home *** CD-ROM | disk | FTP | other *** search
-
- This CD-ROM contains images of the diskettes used to install
- and troubleshoot UnixWare 7.
-
- The diskette images are:
- ______________________________________________________________________
-
- boot.image.C.1 UnixWare 7.0.1 Installation Diskette 1 of 2
- boot.image.C.2 UnixWare 7.0.1 Installation Diskette 2 of 2
- hba.image UnixWare 7.0.1 Host Bus Adapter Diskette
-
- These diskettes are provided with the media kit; the images
- are available here in case you misplace them.
- ______________________________________________________________________
-
- magic.image Magic Diskette
-
- This diskette is used for installation troubleshooting and
- is generally not required.
- ______________________________________________________________________
-
- netinstall.image.1 Network Installation Diskette 1
- netinstall.image.2 Network Installation Diskette 2
-
- These diskettes are required if you want to install UnixWare 7
- from a configured Install Server.
- ______________________________________________________________________
-
- Creating the diskettes: UnixWare
-
- From your UnixWare system:
-
- 1. Log onto the system as root.
-
- 2. Mount the CD-ROM. Enter:
-
- mount -F cdfs -r /dev/cdrom/cCbBtTlL /mnt
-
- where C, B, T, L are the controller, bus, target (SCSI ID), and
- logical unit number (LUN) of your CD-ROM device.
- _______________________________________________________________________
-
- NOTE In many cases, you can substitute the wildcard * in place
- of the full device name; for example /dev/cdrom/*.
- _______________________________________________________________________
-
- 3. Enter:
-
- cd /mnt/info/images/
-
- 4. Format a blank diskette, by entering it into the primary
- diskette drive and entering:
-
- format -V /dev/rdsk/f03ht
-
- You can skip this step if the disk is already formatted.
-
- 5. Copy the desired image onto the diskette, by entering:
-
- dd if=<image> of=/dev/rdsk/f03ht bs=512k
-
- <image> is the name if the image from the list above.
-
- 6. Verify the checksum, by comparing the value listed in
- /mnt/info/images/sums.txt with the results of this command:
-
- sum -r /dev/rdsk/f03ht
-
- The checksums should match. If they do not, your diskette
- may be damaged. Repeat steps 4-6 with a different diskette.
-
- ______________________________________________________________________
-
- Creating the diskettes: OpenServer
-
- From your OpenServer system:
-
- 1. Log onto the system as root.
-
- 2. Mount the CD-ROM. Enter:
-
- mount -f ISO9660 -r /dev/cd0 /mnt
-
- 3. Enter:
-
- cd /mnt/info/images/
-
- 4. Format a blank diskette, by entering it into the primary
- diskette drive and entering:
-
- format /dev/rfd0135ds18
-
- You can skip this step if the disk is already formatted.
-
- 5. Copy the desired image onto the diskette, by entering:
-
- dd if=<image> of=/dev/rfd0135ds18 bs=32b
-
- <image> is the name if the image from the list above.
-
- 6. Verify the checksum, by comparing the value listed in
- /mnt/info/images/sums.txt with the results of this command:
-
- sum -r /dev/rfd0
-
- The checksums should match. If they do not, your diskette
- may be damaged. Repeat steps 4-6 with a different diskette.
-
-