home *** CD-ROM | disk | FTP | other *** search
/ PC World Komputer 1999 March / PCWK3A99.iso / Modem / Modemd32 / _SETUP.1 / MDRW95.exe / 0 / string.txt next >
Encoding:
Text File  |  1998-05-30  |  10.8 KB  |  307 lines

  1. 10000    Modem Doctor Warning
  2. \n
  3. \n The Flow Control settings in the driver are incorrect. The driver should be set for RTS/CTS mode, but it is not. Your driver may not be Windows Compatible. Modem may fail the following diagnostic tests.
  4. 10001    Modem Doctor Warning
  5. \n
  6. \n The Carrier Detect Line from modem to driver is active. This needs to be reset with the command AT&C1. Modem Doctor will do this and continue testing.
  7. 10003    Modem Doctor Warning
  8. \n
  9. \n The CTS handshake line between modem and drive is inactive. Either you have a bad cable or your modem is off.Modem Doctor will continue testing. If there are errors, run driver diagnostics.
  10. 10004    Modem Doctor Warning
  11. \n
  12. \n You pressed the abort key during testing. Test results may be incorrect. To properly test, you need to wait until testing is completed.
  13. 10005    FIXED LINK ADVISORY
  14. \n
  15. \n Your modem's DTE rate between computer and modem is not locked. I had to lower the baud rate to match the link rate. For high-speed modems, the DTE rate must be locked. Check your modem manual for instructions.
  16. 10006    Modem Doctor Warning
  17. \n
  18. \n This command is available only in the Registered Version of the program. Select INFO and Order Form to find out how to register your copy.
  19. 10007    Modem Doctor Warning
  20. \n
  21. \n You have not selected a port for testing. Please return to the setup menu and select a port.
  22. 10008    Modem Doctor Warning
  23. \n
  24. \n No Fax Capabilities were detected during testing. You need at least a Class 1 Faxmodem in order to run these tests.
  25. 10009    RTS/CTS Handshaking
  26. \n Handshaking instructs your modem when and when not to send characters to your program. Proper operation is necessary for high-speed modems. Modem Doctor will use your current settings or send the proper commands for this test.
  27. 10010    XON/XOFF Handshaking
  28. \n Handshaking instructs your modem when and when not to send characters to your program. Proper operation is necessary for high-speed modems. Modem Doctor will use your current settings or send the proper commands for this test.
  29. 10200    Carrier Test
  30. \n
  31. \n This test simulates an on-line connection, and sends all 255 ASCII characters to your modem. All characters may not print, but their codes are verified.
  32. \n
  33. \n Press OK if you wish to run this test.
  34. 10201    ASCII Loopback Test
  35. \n
  36. \n This test simulates an on-line connection, and sends all 255 ASCII characters to your modem/serial port. All characters may not print, but their codes are verified.
  37. \n
  38. \n Press OK if you wish to run this test.
  39. 10202    Data Pattern Test
  40. \n
  41. \n This test sends a test sequence to your modem/serial port. The pattern is a special sequence of ASCII characters meant to stress the serializing process
  42. \n
  43. \n Press OK if you wish to run this test.
  44. 10203    Alt Data Test
  45. \n
  46. \n This test sends an alternating test sequence to your modem/serial port. The pattern is an alternating pattern of binary data meant to stress the serializing process
  47. \n
  48. \n Press OK if you wish to run this test.
  49. 61440    Cannot assign a %s to a %s
  50. 61441    Cannot create file %s
  51. 61442    Cannot open file %s
  52. 61443    Stream read error
  53. 61444    Stream write error
  54. 61445    Out of memory while expanding memory stream
  55. 61446    Can't write to a read-only resource stream
  56. 61447    WriteObject called twice for the same instance
  57. 61448    Class %s not found
  58. 61449    Invalid stream format
  59. 61450    Resource %s not found
  60. 61451    Resource %s is of incorrect class
  61. 61452    List index out of bounds
  62. 61453    Operation not allowed on sorted string list
  63. 61454    String list does not allow duplicates
  64. 61455    Tab index out of bounds
  65. 61456    A component named %s already exists
  66. 61457    ''%s'' is not a valid component name
  67. 61458    A class named %s already exists
  68. 61459    ''%s'' is not a valid integer value
  69. 61460    Line too long
  70. 61461    Invalid property value
  71. 61462    Invalid property path
  72. 61463    Property does not exist
  73. 61464    Property is read-only
  74. 61465    Error reading %s.%s: %s
  75. 61466    Ancestor for '%s' not found
  76. 61467    Bitmap image is not valid
  77. 61468    Icon image is not valid
  78. 61469    Metafile is not valid
  79. 61470    Bitmap is empty
  80. 61471    Cannot change the size of an icon
  81. 61472    Unknown picture file extension (.%s)
  82. 61473    Unsupported clipboard format
  83. 61474    Out of system resources
  84. 61475    Canvas does not allow drawing
  85. 61476    Invalid image size
  86. 61477    Too many images
  87. 61478    Image dimensions do not match image list dimensions
  88. 61479    Invalid ImageList
  89. 61480    Unable to Replace Image
  90. 61481    Invalid ImageList Index
  91. 61482    Error creating window device context
  92. 61483    Client of TDrag not initialized
  93. 61484    Error creating window class
  94. 61485    Error creating window
  95. 61486    Cannot focus a disabled or invisible window
  96. 61487    Control '%s' has no parent window
  97. 61488    Cannot hide an MDI Child Form
  98. 61489    Cannot change Visible in OnShow or OnHide
  99. 61490    Cannot make a visible window modal
  100. 61491    Scrollbar property out of range
  101. 61492    %s property out of range
  102. 61493    Menu index out of range
  103. 61494    Menu inserted twice
  104. 61495    Sub-menu is not in menu
  105. 61496    Not enough timers available
  106. 61497    Printer is not currently printing
  107. 61498    Printing in progress
  108. 61499    Printer index out of range
  109. 61500    Printer selected is not valid
  110. 61501    %s on %s
  111. 61502    GroupIndex cannot be less than a previous menu item's GroupIndex
  112. 61503    Cannot have more than one MDI form per application
  113. 61504    Cannot create form. No MDI forms are currently active
  114. 61505    Invalid component registration
  115. 61506    Can only modify an image if it contains a bitmap
  116. 61507    A control cannot have itself as its parent
  117. 61508    OK
  118. 61509    Cancel
  119. 61510    &Yes
  120. 61511    &No
  121. 61512    &Help
  122. 61513    &Close
  123. 61514    &Ignore
  124. 61515    &Retry
  125. 61516    Abort
  126. 61517    &All
  127. 61518    Cannot drag a form
  128. 61519    PutObject to undefined item
  129. 61520    Could not load CARDS.DLL
  130. 61521    Duplicate CardId found
  131. 61522    An error returned from DDE  ($0%x)
  132. 61523    DDE Error - conversation not established ($0%x)
  133. 61524    Error occurred when DDE ran out of memory ($0%x)
  134. 61525    Unable to connect DDE conversation
  135. 61526    FB
  136. 61527    FG
  137. 61528    BG
  138. 61529    Cannot load older version of TShape
  139. 61530    Metafiles
  140. 61531    Enhanced Metafiles
  141. 61532    Icons
  142. 61533    Bitmaps
  143. 61534    Grid too large for operation
  144. 61535    Too many rows or columns deleted
  145. 61536    Grid index out of range
  146. 61537    Fixed column count must be less than column count
  147. 61538    Fixed row count must be less than row count
  148. 61539    %s on line %d
  149. 61540    Identifier expected
  150. 61541    String expected
  151. 61542    Number expected
  152. 61543    ''%s'' expected
  153. 61544    %s expected
  154. 61545    Invalid numeric value
  155. 61546    Invalid string constant
  156. 61547    Invalid property value
  157. 61548    Invalid binary value
  158. 61549    Outline index not found
  159. 61550    Parent must be expanded
  160. 61551    Invalid value for current item
  161. 61552    Invalid input value
  162. 61553    Invalid input value.  Use escape key to abandon changes
  163. 61554    Invalid outline index
  164. 61555    Incorrect level assignment
  165. 61556    Invalid selection
  166. 61557    File load error
  167. 61558    Line too long
  168. 61559    Maximum outline depth exceeded
  169. 61560    Warning
  170. 61561    Error
  171. 61562    Information
  172. 61563    Confirm
  173. 61564    &Yes
  174. 61565    &No
  175. 61566    OK
  176. 61567    Cancel
  177. 61568    &Help
  178. 61569    No help available
  179. 61570    Help
  180. 61571    &Abort
  181. 61572    &Retry
  182. 61573    &Ignore
  183. 61574    &All
  184. 61575    BkSp
  185. 61576    Tab
  186. 61577    Esc
  187. 61578    Enter
  188. 61579    Space
  189. 61580    PgUp
  190. 61581    PgDn
  191. 61582    End
  192. 61583    Home
  193. 61584    Left
  194. 61585    Up
  195. 61586    Right
  196. 61587    Down
  197. 61588    Ins
  198. 61589    Del
  199. 61590    Shift+
  200. 61591    Ctrl+
  201. 61592    Alt+
  202. 61593    (Unknown)
  203. 61594    (None)
  204. 61595    Value must be between %d and %d
  205. 61596    Cannot create a default method name for an unnamed component
  206. 61597    Invalid argument to date encode
  207. 61598    Invalid argument to time encode
  208. 61599    ''%s'' is not a valid date
  209. 61600    ''%s'' is not a valid time
  210. 61601    ''%s'' is not a valid date and time
  211. 61602    Invalid file name - %s
  212. 61603    All files (*.*)|*.*
  213. 61604    All
  214. 61605    : [ - no volume label - ]
  215. 61606    Unable to insert a line
  216. 61607    The specified directory does not exist. Create it?
  217. 61608    Select Directory
  218. 61609    Directory &Name:
  219. 61610    D&rives:
  220. 61611    &Directories:
  221. 61612    &Files: (*.*)
  222. 61613    Ne&twork...
  223. 61614    Color
  224. 61615    ABCDEFGHIJKLMNOP
  225. 61616    Invalid clipboard format
  226. 61617    Clipboard does not support Icons
  227. 61618    Default
  228. 61619    Text exceeds memo capacity
  229. 61620    Custom Colors
  230. 61621    Operation not supported on selected printer
  231. 61622    There is no default printer currently selected
  232. 61623    Unable to write to %s
  233. 61624    Bits index out of range
  234. 61625    (Untitled)
  235. 61626    Invalid data type for '%s'
  236. 61627    Failed to create key %s
  237. 61628    Failed to set data for '%s'
  238. 61629    Failed to get data for '%s'
  239. 61630    Synchronize called when main VCL thread in a WaitFor call
  240. 61631    Unknown RichEdit conversion file extension (.%s)
  241. 61632    Menu '%s' is already being used by another form
  242. 61952    Tab control access error
  243. 61953    Invalid item level assignment
  244. 61954    Invalid index
  245. 61955    Unable to insert an item
  246. 61956    Invalid owner
  247. 61957    Unable to create new column
  248. 61958    Unable to create new item
  249. 61959    RichEdit line insertion error
  250. 61960    Failed to Load Stream
  251. 61961    Failed to Save Stream
  252. 61962    StatusBar cannot have more than 64 panels
  253. 61963    Error assigning Hot-Key to %s. %s
  254. 61964    Hot-Key is invalid
  255. 61965    Window is invalid or a child window
  256. 61966    Hot-Key is assigned to another window
  257. 61967    %s is already associated with %s
  258. 65408    '%s' is not a valid integer value
  259. 65409    '%s' is not a valid floating point value
  260. 65410    '%s' is not a valid date
  261. 65411    '%s' is not a valid time
  262. 65412    '%s' is not a valid date and time
  263. 65413    Invalid argument to time encode
  264. 65414    Invalid argument to date encode
  265. 65415    Out of memory
  266. 65416    I/O error %d
  267. 65417    File not found
  268. 65418    Invalid filename
  269. 65419    Too many open files
  270. 65420    File access denied
  271. 65421    Read beyond end of file
  272. 65422    Disk full
  273. 65423    Invalid numeric input
  274. 65424    Division by zero
  275. 65425    Range check error
  276. 65426    Integer overflow
  277. 65427    Invalid floating point operation
  278. 65428    Floating point division by zero
  279. 65429    Floating point overflow
  280. 65430    Floating point underflow
  281. 65431    Invalid pointer operation
  282. 65432    Invalid class typecast
  283. 65433    Access violation at address %p. %s of address %p
  284. 65434    Stack overflow
  285. 65435    Control-C hit
  286. 65436    Privileged instruction
  287. 65437    Operation aborted
  288. 65438    Exception %s in module %s at %p.\n%s%s
  289. 65439    Application Error
  290. 65440    Format '%s' invalid or incompatible with argument
  291. 65441    No argument for format '%s'
  292. 65442    Invalid variant type conversion
  293. 65443    Invalid variant operation
  294. 65444    Variant method calls not supported
  295. 65445    Read
  296. 65446    Write
  297. 65447    Format result longer than 4096 characters
  298. 65448    Format string too long
  299. 65449    Error creating variant array
  300. 65450    Variant is not an array
  301. 65451    Variant array index out of bounds
  302. 65452    External exception %x
  303. 65472    Jan
  304. 65473    Feb
  305. 65474    Mar
  306. 65475    Apr
  307. 65476    May
  308. 65477    Jun
  309. 65478    Jul
  310. 65479    Aug
  311. 65480    Sep
  312. 65481    Oct
  313. 65482    Nov
  314. 65483    Dec
  315. 65488    January
  316. 65489    February
  317. 65490    March
  318. 65491    April
  319. 65492    May
  320. 65493    June
  321. 65494    July
  322. 65495    August
  323. 65496    September
  324. 65497    October
  325. 65498    November
  326. 65499    December
  327. 65504    Sun
  328. 65505    Mon
  329. 65506    Tue
  330. 65507    Wed
  331. 65508    Thu
  332. 65509    Fri
  333. 65510    Sat
  334. 65511    Sunday
  335. 65512    Monday
  336. 65513    Tuesday
  337. 65514    Wednesday
  338. 65515    Thursday
  339. 65516    Friday
  340. 65517    Saturday
  341.