 Partition ID
2125 Pausing process(es)...
2126 Resuming process(es)...
2127 Copy the application '%s' from partition '%s' to the partition:
2128 Copy these %d applications to the partition:
2129 SOAP unavailable. IIS is not installed
2130 Please enter a service name.
2131 The service name entered has invalid characters. The '/' and '\' characters are not valid in service names.
2132 MMC could not enumerate existing services from the Service Control Manager. The service dependencies configuration list will not be available.
2133 This application has a dependency on a non-existent service. That dependency has been removed.
2134 A service already exists for this application. Configuring a new service will remove and replace the existing application service. Existing service settings will not be visible from this dialog. To change existing service settings use the Services MMC Snapin. Press OK to continue configuring a new service.
2135 Changing the transaction isolation level from 'Serialized' or 'Any' requires that all components called from this component have an isolation level less than or equal to the isolation level set for this component.
2136 Process ID
2137 Executable Name
2138 Paused
2139 The application %s cannot be stopped, because the following services depend on it, and are still running:
2140 Application ID
2141 Instance ID
2142 Type
2143 Set ID
2144 Default Partition
2145 Base Application Partition
2146 Information
2147 There are no local partitions available to add to the set.\n\nThe Add Partition to Set dialog will now exit.
2148 One or more of the specified users already exist in another local partition set.
2149 The files could not be imported because they were compiled for different processor types
2150 The files could not be imported because they were compiled for an unsupported machine type
2151 The files could not be imported because they were compiled for a different processor type than the components already installed in the application
2153 {}-1234567890abcdefABCDEF
2154 The CLSID entered is invalid.
2155 The ProgID entered is invalid. A ProgID may not begin with a digit.
2156 The catalog server threw an exception and could not process the request.
2157 Any
2158 Read Uncommitted
2159 Read Committed
2160 Repeatable Read
2161 Serialized
2162 Name
2163 msCOM-ObjectID
2164 (ObjectClass=msCOM-Partition)
2165 All visible directory partitions are currently present on this system.
2166 Error
2167 The following error occurred attempting to browse partitions on the domain\n\n%1
2168 User Browser
2169 Select user:
2170 The current user does not have the authority to browse partitions on the domain. To search as another user enter their username and password below.
2171 Please enter the username and password to be used when browsing domain partitions.
2172 No partitions are currently visible on the domain
2173 Description
2175 These COM components are registered to run as in-process servers. Select the components you want to import.
2176 These are the registered COM components. Select the components you want to import.
2177 &Legacy Component
2178 Legacy Component Import Wizard
2179 This wizard will help you import legacy components.
2180 Select users to assign default partition
2181 Promoting %s Legacy Components...
2185 &Configure My Computer\nConfigure My Computer
2186 Copying component(s)...
2187 Copying application(s)...
2188 The specified Partition ID is already in use by '%1'\nPlease use another Partition ID.
2191 Applications that run as services cannot use the interactive user identity.
2192 Library and Proxy applications do not have an identity.
2193 \
2194 NULL
2195 The CLSID %1, item %2 and title %3 has the named value AppID, but is not recorded under \\HKEY_CLASSES_ROOT\AppId. Do you wish to record it?
2196 DCOM Configuration Warning!
2197 Duplicate ProgID's are not allowed within the same partition. Please assign a new ProgID for the copied component.
2198 Duplicate CLSID's are not allowed within the same partition. Please assign a new CLSID for the copied component.
2199 CopyOf.
2200 Error
2201 The COM+ explorer was unable to locate information required to perform the requested action. This may be caused by running out of system resources such as memory.
2202
2203 The specified service name already exists. Please choose another name for the application service.
2204 Input out of range. Please enter a number between %1 and %2.
2205 Moving component(s)...
2206 The specified partition does not exist or you do not have permission to perform the requested action. Make sure that you are a member of a partition set that includes the partition you are trying to use.
2207 Please enter a number between %1 and %2 for the %3.
2208 Application Pool Size
2209 Maximum Concurrent Players
2210 Minimum Object Pool Size
2211 Maximum Object Pool Size
2212 Object Creation Timeout
2213 Transaction Timeout
2214 The "Run application as NT Service" option will not be available until this change is applied.
2215 Do you want to stop this service?
2216 Do you want to stop these services?
2217 The application %s cannot be stopped, because the following service depends on it, and is still running:
2218 The requested action cannot be performed because DTC is not running.
2219 Global
2220 Connection-oriented Netbios over TCP
2221 Connection-oriented Netbios over IPX
2222 Connection-oriented NetBEUI
2223 Connection-oriented TCP/IP
2224 Connection-oriented named pipes
2225 Connection-oriented SPX
2226 Connection-oriented DECnet transport
2227 AppleTalk DSP
2228 Connection-oriented Vines SPP transport
2229 Datagram UDP/IP
2230 Datagram IPX
2231 Windows Machine Name
2232 Four octet Internet address or DNS host name
2233 Internet Port Number
2234 Integer between 0 and 255. (0 - 32 reserved).
2235 Windows Server name (backslashes optional)
2236 Windows named pipe - start with "\\pipe"
2237 ... default system protocols ...
2238 Invalid endpoint format. Expecting \n%1.
2239 Integer between 0 and 65535
2240 IPX Internet address or Windows server name
2241 DECnet area and node syntax
2242 DECnet phase IV object number
2243 Windows machine name optionally followed by @ AT zone
2244 AppleTalk endpoint string (max 22 chars)
2245 StreetTalk server (item@group@organization)
2246 Vines SPP port number (250 - 511)
2247 Tunneling TCP/IP
2248 Select the DCOM network protocol sequence that you want to add. Enter the endpoint details and click OK when you have finished.
2249 Select DCOM protocol and endpoint
2250 Modify the endpoint details if desired and click OK when you have finished.
2251 DCOM Endpoint Properties
2252 Duplicate protocol.
2253 The legacy components in this application can not be exported in COM+ 1.O format.
2254 Library applications have the recycling and pooling properties of their host process.
2255 Applications running as a service cannot be pooled or recycled.
2256 Memory Limit
2257 Call Limit
2258 Activation Limit
2259 Lifetime Limit
2260 Expiration Timeout
2261 Server
2262 Invalid port range format: Use a single number such as 4000 or a range in the form xxxx-yyyy such as 4000-4010.
2263 Default Access Permission
2264 Default Launch Permission
2265 Access Permission
2266 Launch and Activation Permission
2267 Change Configuration Permission
2268 Multi Select
2269 Shutting down process(s)...
2271 Recycling
2272 Activation cannot be forced in the caller's or the default context when access checks are enforced.
2273 The Partition GUID is not a valid GUID. Please enter a GUID in the following form: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}
2274 The set of protocols and endpoints available for use by clients of this DCOM server. The system defaults entry indicates that the default set of DCOM protocols and endpoints for the machine will be used.
2275 Transaction List
2276 Transaction Statistics
2277 The name of this application already exists in the service control manager database either
\nas a service name or as another display name. Please choose another name.
2278 No partitions were found registered on the Domain.
2279 You must enable this application before attempting to start it.
2280 CLSID
2281 LocalServer32
2282 Local Service
2283 Local Server
2284 Local Path:
2286 Administrator
2287 Browse for folder
2288 Installed
2289 Changes have been disabled for this partition.
2290 Changes have been disabled for this application.
2291 The Base Application Partition has been marked changes disabled. Partitions are not currently visible. Partitions can be made visible by selecting the "View Partitions" item in the view menu.
2292 The wizard has gathered all necessary information to import the component.\n\nWARNING\nImporting a component does not register interface and method information necessary for correct operation of interface- and method-level Role-based Security and QC features. If your component requires these features, use Component Install instead.
2293 The wizard has gathered all necessary information to import the component.\n\nNOTE\nLegacy components do not have access to COM+ services such as object context, transaction, synchronization, etc.
2294 Recycling Process(es)
2295 NT Service
2298 ...install new component(s) or event class(es).
2299 Install a Component
2300 An account for this domain and user could not be found. Check that the user has a valid user account in the specified domain.
2301 The current authentication level is not supported for library applications. The authentication level will be changed to "Default".
2302 _LocalServer32
2303 LocalServer
2304 _LocalServer
2305 LocalService
2306 _LocalService
2307 Appid
2308 Copy Component(s)
2309 Components to copy:
2310 No applications were found that are valid destinations for the requested action.
2311 &Interactive user - the current logged on user
2312 &Local Service - Built-in service account.
2313 &Interactive User / Local Service - Server Applications will run as Interactive User,\nServices will run as Local Service.
2314 User %1 has already been assigned a default partition.
2323 This wizard will help you to install or create new partitions.
2324 The wizard has gathered all necessary information to perform the install.
2325 Install or Create a New Partition
2326 Please choose whether you want to install a previously exported partition or create an empty partition.
2327 Create Empty Partition
2328 Please specify the name of the new partition.
2329 Partition Installation Options
2330 Please specify the install directory.
2331 Select Partition Files
2332 Please specify the files that contain the partitions you want to install.
2333 Role
2334 Full Control
2335 Read
2336 Query Value
2337 Set Value
2338 Create Subkey
2339 Enumerate Subkeys
2340 Notify
2341 Create Link
2342 Delete
2343 Write DAC
2344 Write Owner
2345 Read Control
2347 Registry Value
2348 Partition Files (*.MSI)|*.MSI||
2349 Partition Export Information
2350 Please enter information required to export this partition.
2351 COM+ Partition Export Wizard
2352 This wizard will help you export a partition.
2353 The partition has been successfully exported.
2355 Server applications cannot run under system service accounts.
2356 Interactive User
2357 Network Service
2358 Local Service
2359 Local System
2385 Applications that are configured to run as a service and interact with the desktop must run under Local System.
2386 Context properties are ignored when activation context is forced.
2387 Any Application
2388 QC Trusted User
2389 Reader
2390 Server Application
2391 Activator
2392 System Application
2393 COM+ Utilities
2394 COM+ Explorer
2395 COM+ QC Dead Letter Queue Listener
2396 COM+ partitions are currently disabled.
2397 N&etwork Service - Built-in service account with network access
2398 Please add application roles.
2399 Add Application Roles
2400 Please add users to roles.
2401 Add Users to Roles
2402 Roles
2407 SSL required for secure publication
2408 Implement full COM+ security
2409 Expose component methods to any caller
2411 Local Access
2412 Remote Access
2413 Local Launch
2414 Remote Launch
2415 Local Activation
2416 Remote Activation
2417 Security Limits
2450 COM+ Event System
2451 Supports System Event Notification Service (SENS), which provides automatic distribution of events to subscribing Component Object Model (COM) components. If the service is stopped, SENS will close and will not be able to provide logon and logoff notifications. If this service is disabled, any services that explicitly depend on it will fail to start.
2701 &About DAC...
2702 Category
2703 Current
2704 Peak
2705 Average
2706 Status
2707 Unit of Work ID
2708 Isolation Level
2709 Severity
2710 Source
2711 Message
2712 Pause
2713 Continue
2714 Status: Unknown
2715 Status: Starting
2716 Status: Started %1
2717 Status: Stopping
2718 Status: Stopped
2719 Status: Pausing
2720 Status: Paused
2721 Status: Error
2722 Mi&nimize
2723 &Restore
2724 MS DTC Admin Console
2725 Could not initialize the UI Client Component.\n Terminating
2726 DTC Admin Console - Not Connected
2727 DTC Admin Console - Connected
2728 Num. Open:
2729 Num. Committed:
2730 Num. Aborted:
2731 Num. In Doubt:
2732 Num. Heuristic:
2733 DTC Admin Console - Connecting
2734 Cl&ose
2735 &General
2736 &Transactions
2737 Trac&e
2738 &Statistics
2739 &Advanced
2740 DTC Console Message
2741 Windows 95
2743 (active)
2745 (preparing)
2747 (prepared)
2749 (committing)
2751 (comitted)
2753 (aborting)
2755 (aborted)
2757 (in doubt)
2759 (heuristic commit)
2761 (heuristic abort)
2763 (heuristic danger)
2765 (heuristic damage)
2767 (forced commit)
2768 (forced abort)
2769 (committing)
2770 (only failed to notify)
2771 207
2772 143
2773 Parent / Subordinate
2774 ID
2775 &Reset
2776 (cannot notify commit)
2777 (cannot notify abort)
2778 <no parent>
2780 MSDTC
2781 Invalid log size.
2782 Please enter a log size of 1 MB or more.
2783 Uncommitted changes
2784 Changes to the configuration have not been applied. \n\nContinue without applying changes?
2785 Cannot set the default coordinator to be this computer.\nYou have to re-install the MS DTC server to reset the default coordinator setup.
2786 Could not load the contact manager component needed to access registry functions.
2787 A default transaction coordinator already exists in your local registry.\nReplace existing entry ?
2788 The network computer you have selected does not have a transaction coordinator installed. Please try a different computer.
2793 TCP/IP
2794 SPX
2795 NetBEUI
2796 at %1 - %2
2797 Distributed Transaction Coordinator
2798 Coordinates transactions that span multiple resource managers, such as databases, message queues, and file systems. If this service is stopped, these transactions will not occur. If this service is disabled, any services that explicitly depend on it will fail to start.
2799 Invalid log location. Please select a local fixed device for the location of the log.
2800 Invalid log location. The log file must be located on a shared cluster device.
2801 Invalid log size. The log file must be between 1Mb and 512MB in size.
2802 Working...
2803 Select Computer
2804 Unable to load netapi32.dll
2805 Unable to load a system function from netapi32.dll
2806 Error opening the key for workgroup in the system registry.\nPlease contact Microsoft product support (error: %d).
2807 Error reading the value for workgroup in the system registry.\nPlease contact Microsoft product support (error: %d).
2808 Failed to copy the MS DTC log file to the shared disk. Please contact product support.
2809 An error occurred while trying to read information about any previous installations of MS DTC. Please contact product support.
2810 An error occurred while trying to read information about any previous cluster-aware installations of MS DTC. Please contact product support.
2811 Failed to get a list of the virtual servers in the cluster. Please contact product support.
2812 Failed to get a list of the shared disks in the cluster. Please contact product support.
2813 Setup found that the current configuration of the cluster does not contain any resource groups in which the MS DTC resource can be created. Setup of MS DTC requires that the cluster contain at least one resource group that contains both a network name resource and a shared disk resource. Setup also requires that this resource group be owned by the first node in the cluster on which setup is run. Please re-run setup after the appropriate changes to the cluster configuration have been made.
2814 Setup found that none of the network name resources are owned by this node and that this is the first time that setup was run on any node in the cluster. Setup of MS DTC requires that the cluster contain at least one resource group that contains both a network name resource and a shared disk resource. Setup also requires that this resource group be owned by the first node in the cluster on which setup is run. Please re-run setup after the appropriate changes to the cluster configuration have been made.
2815 Failed to create the MS DTC log file's directory. Please contact product support.
2816 Microsoft Distributed Transaction Coordinator Setup
2817 Failed to set the attributes on the MS DTC log file. Please contact product support.
2818 Failed to launch the MS DTC process. Please contact product support.
2819 Failed to install MS DTC on a master node in the cluster. Please contact product support.
2820 An unknown error occured while trying to install MS DTC. Please contact product support.
2821 Failed to install MS DTC on a secondary node in the cluster. Please contact product support.
2822 Failed to upgrade the MS DTC installation on the cluster. Please contact product support.
2823 Setup detected an incompatible version of MS DTC installed. Setup cannot continue installing MS DTC.
2824 Setup does not allow rolling upgrades of MS DTC. Setup is exiting.
2825 The first node on which MS DTC was installed is down. Please start that node and re-run setup.
2826 Failed to install MS DTC. Please contact product support.
2827 The MS DTC Setup completed sucessfully.
2828 Setup has sucessfully populated configuration information to allow MS DTC to run on this cluster node. Please run setup on all other nodes in the cluster before continuing.
2829 Setup failed because it was unable to completely remove all older versions of MS DTC. Please make sure that all applications using MS DTC are shut down and that the Control Panel window is closed. If this problem persists please contact product support.
2830 Setup determined that a newer version of MS DTC is installed, hence setup will exit without performing any changes.
2831 Setup failed because it was unable to install the performance counter extension for MS DTC. If this problem persists please contact product support.
2832 Failed to shutdown the MS DTC process. Please contact product support.
2833 Invalid log directory. The log location is not a valid directory name.
2834 Log directory does not exist. Do you wish to create a new directory?
2835 MS DTC service will be stopped and restarted. All dependent services will be stopped. Please press yes to proceed.
2836 MS DTC service has been restarted
2837 Please enter a valid account
2838 There is a mismatch between the passwords, please try again
2839 Failed to update the security attributes. Please examine the eventlog for further details.
2840 Failed to stop the MS DTC service. Please examine the eventlog for further details.
2841 Failed to restart the MS DTC service. Please examine the eventlog for further details.
2842 MS DTC service is in an unknown or uncontrollable state. Please try to stop the MS DTC service and try again
2843 A remote host machine must be specified.
2844 The specified remote host machine does not exist.
2845 The MSDTC service and all the services that depend on MSDTC service will be stopped.Do you wish to proceed?
2846 An MS DTC log file already exists in the selected directory. Resetting an existing MS DTC log file may cause your databases and other transactional resource managers to become inconsistent. Please review the MS DTC Administrator's Manual before proceeding. Do you wish to reset the existing MS DTC log file?
2847 Out of memory.
2848 Could not initialize the MS DTC Admin Console General Page
2849 Could not locate the MS DTC configuration interface.
2850 The size of the MS DTC log is invalid.
2851 Could not find the MS DTC log disk device. Please select a new location for the MS DTC log file.
2852 Insufficient disk space for the MS DTC log file.
2853 Could not connect to the MS DTC statistics component.
2854 Could not connect to the MS DTC transaction list.
2855 Failed to get the DTC log path. Please contact product support.
2856 Failed to get the DTC service name. Please contact product support.
2857 Local DTC
2858 Clustered DTCs
2859 An error occured attempting to recover from a previous error. DTC may not work correctly.
2860 Logging
2861 An error occured changing the DTC account. Please try again.
2862 Security
2863 The specified remote host name is too long.
2864 Select the folder that will contain the DTC log file.
2865 Tracing
2866 The specified maximum buffer count is out of range. Valid values are between 1 to 999.
2867 An error occured processing the transaction list from MSDTC. The list may not be correct.
2868 Failed to get the security configuration for the remote host.
2869 The specified remote host does not allow remote administration.
2946 KtmRm for Distributed Transaction Coordinator
2947 Coordinates transactions between MSDTC and the Kernel Transaction Manager (KTM).
2948 DCOM Machine wide settings
2949 You are about to modify machine wide DCOM settings, this will effect all the applications on the machine, some applications may not work correctly as a result.Update DCOM settings?
2950 DTC MMC Snap-in
2951 DTC MMC Property-sheet extension
3101 Distributed Transaction Coordinator
3102 Microsoft Distributed Transaction Coordinator Resource
