154 You can analyze only one volume at a time. Do you want to stop the current analysis and restart using a different volume?
156 You can defragment only one volume at a time. Do you want to stop the current defragmentation and restart using a different volume?
157 Disk Defragmenter
158 Disk Defragmenter
159 You should defragment this volume.
160 You do not need to defragment this volume.
161 Volume
162 Save Defragmentation Report
163 Text Files
164 All Files
166 &Analyze
167 &Defragment
168 &Pause
169 &Stop
171 Estimated disk usage before defragmentation:
172 Estimated disk usage after defragmentation:
173 Resizing Color Image
175 MountVol
177 Largest free space extent
178 Total movable files
179 Total unmovable files
180 Free space fragmentation
181 Total free space extent
182 Average free space per extent
189 Volume %1!s! has a 12-bit FAT partition.
\n
\nDisk Defragmenter does not support 12-bit FAT partitions. To use Disk Defragmenter, you must upgrade to a 16-bit FAT, FAT32, or NTFS file system.
402 This defragmenter engine works only on FAT and FAT32 file systems.
425 Disk Defragmenter does not support this NTFS partition.
506 The scan has been canceled because an error occurred in file:
507 The scan has been canceled because an error occurred in file:
517 Disk Defragmenter cannot continue prescan because there is corruption in file:
518 Disk Defragmenter cannot continue prescan because there is corruption in file:
519 Disk Defragmenter could not start.
520 Disk Defragmenter could not start.
593 On the command line, retype the drive letter followed by a colon (for example, C:).
594 Drive %1!s! might be corrupted.
\n
\nTo check and fix the drive, run chkdsk /f.
598 Disk Defragmenter cannot continue because an error has occurred. For information about the cause of the error, see the DfrgError.log file in the My Documents folder.
604 Disk Defragmenter cannot create a required resource. Please reinstall Disk Defragmenter.
607 Analysis is complete for:
630 Disk Defragmenter supports only FAT32 volumes that were created by Windows 2000 or later.
631 Disk Defragmenter does not support the version of NTFS installed on this volume. Only versions of NTFS created by Windows NT 3.1 or later are supported.
632 Contiguous files
633 Folders
634 Fragmented files
635 Free space
636 Page file
637 Reserved system space
638 Unmovable files
639 Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: %1!s!.
\n
\nPlease run Chkdsk /f.
645 File Name
646 Fragments
647 File Size
648 &Resume
650 View &Report
652 Analyze the selected volume
653 Defragment the selected volume
654 Pause analysis or defragmentation
655 Resume analysis or defragmentation
656 Stop analysis or defragmentation
659 Display the report
661 You must have Administrator privileges to defragment a volume.
662 Analysis report for volume %1!s! %2!s!
663 Defragmentation report for volume %1!s! %2!s!
665 Defragmenter Report
666 Analyze
667 Defragment
668 Pause
669 Resume
670 Stop
671 View Report
672 Defragmentation is complete for:
673 Defragmenting
674 Analyzing
675 Paused
676 Reanalyzing
677 Mounted at
678 Unmounted Volume
679 Creating color image...
680 Volume
681 Session Status
682 File System
683 Capacity
684 Free Space
685 % Free Space
686 Analyzed
687 Defragmented
688 Stopped
689 Analyzing...
690 Defragmenting...
691 Reanalyzing...
692 Disk Defragmenter cannot run on this volume type.
693 The volume is read-only
694 Re&fresh F5
695 Refreshes the Volume List
696 Windows Disk Defragmenter
\nCopyright (c) 2006 Microsoft Corp.
\n
697 1.0
698 Microsoft Corp.
699 This volume has changed. Restart the defragmentation or analysis.
701 Extension Snap-in
702 Defragments files and folders on local volumes
705 This version of Disk Defragmenter does not support running more than one instance.
706 Command line operation of Disk Defragmenter is not supported.
707 Help
708 Disk Defragmenter cannot run in a Terminal Server session.
711 Two or more parameters that could be a volume exist.
\nThere can be only one drive letter or volume mount point parameter.
712 Windows cannot connect to the Disk Defragmenter engine.
713 Windows cannot release the Disk Defragmenter engine.
714 Windows cannot initialize a synchronization event.
718 The following command line parameter is not recognized: %1!s!
\n
\n
720 Volume %1!s! has %2!d!%% free space, but only %3!d!%% is available for use by Disk Defragmenter (due to reserved system space). To run effectively, Disk Defragmenter requires at least %4!d!%% usable free space. There is not enough disk space to properly complete the operation. Delete some unneeded files on your hard disk, and then try again.
\n
\n
721 Volume %1!s! has only %2!d!%% free space available for use by Disk Defragmenter. To run effectively, Disk Defragmenter requires at least %3!d!%% usable free space. There is not enough disk space to properly complete the operation. Delete some unneeded files on your hard disk, and then try again.
\n
\n
722 The connection to the defragmenter engine has been lost. Restart defragmentation.
723 System resources are too low to display the graphic.
725 Files that cannot be defragmented
726 &Close
727 &OK
728 More &Info...
729 Volume %1!s! has %2!d!%% free space, but <1%% is available for use by Disk Defragmenter (due to reserved system space). To run effectively, Disk Defragmenter requires at least %3!d!%% usable free space. There is not enough disk space to properly complete the operation. Delete some unneeded files on your hard disk, and then try again.
\n
\n
730 Volume %1!s! has <1%% free space available for use by Disk Defragmenter. To run effectively, Disk Defragmenter requires at least %2!d!%% usable free space. There is not enough disk space to properly complete the operation. Delete some unneeded files on your hard disk, and then try again.
\n
\n
731 Defragmentation of %1!s! shutting down due to low power condition
734 Description: Locates and consolidates fragmented files on local volumes to
\n improve system performance.
\n
\nSyntax: %1!s! <volume> -a [-v]
\n %1!s! <volume> [{-r | -w}] [-f] [-v]
\n %1!s! -c [{-r | -w}] [-f] [-v]
\n
\nParameters:
\n
\nValue Description
\n
\n<volume> Specifies the drive letter or mount point path of the volume to
\n be defragmented or analyzed.
\n
\n-c Defragments all volumes on this computer.
\n
\n-a Performs fragmentation analysis only.
\n
\n-r Performs partial defragmentation (default). Attempts to
\n consolidate only fragments smaller than 64 megabytes (MB).
\n
\n-w Performs full defragmentation. Attempts to consolidate all file
\n fragments, regardless of their size.
\n
\n-f Forces defragmentation of the volume when free space is low.
\n
\n-v Specifies verbose mode. The defragmentation and analysis output
\n is more detailed.
\n
\n-? Displays this help information.
\n
\nExamples:
\n
\n%1!s! d:
\n%1!s! d:\vol\mountpoint -w -f
\n%1!s! d: -a -v
\n%1!s! -c -v
\n
735 Defragmentation was cancelled by the user.
736 A defragmentation or volume shrink operation is already in progress. Only one of these operations can run at a time.
\nWait until the current process finishes and then try again.
\n
737 Out of memory. Please close some applications and try again.
738 Do you want to run Disk Defragmenter now anyway?
739 The volume identifier is not valid. The volume identifier must be a valid local drive letter or mount point.
\n
740 The connection to the defragmenter engine has been lost.
\nRestart defragmentation from the command line as shown below, or run Disk Defragmenter from Windows.
\n
741 Windows Disk Defragmenter
\nCopyright (c) 2006 Microsoft Corp.
\n
742 There is not enough free space in the volume to run Disk Defragmenter.
743 Compacting Files
744 Moving File
745 Defragmentation of %1!s! has been aborted due to inconsistencies that were detected in the filesystem. Please run CHKDSK or SCANDISK on %2!s! to repair these inconsistencies, then run Disk Defragmenter again.
746 Paused for Volume Shadow Copy
747 Defragmentation is complete for:
748 Some files on this volume could not be defragmented.
\nPlease check the defragmentation report for the list of these files.
\n
749 Defragmentation report for:
750 Note: On NTFS volumes, file fragments larger than 64MB are not included in the fragmentation statistics
\n
751 Disk Defragmenter was unable to save the report to file '%ws'
\n
\nPlease make sure that the folder and filename are correct, and that the folder is accessible.
\n
\nSelect OK to specify another location, or Cancel to continue without saving the report.
\n
752 The volume is on a disk that is reported to be failing.
753 The volume is marked as dirty. you must run chkdsk on the volume to correct any problems before you attempt to defragment it again.
754 This program needs to run with administrative permissions. Use an administrator command prompt and then run the program again.
800 Microsoft Corporation
801 Microsoft Corporation
802 This task defragments the computers hard disk drives.
