1830 Cannot find the Windows NT domain controller. Specified domain is invalid or the controller may be down.
1840 The computer does not have enough memory.
1841 There is not enough space on the device.
1842 An unexpected, unknown system error has occurred.
1850 The required MAPI profile cannot be created because the file MAPISVC.INF cannot be modified.
1851 The Microsoft Exchange Server computer is unavailable.
1852 The contents of the container cannot be seen because the recalculation of the directory hierarchy is not yet complete. Try again in a few minutes.
1853 The description of this error is unavailable from the service provider.
1854 MAPI or an unspecified service provider.
1855 An unexpected, unknown error has occurred.
1856 You do not have the rights required to complete the operation.
1857 This version of the client application is incompatible with the version of Microsoft Exchange Server running on the server computer.
1858 The logon to the Microsoft Exchange Server computer failed.
1859 An internal processing error has occurred: there is a problem with the information store. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
1861 The object is no longer available. Press F5 to refresh the display, and then try again.
1862 Invalid parameters were passed to a MAPI call.
1863 The operation failed because another process is holding a needed resource.
1865 An empty table was passed to the MAPI call.
1866 The MAPI call failed.
1867 A required code page is not available for a MAPI call.
1868 The locale information is not compatible for a MAPI call.
1880 %s\n\n%s\nID no: %08lx
1881 %s\n\n%s\n\n%s\nID no: %08lx
1882 %s\n\nMicrosoft Windows NT\nID no: %#08lx
1883 %s\n\n%s\n\nMicrosoft Windows NT\nID no: %#08lx
2057 Microsoft Mail E-mail Address Generator for %s
2058 X.400 E-mail Address Generator for %s
2059 Internet E-mail Address Generator for %s
2060 cc:Mail E-mail Address Generator for %s
2061 Connector for cc:Mail
2062 Extension for MS Mail Connector for %s
2063 Extension for Internet Mail Service for %s
2064 Extension for cc:Mail Connector for %s
2065 Extension for Schedule+ Free/Busy Connector for %s
2066 Microsoft Schedule+ Free/Busy Connector
2067 E-Mail Address Generators
2068 One-Off Address Templates
2069 Details Templates
2070 Protocols
2071 Protocols
2072 HTTP (Web) Site Settings
2073 HTTP (Web) Settings
2074 LDAP (Directory) Site Defaults
2075 LDAP (Directory) Settings
2076 NNTP (News) Site Defaults
2077 NNTP (News) Settings
2078 POP3 (Mail) Site Defaults
2079 POP3 (Mail) Settings
2080 IMAP4 (Mail) Site Defaults
2081 IMAP4 (Mail) Settings
2082 Internet Mail Connector
2083 KM Server Mailbox
2084 KMSERVER
2085 CA
2086 Address Book Views
2087 Server Replication Status
2088 Mailbox Resources
2089 Public Folder Resources
2090 Folder Replication Status
2091 Logons
2093 Logons
2095 ImagePath
2098 Parameters
2099 UpdateProtocols
2100 Add Server Replica '%s'
2101 Replicating the local site with server '%s'...
2102 Update Server Replica '%s'
2103 Updating the Configuration container...
2104 Updating master naming contexts...
2110 Add Site Replica '%s'
2121 Verifying that server '%s' is inaccessible...
2122 Performing initial replication operations to remove server '%s'...
2130 Remove Site Replica '%s'
2147 Performing Directory Replication Update
2148 Updating %s on server '%s'...
2149 Requesting an update of %s, site '%s' on server '%s'...
2150 Connecting to server '%s'...
2155 Checking Knowledge Consistency
2156 Checking knowledge consistency on server '%s'...
2160 ncalrpc
2161 ncacn_ip_tcp
2162 ncacn_spx
2163 ncacn_np
2164 netbios
2165 ncacn_at_dsp
2166 ncacn_vns_spp
2170 Setup is not complete. If you quit now, this product will not be correctly installed. Do you want to quit the setup of this product?
2172 The server has already been deleted. If you cancel the operation now, knowledge consistency checking will not proceed until the next regularly scheduled time, and some references to the deleted server may remain.\n\nAre you sure you want to cancel this operation?
2173 The replication connector and one or more sites have already been removed. If you cancel now, knowledge consistency checking will not proceed until the next regularly scheduled time, and some references to the deleted objects may remain.\n\nAre you sure you want to cancel this operation?
2200 This server is busy replicating and cannot be written to at this time. You can browse, but wait a few minutes before writing.
2201 The template data format is not valid.
2202 The internal directory name cannot be formatted. Choose a smaller directory name.
2203 The server being added already exists in the directory on the server you're adding to. You must either completely remove it before continuing or choose another server to replicate with.
2204 The server '%s' already exists in site '%s'. You must either completely remove it before continuing, or choose another server to replicate with.
2205 Some of the selected objects have not been added to the destination container because they do not support the grouping attributes used by the destination address book view.
2206 The selected destination address book view is based on a Site or Server grouping. The Add to Address Book View tool cannot be used to move recipients between sites and servers.
2207 The Directory name value is too long.\nA Distinguished Name [DN] could not be generated for this object.\nPlease enter a different value.
2208 A Distinguished Name [DN] cannot be generated for this object.\nThe Directory prevents further objects of this type from being created at this level.
2209 There are too many levels of depth to the DN for this object.\nObjects cannot be created at this depth.
2586 Searching for recipients in the site with attribute set
2587 Updating %s to be in the appropriate view containers
2588 Initializing new view creation
2601 DS_E_ADMIN_LIMIT_EXCEEDED
2602 DS_E_AFFECTS_MULTIPLE_DSAS
2603 DS_E_ALIAS_DEREFERENCING_PROBLEM
2604 DS_E_ALIAS_PROBLEM
2605 DS_E_ATTRIBUTE_OR_VALUE_EXISTS
2606 DS_E_BAD_ARGUMENT
2607 DS_E_BAD_CLASS
2608 DS_E_BAD_CONTEXT
2609 DS_E_BAD_NAME
2610 DS_E_BAD_SESSION
2611 DS_E_BAD_WORKSPACE
2612 DS_E_BUSY
2613 DS_E_CANNOT_ABANDON
2614 DS_E_CHAINING_REQUIRED
2615 DS_E_COMMUNICATIONS_PROBLEM
2616 DS_E_CONSTRAINT_VIOLATION
2617 DS_E_DIT_ERROR
2618 DS_E_ENTRY_EXISTS
2619 DS_E_INAPPROP_AUTHENTICATION
2620 DS_E_INAPPROP_MATCHING
2621 DS_E_INSUFFICIENT_ACCESS_RIGHTS
2622 DS_E_INVALID_ATTRIBUTE_SYNTAX
2623 DS_E_INVALID_ATTRIBUTE_VALUE
2624 DS_E_INVALID_CREDENTIALS
2625 DS_E_INVALID_REF
2626 DS_E_INVALID_SIGNATURE
2627 DS_E_LOOP_DETECTED
2628 DS_E_MISCELLANEOUS
2629 DS_E_MISSING_TYPE
2630 DS_E_MIXED_SYNCHRONOUS
2631 DS_E_NAMING_VIOLATION
2632 DS_E_NO_INFORMATION
2633 DS_E_NO_SUCH_ATTRIBUTE_OR_VALUE
2635 DS_E_NO_SUCH_OPERATION
2636 DS_E_NOT_ALLOWED_ON_NON_LEAF
2637 DS_E_NOT_ALLOWED_ON_RDN
2638 DS_E_NOT_SUPPORTED
2639 DS_E_OBJECT_CLASS_MOD_PROHIB
2640 DS_E_OBJECT_CLASS_VIOLATION
2641 DS_E_OUT_OF_SCOPE
2642 DS_E_PROTECTION_REQUIRED
2643 DS_E_TIME_LIMIT_EXCEEDED
2644 DS_E_TOO_LATE
2645 DS_E_TOO_MANY_OPERATIONS
2646 DS_E_TOO_MANY_SESSIONS
2647 DS_E_UNABLE_TO_PROCEED
2648 DS_E_UNAVAILABLE
2649 DS_E_UNAVAILABLE_CRIT_EXT
2650 DS_E_UNDEFINED_ATTRIBUTE_TYPE
2651 DS_E_UNWILLING_TO_PERFORM
2652 DS_E_NO_CHANGES
2701 The maximum number of administrative connections to the server has been exceeded. Try again later or connect to a different server.
2702 This change affects more than one directory.
2703 The object referenced by this alias is not available.
2704 There is a problem with the object referenced by this alias.
2705 An internal processing error has occurred: the attribute or value exists. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2706 An internal processing error has occurred: invalid argument. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2707 An internal processing error has occurred: invalid object class. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2708 An internal processing error has occurred: invalid context. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2709 An internal processing error has occurred: invalid name. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2710 An internal processing error has occurred: invalid session. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2711 An internal processing error has occurred: invalid workspace. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2712 The directory is busy. Wait a few minutes and try again.
2713 An internal processing error has occurred: cannot abandon the operation. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2714 You must make a connection to the Microsoft Exchange Server computer.
2715 The Microsoft Exchange Server computer does not respond.
2716 An internal processing error has occurred: constraint violation. The value specified for an attribute is either too big, too small, or not valid.
2717 An internal processing error has occurred: directory information tree error. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2718 This entry already exists. You can modify the existing entry.
2719 An internal processing error has occurred: inappropriate authentication. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2720 An internal processing error has occurred: inappropriate matching. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2721 You do not have the permissions required to complete the operation.
2722 An internal processing error has occurred: invalid attribute syntax. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2723 An internal processing error has occurred: invalid attribute value. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2724 An internal processing error has occurred: invalid credentials. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2725 An internal processing error has occurred: invalid reference. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2726 An internal processing error has occurred: invalid object signature. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2727 An internal processing error has occurred: loop detected. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2728 An internal processing error has occurred: unknown directory error. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2729 An internal processing error has occurred: missing type. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2730 The directory is currently performing a replication operation which prevents completion of this operation. Wait a few minutes and then try again.
2731 An internal processing error has occurred: naming violation. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2732 An internal processing error has occurred: required information is not available. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2733 The attribute does not exist.
2734 The object cannot be found in the directory. This may be because replication has not completed.
2735 An internal processing error has occurred: invalid operation. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2736 An internal processing error has occurred: operation not valid on a non-leaf node. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2737 An internal processing error has occurred: operation not allowed on a relative distinguished name. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2738 An internal processing error has occurred: operation is not supported. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2739 An internal processing error has occurred: object classes cannot be modified. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2740 An internal processing error has occurred: object class violation. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2741 An internal processing error has occurred: out of scope. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2742 An internal processing error has occurred: protection required. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2743 An internal processing error has occurred: time limit exceeded. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2744 An internal processing error has occurred: time exceeded. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2745 The maximum number of operations has been reached.
2746 The maximum number of sessions has been reached.
2747 An internal processing error has occurred: directory unable to proceed. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2748 An internal processing error has occurred: information not available. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2749 An internal processing error has occurred: unavailable Crit. Ext. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2750 An internal processing error has occurred: undefined attribute type. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2751 An internal processing error has occurred: operation not supported. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2752 An internal processing error has occurred: no changes. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2753 This object has not yet been completely replicated or cannot be changed from this connection. Try connecting to a Microsoft Exchange Server computer in the same site as this object.
2760 No more results are available.
2766 An error occurred during file replication. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2768 An error occurred during file replication. Unable to find a file with the correct version number. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2769 An error occurred during file replication. Unable to find the extension .DLL file with the correct version number. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2770 %s - General Error (code %d)
2771 %s - Protocol Error (code %d)
2772 %s - Syntax Error (code %d)
2773 %s - End Of File Error (code %d)
2774 %s - Software Error (code %d)
2775 %s - Configuration Error (code %d)
2776 %s - Contention Error (code %d)
2777 %s - Error - Not Found (code %d)
2778 %s - Disk Space Error (code %d)
2779 %s - Unknown Error (code %d)
2780 %s - Out Of Memory (code %d)
2781 %s - Not Implemented (code %d)
2790 The e-mail address type '%s' is not valid. Do you want to continue generating e-mail addresses with other address types?
2791 The e-mail address type '%s' is not implemented. To view details of the error, use the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2792 E-mail addresses for address type '%s' were not generated because an exception occurred. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2793 E-mail addresses were not generated because an error occurred while loading the required .DLL file. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2794 Some e-mail addresses could not be generated. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2795 The named .DLL file is not valid for generating e-mail addresses.
2796 The .DLL file required for e-mail address generation could not be opened for verification because it could not be found in the expected location '%s'.
2797 A unique e-mail address could not be created.
2798 The e-mail address already exists. Provide a unique e-mail address.
2799 The e-mail address is not valid for this address type. Provide a valid e-mail address.
2801 The action could not be completed because the Microsoft Exchange Information Store service is unavailable. Be sure the service is running and you have network connectivity to the Microsoft Exchange Server computer.
2802 The object in the information store could not be found.
2803 You do not have the permissions required to complete the operation on the information store.
2804 An internal processing error has occurred. Try restarting the Microsoft Exchange Administrator program or the Microsoft Exchange Server computer, or both.
2805 The version of the Microsoft Exchange Information Store service is incompatible with the version of the Microsoft Exchange Administrator program. Make sure all components have matching versions.
2806 An internal processing error due to a bad parameter has occurred. Try restarting the Microsoft Exchange Administrator program or the Microsoft Exchange Server computer, or both.
2807 A .DLL file required to administer the Microsoft Exchange Information Store could not be loaded.
2808 There is not enough memory to perform this action.
2809 The server could not be found.
2810 The information store is paused.
2811 The information store is not paused.
2812 The recipient's private information store is not on this server.
2813 Mail delivery to the recipient has not been suspended.
2815 After moving a mailbox to a new server, you must wait a while before you can move it back to its previous server. Once cleanup operations are complete on the previous server, try again.
2816 A duplicate mailbox was found due to problems during a Move Mailbox procedure. The duplicate mailbox has been deleted. Try again later.
2817 The mailbox being moved has not been replicated to the destination server yet. Wait for replication to complete and try again.
2818 An internal processing error has occurred administering the information store. Try restarting the Microsoft Exchange Administrator program or the Microsoft Exchange Server computer, or both.
2821 Directory replication failed because an unspecified error has occurred with either the directory service or directory replication. Try again later.
2824 An invalid parameter was encountered during directory replication. Stop and then restart the directory service. Then try directory replication again.
2825 The directory service is busy. Wait a few minutes and then try again.
2826 An invalid distinguished name was encountered during directory replication. Try again later.
2827 An invalid naming context was encountered during directory replication. Try again later.
2828 The distinguished name already exists. Try the operation again. If the error recurs, try stopping the directory service and the Administrator program and then restarting them.
2829 An internal error has occurred during directory replication. Stop and then restart the directory service. Then try directory replication again.
2830 Directory replication failed because an unspecified error has occurred with either the directory service or directory replication. Try again later.
2831 The knowledge consistency checker has detected that a site can be replicated to this directory service from more than one source. Remove one source and run the knowledge consistency checker again.
2832 The directory service has already been installed. Remove all components and reinstall Microsoft Exchange Server.
2833 A connection could not be made to the remote directory service, possibly due to network failure. Be sure that both directory services are running and that your network is available, and then try connecting again.
2834 An invalid instance type was encountered during directory replication. Disregard this error message.
2835 Directory replication has stopped because the directory service has run out of memory. Increase virtual memory on the Microsoft Exchange Server computer or add physical memory. Then try directory replication again.
2836 An unknown handle was encountered during directory replication.
2837 Directory replication has encountered a problem with mail. Be sure the message transfer agent service has been started. To view details of the error, see the application event log in the Windows NT Event Viewer.
2838 A connection to the remote directory service could not be made. Try again later.
2839 You cannot add the reference because it already exists.
2840 You cannot delete this reference because it does not exist.
2841 The directory replica you are trying to delete is the source of a subsequent replica and cannot be deleted. On the DSA General property page, choose Check Knowledge Consistency.
2842 The directory database has reported an error. Use the Services icon in the Control Panel to stop and then start the Microsoft Exchange Directory Service.
2844 There is currently no consistency between directories. On the DSA General property page, choose Check Knowledge Consistency.
2846 The knowledge consistency check did not correct directory inconsistencies. Be sure the directory service is running, and then try again. If the error recurs, try stopping the directory service and the Administrator program and then restarting them. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer on which you checked knowledge consistency.
2847 The Knowledge Consistency Checker could not connect to the local directory server to start the check. Verify that the directory service is started.
2848 The knowledge consistency checker could not connect to a remote directory server. For more details see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer on which you checked knowledge consistency.
2850 The requested operation failed due to a permissions problem encountered while accessing a remote directory. Check that your account has permission to perform this operation. Then check that the directory service on this server has permission to set up replication on a remote directory. Both directory services must be running under the same service account, and the service account must have the Service Account Admin role on the site object.
2853 There is a schema mismatch between the directories in your site. Make sure they are installed with the same version of Microsoft Exchange Server.
2854 The replicator encountered an error in the mail transport. Try again later.
2855 The knowledge consistency checker is already running. If expected changes did not occur, try running it again later.
2856 The knowledge consistency checker has already been initialized.
2857 The directory replication update process was preempted by a higher priority replication task. Try again later.
2858 While you were requesting an operation, the directory service was in the process of shutting down. Restart the directory service and retry the operation.
2859 Knowledge consistency was checked and changes were made successfully.
2861 No e-mail address could be generated for this address type:
2862 No e-mail address could be generated for these address types:
2863 Use the E-mail Addresses property page to manually enter an e-mail address for this address type.
2864 Use the E-mail Addresses property page to manually enter e-mail addresses for these address types.
2865 Errors have occurred while generating e-mail addresses.
2866 No e-mail address could be generated for address type %hs, recipient %hs.
2867 The X.400 address could not be converted.
2868 The X.400 address syntax is not valid.
2869 An error occurred while processing an e-mail address. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2870 An exception in the e-mail address generation .DLL file prevented the e-mail addresses from being created. Contact your gateway supplier.
2871 An error occurred while processing an e-mail address. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2872 This type of e-mail address could not be created because the e-mail address generation .DLL file is not available.
2873 The X.400 address for the site is required for this operation, but has been removed from the site object. Use Raw Properties to edit the site object and replace the X.400 e-mail address.
2874 The Microsoft Mail e-mail address for the site is required for this operation, but has been removed from the site object. Use Raw Properties to edit the site object and replace the Microsoft Mail e-mail address.
2875 Some e-mail addresses could not be generated. To view details of the error, see the application event log in the Windows NT Event Viewer on the client computer.
2876 E-mail addresses for address type '%s' were not generated because an error occurred. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
2877 A compatible version of the .DLL file required to generate e-mail addresses of the address type '%hs' could not be found.
2878 The site addressing part of the e-mail address did not match the old site address
2879 The e-mail address generation DLL '%s' could not be validated due to a CPU type mismatch.
2880 The X.400 address could not be converted because a required code page is not available.
2881 The common name field of the recipient information was empty.
2890 Some operations did not complete successfully. Choose Check Knowledge Consistency on the DSA General property page. To view details of the error, see the application event log in the Windows NT Event Viewer.
2891 Some replication operations were not completed. Directories will be updated during normal replication updates. In the meantime, some directory services may not start or may fail. To view details of the error, see the application event log in the Windows NT Event Viewer.
2901 An internal processing error has occurred: No directory attributes were found. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2902 An internal processing error has occurred: No value was found for attribute type. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2903 An internal processing error has occurred: No attribute values were found. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2904 An internal processing error has occurred: No directory service entry was found. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2905 An internal processing error has occurred: No directory service entries were found. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2906 One or more expected attribute values are missing from an object.
2907 An attribute expected to be single-valued is multi-valued.
2908 An internal processing error has occurred: The RDN attribute was not found for an object in the schema. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2909 An internal processing error has occurred: A subordinate class is referencing itself as a superclass. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
2920 Loading Schema
2921 Searching for attributes...
2922 Parsing attributes...
2923 Searching for classes...
2924 Parsing classes...
2930 Label
2931 Edit
2932 List Box
2933 Combo Box
2934 Drop Down
2935 Check Box
2936 Group Box
2937 Button
2938 Page Break
2939 Radio Button
2940 Multi-Valued List Box
2941 Multi-Valued Drop Down
2950 The version is not valid for options information.
2951 Options
2952 First
2953 Last
2954 Initials
2955 1
2956 %First %Last
2957 %Last, %First
2958 %First %1Initials. %Last
2959 1
2960 %First%1Last
2961 %1First%Last
2962 %1First%1Initials%1Last
2971 The e-mail address is too long. It cannot be longer than 1124 characters.
2976 StyleColumnSeparator
2977 StyleQuoteSeparator
2978 StylePropertySeparator
2979 StyleCharacterSetANSI
2980 PermissionShowLeaf
2981 PermissionCustomSecurity
2982 PermissionDeleteAssoc
2983 PermissionDefaultDomain
2984 AssocMailbox
2985 DNGAutotextType
2986 DNGAutotextFormat
2987 ANGAutotextType
2989 ANGAutotextFormat
2990 UMXAlwaysCreate
2991 UMXAlwaysDelete
2992 UMXAlwaysPrompt
2993 DefaultServer
2994 DefaultContainer
2995 AdminLangID
2996 PermissionUseConnectedDomain
4100 Are you sure you want to delete \n '%s'?
4101 Are you sure you want to delete \n %d %s?
4102 An error occurred when trying to delete the Primary Windows NT account for %s. Make sure you have the right privilege to do so. Do you want to delete the mailbox anyway?
4103 Are you sure you want to delete Primary Windows NT account for \n '%s'?
4105 %s cannot be a member of both lists.
4106 Auto&forward to:
4107 Distribution list &members
4108 Distribution list &membership
4110 A&ccept messages from
4111 &Reject messages from
4112 Give Send On &Behalf Permission to
4113 What server do you want to connect to?
4115 All
4116 One or more of these recipients does not currently exist in the Directory. These recipients will not be displayed in the Address Book.\n
4117 This can be a result of incomplete Replication or Directory Import. Do you want to keep these non-existent recipients on this list?
4118 Direct &reports
4120 Some selected entries were not added because Direct Reports may only consist of Mailboxes and Custom Recipients.
4121 Member of DL
4125 CacheTrustedDomains
4127 You must choose a different recipient from the one you are currently modifying.
4130 Extension '%s' could not be loaded.
4131 The DLL is damaged.
4132 The DLL is obsolete. Contact your gateway/extension vendor.
4133 The extension '%s' could not be deinstalled.
4134 An error occurred trying to deinstall an extension on '%s'. Do you want to delete the object anyway?
4135 The Extension DLL passed an illegal argument.
4136 An error occurred deinstalling an extension DLL.
4137 Access was denied when trying to contact the Windows NT domain controller.
4150 Help is not available for this page.
4195 Hidden Recipient(s)
4200 Recipients
4201 Connections
4202 Monitors
4203 Directory Replication Connectors
4210 &Site servers:
4211 &Target servers:
4212 &Properties:
4213 %s cannot be removed from the list because it is not in the connected site.
4239 The Site Address you entered was modified during validation. Please verify the modified Site Address.
4240 Custom Address
4241 X.400 Address
4242 X400
4243 Microsoft Mail Address
4244 MS
4245 SMTP Address
4246 SMTP
4247 You must provide a value for the X.400 domain defined attribute Value field.
4248 You must provide a value for the X.400 domain defined attribute Type field.
4249 Other
4250 Are you sure you want to remove this e-mail address?
4251 Are you sure you want to remove this address space?
4252 Are you sure you want to replace the existing primary %s e-mail address?
4253 The address type or value was truncated.
4254 Vi&ew...
4255 None
4256 Auto naming rules lets you customize the display name and alias fields for new mailboxes. %First, %Initials, and %Last may be used to automatically enter information from the first name, initials, and last name fields. You can extract a selected number of characters from any field. For example, %1First gives you the first character from the first name field.
4257 Connect to server
4265 UserProtocolsHeader
4266 Protocol
4268 Recipient Enabled
4269 Server Enabled
4270 Settings
4274 yes
4275 no
4276 (unavailable)
4277 defaults
4278 custom
4279 (none)
4280 &Enable %s for this recipient (%s is %s on this server)
4282 enabled
4283 disabled
4285 Protocol settings cannot be displayed. Check that the connected server has been upgraded to version 5.0 or later, and that replication has been enabled for server protocol objects.
4300 Move Mailbox
4301 Moving folders belonging to '%s'...
4302 Creating new information store for '%s'...
4303 Opening the information store that belongs to '%s'...
4304 Move Mailbox
4305 Move mailbox to
4306 Do you really want to move the mailbox from server '%s' to server '%s'?
4307 Changing the home server or the store type before a user has downloaded their mail may result in lost mail.\n\nDo you want to continue?
4308 The mailbox '%s' already exists on server '%s'.
4309 The recipient '%s' is not a mailbox. Only mailboxes can be moved to another server.
4310 The mailbox '%s' is not in the site '%s'. Mailboxes can be moved to and from only the servers that are in the site to which you are connected.
4311 The mailbox is currently being moved by another administrator. You must wait for this operation to complete before moving this mailbox again.
4320 Add to Address Book View
4321 Adding recipient object %s to %s.
4322 &Add this item to the selected container:
4323 Add
4324 Initializing process to add user(s) to %s
4400 Add Child
4401 Modify User Attributes
4402 Modify Admin Attributes
4403 Send As
4404 Mailbox Owner
4405 Logon Rights
4406 Delete
4407 Replication
4408 Modify Permissions
4409 Search
4410 '%s' cannot be removed because it is the primary Windows NT account.
4411 '%s' cannot be removed because it is the owner of this distribution list.
4412 One or more of the accounts specified have been given the Search right. \nYou must first define an Anonymous Account on the DS Site Configuration object before an account can be granted the Search right.
4425 Primary Windows NT Account
4430 PermissionsHeader
4431 Account
4432 Role
4450 After this permissions change has been applied, you will no longer have Administrative rights on this object. Are you sure you want to do this?
4451 After this permissions change has been applied, you will no longer have the right to modify permissions on this object. Are you sure you want to do this?
4452 You have removed all security from this object, allowing anybody to modify it. Are you sure you want to do this?
4453 Removing the Replication right from the account %s will prevent future replication operations. Are you sure you want to do this?
4454 You are removing the account %s that is used by Exchange services. This will cause problems with the services. Are you sure you want to do this?
4455 The password for the Windows NT Account you just created has been set to %s. The user will be required to change the password upon first logon.
4456 The Windows NT Account you just created was given a blank password. The user will be required to change the password upon first logon.
4457 The Microsoft Exchange Server you have selected is part of a Microsoft Cluster Server. Cluster Server Service Account Passwords cannot be modified from this dialog. Please use the SERVICES applet in Control Panel to modify the Service Account Password.
4460 The new DLL(s) will not take effect until you close and reopen the property page.
4461 Select the Extension Library (DLL)
4462 The path already exists in the list.
4463 That is not a valid Extension DLL.
4464 The following error occurred while trying to verify the selected Extension DLL. '%s'.
4470 The message routing table should be recalculated to reflect possible changes in the directory. Do you want to recalculate the table now?
4471 It will take several minutes for the new routing information to be replicated across your site and then take effect.
4650 MBoxInfo
4651 Security
4700 General
4701 Schedule
4702 Permissions
4703 Distribution Lists
4704 E-mail Addresses
4705 Delivery Restrictions
4706 Delivery Options
4709 Advanced
4710 Templates
4711 Custom Attributes
4712 Extensions
4713 Security
4714 Address
4715 General
4716 Advanced
4717 Phone/Notes
4718 MS-DOS Templates
4719 Organization
4720 Diagnostics Logging
4721 General
4722 General
4723 Protocols
4724 Limits
4725 Auto Naming
4726 File Format
4801 The Directory Object %s cannot be deleted.
4802 Public folders cannot be deleted using the Administrator program. Use the Microsoft Exchange client to delete a public folder.
4803 Public folders cannot be duplicated.
4804 The directory object '%s' cannot be deleted.
4805 You must specify the name of a Microsoft Exchange Server computer.
4806 A problem occurred with the extension .DLL file, possibly due to memory shortage. Close some applications or windows, and try again.
4807 An error has occurred in the Microsoft Exchange extension in Windows NT User Manager.
4808 The list of Microsoft Exchange Server computers is not available because no Microsoft Exchange Server computer could be located.
4809 A duplicate object
4810 The object '%s'
4811 %s with the directory name '%s' already exists. Enter a unique directory name for this object.
4812 %s with the directory name '%s' already exists. Enter a unique alias name on the General property page for this mail recipient.
4813 %s with the directory name '%s' already exists. Enter a unique directory name on the Advanced property page for this mail recipient.
4814 You cannot set the home server for this mailbox because the private information store of the server you are connected to is not available. Microsoft Exchange Server will select another server in the site. You can change the home server for this mailbox using the Advanced property page.
4815 The Windows NT security descriptor read from Microsoft Exchange Server is not valid. Do you want to erase the invalid data?
4816 The Windows NT security descriptor read from Microsoft Exchange Server contains one or more invalid security identifiers (SIDs), which will be deleted from this security descriptor. However, if you choose Cancel on the property page, the invalid SIDs will not be deleted.
4817 When adding network accounts, the computer running Windows NT must be a member of a Windows NT domain.
4821 A connection could not be made to the Microsoft Exchange Server computer '%s'.
4825 '%s' is not a valid cost value. Choose a cost value from %d through %d.
4826 Recipient's Manager
4828 Age limits take precedence over deleted item retention time. Deleted items are permanently removed from the information store when the item's age surpasses the folder's age limit. This occurs even if the deleted item retention time has not been reached.
4829 Some of the folders affected by this operation might be configured with age limits.
4830 You must provide a value for the Type field.
4831 Do not use the colon character (:) in the Type field.
4833 You must provide a value for the Address field.
4835 All fields should not be left blank.
4838 This e-mail address is not valid. To view details of the error, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
4839 This e-mail address already exists in this organization.
4840 This is the home e-mail address of this custom recipient. It cannot be removed.
4842 ADMD (administrative management domain) is a required field for the X.400 address. In the ADMD (a) box, type a domain name for the X.400 site.
4843 Country is a required field for the X.400 address. In the Country (c) box, type a country code that is 2 alphabetic characters or 3 numeric digits.
4844 E-mail addresses of type X.400 cannot be removed.
4845 The e-mail address has too many characters. Non-X.400 addresses must contain no more than 128 characters.
4846 Other Address Properties
4847 X.400 Address Properties
4848 Microsoft Mail Address Properties
4849 Internet Address Properties
4850 The MS Mail address fields should not be blank.
4851 The E-mail address field should not be blank. Enter an address.
4852 New E-mail Address
4853 &Select an e-mail address type
4856 New Address Space
4857 &Select an address type
4859 An exception has occurred in an extension .DLL file. Contact your extension supplier.
4860 The system attendant on server '%s' could not recalculate the routing table
4861 Select a server from the list.
4870 You must select a mailbox or a custom recipient as a manager.\nDo you want to try again?
4900 Options
4910 None
4911 Minimum
4912 2
4913 Medium
4914 4
4915 Maximum
4950 DiagnosticsMessageFile
4951 Resources
4954 exgl32.dll
4955 MSExchange
4956 Microsoft Exchange Team
5005 Parameters
5006 LogDirectory
5007 LogFlushFreq
5008 OldLogsCleaningInterval(Days)
5009 TCP/IP Port
5700 The system attendant is not responding. It may be paused, or the version of the Administrator program may not match the version of the system attendant.
5701 Site
5702 Enterprise
5710 An unexpected exception occurred while recalculating the routing table. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
5711 The routing table is being recalculated.
5712 An initialization error has occurred, probably due to insufficient memory. Close some applications or windows, and try again.
5713 The routing table cannot be recalculated because the remote directory is unavailable. Try again later.
5714 The message transfer agent (MTA) information in the Windows NT Registry appears to be corrupted. Take steps to repair or restore the registry entries for the MTA.
5715 Critical system resources are unavailable, probably due to insufficient memory. Close some applications or windows, and try again.
5716 The routing information process did not respond in time. Try again later.
5717 One or more parameters passed for logging are not valid.
5718 Error in Decoding the ASN1 Log Data.
5719 Error: Illegal parameter.
5724 An error occurred in the Message Tracking decoding operation.
5725 Error in loading SAALOG.DLL for Msg Tracking Decode.
5726 A process for generating e-mail addresses is already in progress, and only one process can run at a time. Try again later.
5727 A request to stop e-mail address generation has been received. This process will be stopped momentarily, upon completion of address generation for the recipient currently in progress.
5728 The status of e-mail address generation cannot be checked because e-mail address generation is not currently in progress.
5729 During a bulk e-mail address update, a mismatch occurred between the old and new site addressing parts of the e-mail addresses.
5730 An error occurred while generating the offline Address Book. To view details, see the application event log in the Windows NT Event Viewer on the offline Address Book server.
5731 Error: The Knowledge Consistency Checker is non-operational.
5732 Unable to reset the e-mail address generation system on the System Attendant due to a timeout condition.
5733 A path to an extension exceeded the maximum path length.
5734 The file name for the extension may not include subdirectory elements.
5735 The extension for Microsoft Exchange Administrator's CPU type has not been installed in the site.
5736 The Microsoft Exchange System Attendant service is unavailable.
5737 An error occurred while loading the RAS phone book. To view details, see the application event log in the Windows NT Event Viewer on the Microsoft Exchange Server computer.
6100 Mail Message
6101 Windows NT Alert
6102 Launch a Process
6105 &Mailbox to notify (e.g. Administrator)
6106 C&omputer to alert (e.g. NT_COMPUTER)
6107 &Path name (e.g. c:\Foo.exe)
6110 %s %ls '%s' -> Send status: %s
6111 An error occurred during the escalation procedure.
6112 %s %s since %s %s
6113 ServerName
6114 Test message from monitoring
6115 The test notification could not be sent.
6116 Windows NT returned 'File not found'. This usually indicates the required service Alerter is not running.
6120 Configuration Name
6122 Not measured yet
6123 Not currently measured
6124 The option Start Monitor '%s' could not be processed successfully.
6125 Monitor %s
6126 Monitored server %s
6127 Monitored link %s
6128 %s (%s)
6130 %s: %d servers
6131 %s: %d links
6140 Unknown
6141 Running
6142 Warning
6143 Alert
6144 Maintenance
6150 &Monitored servers:
6151 Message subject &returned from
6152 Message subject or &body returned from
6153 Typically, you should use the left list. However, if you don't expect the full subject of the bounced message to be preserved, as in non-delivery reports, use the list on the right.
6154 N&one
6155 The object '%s' cannot be monitored and will be removed from the list
6156 Distribution lists and public folders cannot be monitored. Only single recipients can be monitored.
6157 Enter the allowable time differences between the computer where the monitor is running and the server being monitored. If the differences are exceeded, the monitored server will enter either a warning or an alert state. Optionally, the monitored server's clock can be synchronized.
6160 Monitor Log File
6161 MonitorLog
6162 EscalationProcess
6201 Availability
6202 Notification
6203 Servers
6204 Clock
6205 Actions
6206 Bounce
6207 Network
6208 Maintenance status
6301 NeedAlerter
6302 The Alerter service must be running on the sending computer to send pop-up notifications.
6303 NeedMessenger
6304 The Messenger service must be running on computer '%s' to receive message notifications. The current status of the Messenger service is '%s'.
6800 Microsoft Exchange Administrator is restarting the computer to bring the mail server back online.
6801 %s Repair Restart service %s: %s
6802 %s Repair Restart computer (for service %s): %s
6803 The service is starting.
6804 The computer is starting.
6805 %s Repair Set the clock of the remote computer: %s
6806 The Microsoft Exchange System Attendant service could not be started.
6807 The Microsoft Exchange System Attendant service is starting.
6808 The computer is not a Microsoft Exchange Server computer.
6809 The monitor could not write to the log file '%s'.
6810 The object '%s' could not be read
6820 The server is running.
6821 The service %s is not available. Its status is %s.
6822 The service %s cannot be measured. %s
6823 The clock is off by %s.
6824 %d services are not available.
6825 Bounced mail took %s.
6826 The service may take several minutes to process this request. The new status of the service will be picked up on the next monitoring pass.
6827 A message was due on %s.
6828 The link is operational.
6829 Notifications for server/link monitors will be sent only during the next polling interval after the notification time has expired.
6830 NotificationOnNextPass
6831 The entry already exists.
6832 The monitor may not be able to keep pace with all the monitored objects within the specified polling interval. Are you sure you want to save the current configuration?
6833 Values specified for one or more attributes are not valid.
6834 A notification will be sent when a monitored server enters an Alert state (or a Warning state, if 'Alert Only' is unchecked). Use the Test button to ensure this entry is configured properly.
6835 TotalTime %s
6836 The Microsoft Exchange Server computer you have selected is part of a Microsoft Cluster Server. You can continue to use Monitor Notifications, however Monitor Actions will be disabled.
6837 The Microsoft Exchange Server(s) you have selected to monitor are part of a Microsoft Cluster Server. Monitor Actions previously chosen will now be disabled.
6838 The server you are attempting to add to the Monitored Servers list is a Microsoft Cluster Server. The servers currently in the Monitored Servers list are not Microsoft Cluster Servers. You are not allowed to mix both types of servers in the same Monitored Servers list.
6839 The server you are attempting to add to the Monitored Servers list is not a Microsoft Cluster Server. The servers currently in the Monitored Servers list are Microsoft Cluster Servers. You are not allowed to mix both types of servers in the same Monitored Servers list.
7401 Administrators
7402 Passwords
7403 Enrollment
7405 Certificate Trust List
7406 Algorithms
7409 KMSCrossCertHeader
7410 Certificate name
7411 Issuer
7412 Expiration date
7413 *.CRT
7414 *.P7M
7415 Certificate Files (*.CRT)
7416 CRL Files (*.P7M)
7500 The mailbox is not enabled
7501 New
7502 Active
7503 Disabled
7504 Key recovery in progress
7505 Undefined
7511 The existing security token has been recovered.\n\n%s %s\n\n%s '%s'
7512 The recovery succeeded. A new security token has been created.\n\n%s %s\n\n%s '%s'
7515 The account '%s' could not be added
7516 The account '%s' could not be deleted
7517 The default Windows NT domain does not recognize the account '%s'. It will not be displayed but is still a valid Key Management server administrator account.
7519 Advanced security has been disabled.
7523 KMPasswordRemember(flag)
7524 KMPasswordRemember(mSec)
7525 Advanced security is not available for this site. Verify that you followed all the required setup steps to install advanced security.
7526 The mailbox must be fully created before you can enable advanced security. Choose Apply to create the mailbox, and then use the Security property page to enable advanced security.
7527 The client information could not be obtained
7528 Enter your current and new Key Management server passwords.
7529 The Key Management server name could not be obtained.
7540 The advanced security operation failed due to an unknown cause. Restart the Administrator program or the Key Management server, or both, and then try again.
7541 A Microsoft Exchange Client request for an advanced security certificate contains invalid data.
7542 Either the username or the password is incorrect. Perhaps you have typed your NT password. Please retype username and KM Server password. Letters in passwords must be typed using the correct case. Make sure that Caps Lock is not accidentally on.
7543 The advanced security operation failed due to an internal error on the Key Management server. Restart the Administrator program or the Key Management server, or both, and then try again.
7544 The Key Management server is unavailable. Make sure it is running and available on the network.
7545 You cannot delete the account that you are currently using.
7546 The Microsoft Security Service is currently in a paused state. Continue the service or try again later.
7548 You must enter a password with at least %d characters.
7549 The New password and the Verify password do not match.
7550 To set the multiple password policies, specify the number of administrator passwords required for each task. The required number of passwords must be greater than 0 and less than or equal to %d (%d is your total number of administrators).
7551 To ensure maximum security, the number of administrator passwords required to add administrators, delete administrators, or edit the multiple password policies must be equal to or greater than the number of administrator passwords required for all other tasks.
7552 You have entered an invalid number of administrators for a multiple password policy. Specify a number between %d and %d for each policy (%d is your total number of administrators).
7553 Changes made to multiple password policies must be saved or canceled. You must select OK, Cancel or Apply before selecting another property page.
7554 The user's temporary key is not included in the enrollment message. To include the temporary key, insert %%TOKEN%% in the welcome message.\n\n\nDo you want to send the user a message that does not contain the user's temporary key?
7555 Select a container in %s for bulk enrollment:
7560 This site is configured to use the KM Server in site '%s', on server '%s'. If you configure this site to use a different KM Server in this organization, existing users in your site may no longer be able to recover their security keys. You should ONLY proceed to point to a new KM Server if you plan to remove the existing KM Server and move the existing key archive database to this new KM Server. \n\n\nAre you sure you want to proceed with pointing this site to a new KM Server?
7561 Your custom enrollment message settings are about to be replaced with the default settings. All current customizations will be lost.
7562 Enrolling users in Advanced Security...
7570 The operation did not complete succesfully.
7571 You cannot delete any more administrators. The total number of administrators must be equal to or greater than the multiple password policy with the highest value. To change these policies, select the Passwords property page on the CA object.
7573 You cannot add the account that you are currently using.
7580 The user is in the wrong state for this operation.
7581 There is not enough memory to complete the operation.
7582 The given multiple password policies settings are not valid.
7583 The Key Management Server database operation failed.
7584 The operation is not supported.
7585 Unable to process the client security request. Retry the message.
7586 The Remote Procedure Call failed.
8050 Internet Mail Wizard
8051 The Internet Mail Service has already been installed on this server. Select another server in the site.
8052 TCP/IP was not detected on %s. The Internet Mail Service requires TCP/IP to start. To install TCP/IP, choose the Network icon in Control Panel on %s, or select another server.
8053 The directory service is not running on the selected server. Please start the service or select another server.
8054 The server you selected is running version 4.0 of Microsoft Exchange Server. The Internet Mail Service requires version 5.0 or later. Please select another server.
8055 The Windows NT account you are logged on to does not have sufficient rights to read or write to the registry on %s. Contact your Windows NT administrator, or select another server.
8056 The Internet Mail Service requires the DNS domain name to be configured on %s. To configure the domain name, use the Network icon in the Control Panel on %s, or select another server.
8057 For the Internet Mail Service to dial your Internet service provider (ISP), Remote Access Service (RAS) must be configured on %s. Include an Address Book entry for your ISP, with the TCP enabled for that entry.
8058 For the Internet Mail Service to connect to your Internet service provider (ISP), you must create an Address Book entry for your ISP.
8059 To configure the Internet Mail Service for a dial-up connection the Administrator program must be running on the same Microsoft Exchange Server computer that you will be running the Internet Mail Service on.
8060 The RAS phone book entry selected is not TCP enabled.
8061 DNS has not been fully configured on %s. To configure DNS, use the Network icon in the Control Panel on %s, or ensure that the computer can resolve host names through WINS, a host file, or some other mechanism.
8062 To configure the set of Internet addresses this server can send to, open the Internet Mail Service object and set the addresses in the Address Space property page. The Internet Mail Service cannot be started until you have configured the address space.
8063 Administrator Mailbox
8064 Synchronizing Directories...
8065 Are you sure you want to delete the Internet Mail Service on %s and any mail that is currently queued to go out?
8067 Administrator
8068 The host name entered is invalid.
8069 The Administrator mailbox is a required attribute.
8070 Updating routing information...
8071 Installing Internet Mail Service...
8072 Creating Administrator mailbox...
8073 Installing services and modifying the registry...
8074 Starting the service...
8075 To configure additional options, open the Internet Mail Service (%s) in the Configuration container using the Microsoft Exchange Administrator program.
8076 The Internet Mail Service has been successfully installed.
8077 The Internet Mail Service has been successfully installed and started.
8078 (Typical)
8079 For optimum performance it is recommended that you run the Microsoft Exchange Performance Optimizer on server %s.
8080 Deleting Internet Mail Service...
8091 NameServer
8093 Administrator
8094 SMTP
8096 ClientsUseSMIMESig
8097 The server you selected is a Microsoft Cluster Server. The Administrator program is unable to continue because some of the cluster services are not available.\nPlease ensure that the Cluster service is installed and running on the server, and that the cluster dll [%s] is available locally, and then retry the operation.
9000 RawMode
9002 Show the description of an Admin Status Code
9100 Microsoft Exchange Server Administrator
9101
9102 admin <options>
9103
9104 -d <ServerName> Server from which to import/export
9105 -e <Filename> Name of the file where exported entries are written
9106 -h Help on starting admin
9107 -i <Filename> Name of the file from where to import entries
9108 -m <[site]\monitor\server> Start the monitor, connecting to the specified server
9109 -n Disables the progress indicator during import/export
9110 -o <Filename> Name of the file containing options for import/export
9111 -r Enable Raw mode
9112 -s <ServerName> Connect to this server
9113 -u Reserved
9114
9115
9116
9117
9118
9119
10000 Type
10001 Pattern
10002 From
10003 Action
10004 Newsgroup/Message
10005 Received
10006 NEWGROUP
10007 RMGROUP
10008 Either
10009 Accept
10010 Delete
10011 Queue
10050 Newsfeeds
10051 Control Messages
10100 NNTPControlMessageAssistantHeader
10101 NNTPControlMessageHeader
10150 Newsfeed Configuration Wizard
10157 Enter the &name of NNTP folder to create:
10158 New Folder
10160 15 minutes
10161 1 hour
10162 3 hours
10163 6 hours
10164 12 hours
10165 24 hours
10170 %s (%s)
10171 Newsfeed %s
10175 Setting up INS
10176 Initializing parser...
10177 Creating INS service...
10178 Starting INS service...
10179 Initializing...
10180 Loading active list from DS...
10181 Establishing connection to ISP...
10182 Downloading active list from ISP...
10183 Importing active list from file...
10184 Done.
10185 Setting up Active file
10186 Updating newsgroup public folder hierarchy
10187 Examining %s newsgroup public folder hierarchy...
10188 Updating %s newsgroup public folder...
10190 Creating new folders
10191 An error occurred while specifying the newsgroups in this newsfeed.\nPlease choose which newsgroups to include in this newsfeed at a later time.
10192 Your newsfeed is not fully configured.\nYou may need to reconfigure with the Exchange Administrator program for your newsfeed to work correctly.
10193 An error occured while generating a unique directory name for this newsfeed.
10194 An error occured while subscribing.
10195 An error occured while unsubscribing.
10196 An error occured while saving selected newsgroups to file.
10197 An error occured while creating view of selected newsgroups.
10198 Some of the selected newsgroups will be included in other outbound newsfeeds.\nYou may want to reconfigure the other newsfeeds to exclude these newsgroups.
10200 Saving the active list to file
10201 Initializing...
10202 Retrieving the active list from Microsoft Exchange Information Store...
10203 Saving the active list to file...
10205 There is no active list available on %s. File not saved.
10210 Save active list to file
10211 Stopping the Internet News Service...
10212 Removing the Internet News Service...
10220 Could not communicate with the remote host. Verify that you have entered the host information correctly.
10221 Could not import active file. List from provider was empty or contained no valid newsgroups.
10222 Authentication error trying to retrieve active list from provider.
10223 A timeout occured waiting for a response from the provider.
10224 Out of memory.
10225 Found an incompatible version of your active data. Please re-import your active file.
10226 Could not communicate with the Microsoft Exchange Internet News Service. Please verify that the service has been started.
10227 A non-recoverable error occurred while attempting to import the active file.
10228 A non-recoverable error occurred while attempting to initialize the active tree.
10229 An error occurred while attempting to import the active file. The active file (%s) was not found.
10230 An error occurred while attempting to determine the list of changes for your newsfeed. Your changes have not been saved.
10231 A nonrecoverable error occurred while attempting to update the newsfeed info on the newsgroup public folders. Some changes may have been lost.
10232 Could not add newgroup. The moderator.txt file was not found.
10233 An error occurred while updating public folders.
10234 An error occurred while trying to create public folders.
10235 Unable to create newsgroup folder. Folder already exists.
10236 Unable to create newsgroup folder. Folder specified is either incomplete or invalid.
10237 Unable to remove newsgroup folder. Folder specified doesn't exist.
10238 Unable to remove newsgroup folder. Folder specified isn't a newsgroup.
10239 Unable to process message. Control message doesn't contain a Control header line.
10240 Unable to process message. Control message doesn't contain an Approved header line.
10241 Unable to process message. The newsgroup folder name either contain invalid characters or is too long.
10242 Unable to process message. No newsgroup name exists in the control message.
12051 Post Office
12052 Path to cc:Mail post office
12053 Administrator's Mailbox
12054 Address Space
12055 cc:Mail
12056 Address
12057 Queues
12058 Import Container
12059 &Import to
12060 Import to:
12061 Import filters
12062 A process has been started to synchronize the directories.
12063 Are you sure you want to remove the filter item?
12064 Dirsync Schedule
12099 The '%s' field points to an invalid path. You must enter the \\computername\sharename followed by the path.
12100 The '%s' field points to an invalid path. You must enter a valid path to a cc:Mail postoffice.
12101 The account previously chosen for the Administrator's Mailbox is no longer valid. You must choose a new account.
12102 The container previously chosen for the import container is no longer valid. You must choose a new import container.
12103 The filter item %s already exists.
12104 The '%s' field requires a valid mailbox. You must select a valid mailbox.
12105 The Microsoft Exchange Connector for Lotus cc:Mail service must be restarted for your changes to take effect. Stop and start the service using the Services icon in the Windows NT Control Panel.
12106 You have selected import filtering, but no address formats are specified.
12107 MSExchangeCCMC
12110 \CLANDATA
12111 \ccpombox.*
12112 Chinese (Simplified)
12113 Chinese (Traditional)
12114 Czech
12115 Danish
12116 Finnish
12117 Greek
12118 Hungarian
12119 Japanese
12121 English (United States)
12122 French
12123 German
12124 Norwegian
12125 Polish
12126 Russian
12127 Spanish
12128 Swedish
12129 Turkish
12130 English (United Kingdom)
13100 Access Point
13101 NT Security Descriptor
13102 NT Security Identifier
13103 Replica Link
13104 Schedule
13105 Text
13106 Universal Time Code
13107 X.400 Address
13108 File Version
17100 netui2.dll
17101 Unknown Account
17102 Deleted Account
17103 Send As
17104 User
17105 Admin.
17106 Permissions Admin.
17107 View Only Admin.
17108 Service Account Admin.
17109 Search
17110 %s\%s
17111 No Windows NT domains found. You will only be able to select Windows NT accounts defined on this computer.\nThis means that future administration of this object will be possible only from this computer.\nAre you sure to want to set up permissions like this?
17112 At least one account must have administrator privileges
17113 At least one account must have permissions privileges
17114 %s%s%s
17115 Custom
17116 You have not given any accounts User permission on this mailbox. Without such permission, a user cannot log on to the mailbox. You can use the permissions tab in order to grant access. Would you like to continue?
17117 The account %s has been granted the following right(s):%s.
17118 Log on as a service
17119 Restore files and directories
17120 Act as part of the operating system
17121 samlib.dll
17122 You have not chosen a Primary Windows NT account for this mailbox. Would you like the NT account '%s\%s' to be this account?
17123 You have not given any accounts User permission on this mailbox. Would you like to create an NT account '%s' which will be given this permission?
17124 dapi.dll
17125 &Add
17126 Linkage
17127 Export
17128 EDB
17130 Custom Attribute %d
17131 Extension-Attribute-%d
17132 You must connect to a server in the recipient's remote site to view the custom recipient attribute names.
17133 Custom Attribute %d
17140 Custom Attribute 1
17141 Custom Attribute 2
17142 Custom Attribute 3
17143 Custom Attribute 4
17144 Custom Attribute 5
17145 Custom Attribute 6
17146 Custom Attribute 7
17147 Custom Attribute 8
17148 Custom Attribute 9
17149 Custom Attribute 10
17150 You do not have the rights to perform the requested security operation.
17151 The account specified does not have the rights specified.
17152 Generic Security Error
17153 The account does not have the right requested.
17154 The error %#08lX occurred when trying to detect if the specified account has Log On As A Service rights on this machine. Make sure that this account has this right before continuing.
17155 The error %#08lX occurred when trying to detect if the account '%s' is part of the Administrators group on this machine. Make sure that this account is part of this group before continuing.
17156 The error %#081X occurred when trying to create a Windows NT account
17158 The Windows NT Account already exists.
17159 Failed to contact Windows NT Domain Controller.
17160 You are assigning permissions to the local group %s. Local groups can only be used in the domain where they are created, so members of this group will not be able to administer this resource from other domains.
17190 Selection was too large. Not all of the requested items have been selected.
17191 Selection was canceled by user.
17192 Timeout occurred while trying to complete selection.
17193 The item is no longer available.
17200 TNEF
17201 <None>
17202 Message Store
17203 Delivery Queue
17204 Retrieval Queue
17205 Take no action
17206 Restart the service
17207 Restart the computer
17208 Microsoft Mail 3.2
17209 Microsoft Exchange
17210 Not Urgent
17211 Normal
17212 Urgent
17250 The value for '%s' is not valid. Specify a value from %d through %d.
17260 You must provide a value for the '%s' field.
17261 Do not use the forward slash character (/) in the '%s' field.
17262 The field '%s' is numeric. The value you entered is either not a number or is too large.
17263 Enter an even number of hexadecimal digits in the '%s' field.
17264 The field %s contains an embedded null character. Data loss will occur if this value is translated to text.\n\nDo you want to continue?
17265 The Header Info Version Number is not current.
17266 The selection could not be restored.
17270 '%s' is not a valid IP address. Enter an address in the form #.#.#.#, where # represents a number from 0 through 255.
17271 '%s' is not a valid Host name. Host name can not start with a digit.
17300 ImagePath
17301 MSExchangeMTA
17302 MSExchangeIS
17303 MSExchangeSA
17304 MSExchangeDX
17306 MSExchangePCMTA
17307 MSExchangeIMT
17308 MSExchangeIMC
17309 MSExchangeCCMC
17310 MSExchangeFB
17311 MSExchangeDS
17312 MSExchangeES
17313 MSExchangeKMS
17314 MSExchangeINS
17315 w3svc
17316 MSExchangeWEB
17317 MSFTPSVC
17318 GopherSvc
17319 objectname
17320 Internal1
17321 Internal2
17322 Microsoft Exchange Directory
17323 Microsoft Exchange Event Service
17324 Microsoft Exchange Key Management Server
17325 Microsoft Exchange Message Transfer Agent
17326 Microsoft Exchange Information Store
17327 Microsoft Exchange System Attendant
17328 Microsoft Exchange Directory Synchronization
17329 MS Mail Connector Interchange
17330 MS Mail Connector (PC) MTA
17331 Microsoft Exchange Internet Mail Transport
17332 Microsoft Exchange Internet Mail Service
17333 Microsoft Exchange Connector for Lotus cc:Mail
17334 MS Schedule+ Free/Busy Connector
17335 Microsoft Exchange Internet News Service
17336 World Wide Web Publishing Service
17340 ClusSvc
17350 Normal
17351 Admin Privilege
17352 Spooler
17353 Dos Client
17354 In Sync
17355 Remote Modified
17356 Local Modified
17357 Both Modified
17358 Below Limit
17359 Issue Warning
17360 Prohibit Send
17361 No Checking
17362 Not Available
17363 Mailbox Disabled
17370 You must choose a Recipients container.
17380 NNTP - %s
17381 NNTP - %s\%s
17400 Either the MIME or UUENCODE option must be selected.
17401 At least one MIME option must be selected.
17409 ANSI
17410 BIG5
17411 DIN_66003
17412 GB2312
17413 ISO-2022-JPDBCS
17414 ISO-2022-JPESC
17415 ISO-2022-JPSIO
17416 ISO-2022-KR
17417 ISO-8859-1
17418 ISO-8859-2
17419 ISO-8859-3
17420 ISO-8859-4
17421 ISO-8859-5
17422 ISO-8859-6
17423 ISO-8859-7
17424 ISO-8859-8
17425 ISO-8859-9
17426 KOI8-R
17427 NS_4551-1
17428 SEN_850200_B
17429 SHIFT-JIS
17430 US-ASCII
17431 EUC-KR
17432 WINDOWS-1250
17433 WINDOWS-1251
17434 WINDOWS-1252
17435 WINDOWS-1253
17436 WINDOWS-1254
17437 WINDOWS-1255
17438 WINDOWS-1256
17439 WINDOWS-1257
17440 X-EUC
17441 WINDOWS-874
17442 utf-7
17443 utf-8
17459 Untranslated ("ANSI")
17460 Chinese Traditional (Big5)
17461 IA5 (German)
17462 Chinese Simplified (GB2312)
17463 Japanese (JIS)
17464 Japanese (JIS-ESC)
17465 Japanese (JIS-SIO)
17466 Korean (KSC5601)
17467 Western European (ISO-8859-1)
17468 Central European (ISO-8859-2)
17469 Turkish (ISO-8859-3)
17470 Baltic (ISO-8859-4)
17471 Cyrillic (ISO-8859-5)
17472 Arabic (ISO-8859-6)
17473 Greek (ISO-8859-7)
17474 Hebrew (ISO-8859-8)
17475 Turkish (ISO-8859-9)
17476 Russian (KOI8-R)
17477 IA5 (Norwegian)
17478 IA5 (Swedish)
17479 Japanese (Shift-JIS)
17480 US ASCII
17481 Korean (Windows 949)
17482 Central European (Windows 1250)
17483 Cyrillic (Windows 1251)
17484 Latin I (Windows 1252)
17485 Greek (Windows 1253)
17486 Turkish (Windows 1254)
17487 Hebrew (Windows 1255)
17488 Arabic (Windows 1256)
17489 Baltic (Windows 1257)
17490 Japanese (EUC)
17491 Thai (Windows 874)
17492 Unicode (UTF-7)
17493 Unicode (UTF-8)
17520 ,
17521 <Tab>
17522 <Space>
17523 "
17524 '
17525 %
17526 !
17527 @
17528 &
17529 *
17530 ^
17531 #
17532 $
17533 ;
20000 ViewDocSetting
20001 HomeServer
20002 MonitorName
20003 HlistSelection
20004 SplitterPosition
20005 PaneView
20006 Servers
20130 Parameters
20131 X.400 Service Event Log
20140 Windows NT log severity (Configuration)
20141 Windows NT log severity (Directory Access)
20142 Windows NT log severity (Field Engineering)
20143 Windows NT log severity (Interface)
20144 Windows NT log severity (Internal Processing)
20145 Windows NT log severity (Operating System)
20146 Windows NT log severity (Operator event)
20147 Windows NT log severity (Resource)
20148 Windows NT log severity (Security)
20149 Windows NT log severity (X.400 Service)
20150 RAM log severity (Configuration)
20151 RAM log severity (Directory Access)
20152 RAM log severity (Field Engineering)
20153 RAM log severity (Interface)
20154 RAM log severity (Internal Processing)
20155 RAM log severity (Operating System)
20156 RAM log severity (Operator event)
20157 RAM log severity (Resource)
20158 RAM log severity (Security)
20159 RAM log severity (X.400 Service)
20160 Log file severity (Configuration)
20161 Log file severity (Directory Access)
20162 Log file severity (Field Engineering)
20163 Log file severity (Interface)
20164 Log file severity (Internal Processing)
20165 Log file severity (Operating System)
20166 Log file severity (Operator event)
20167 Log file severity (Resource)
20168 Log file severity (Security)
20169 Log file severity (X.400 Service)
20180 MainXDSHeader
20181 MainMapiHeader
20182 FindHeader
20183 LinkMonitorHeader
20184 ServerMonitorHeader
20185 MdbConnectionsHeader
20186 MdbPrivateLogonHeader
20187 MdbResourceHeader
20188 MdbPFResourceHeader
20189 MdbAgeLimitsHeader
20190 MdbReplStatusHeader
20191 MdbReplFoldersHeader
20192 PfReplFoldersHeader
20194 SiteAddrRoutingHeader
20195 MdbPublicLogonHeader
20196 ConnectionFilterHeader
20197 MainSVCHeader
20198 MIMETypeHeader
20199 LDAPProtReferralsHeader
20200 MainMdbResourceHeader
20201 MainMdbPFResourceHeader
20202 MainMdbReplFoldersHeader
20203 MainMdbConnectionsHeader
20204 MainMdbLogonsHeader
20205 MainPMdbLogonseader
20206 ToolBar
20207 SavedToolbar
20208 LogLinkMonitorTotalTime
20209 GWQueuesReplStatusHeader
20215 ImportFile
20216 ExportFile
20220 ParametersPublic
20221 ParametersPrivate
20222 ParametersSystem
20223 DB Path
20225 DB Log Path
20226 Working Directory
20227 PRIV
20228 EDB
20229 PUB
20230 EDB
20233 *
20234 LOG
20235 *
20236 *
20237 Circular Logging
20250 Parameters
20251 DSA Database file
20252 Database log files path
20254 DSA Working Directory
20255 DIR
20256 EDB
20257 *
20258 LOG
20259 *
20260 *
20261 Circular Logging
20265 Parameters
20266 MTA Run Directory
20270 Assoc-NT-Account
20271 NT-Security-Descriptor
20272 File-Version
20280 CleanMailboxFolder
20290 RAS (%s)
20291 TCP (%s)
20292 TP4 (%s)
20293 Eicon X.25 (%s)
20294 Site Connector (%s)
20295 Directory Replication Connector (%s)
20296 X.400 Connector %s
20297 Dynamic RAS Connector %s
20330 local
21000 Connects to a server
21001 Creates a new mailbox for a Microsoft Exchange user
21002 Creates a group of recipients
21003 Creates a recipient outside the site
21004 Saves the contents of the listbox to a file.
21005 Displays the properties of the selected object
21006 Displays the raw properties of the selected object
21007 Duplicates the selected object
21021 Creates a new monitor of Microsoft Exchange servers
21022 Creates a new monitor of a link between Microsoft Exchange servers or foreign systems
21023 Creates a new recipients container
21024 Creates a new MTA transport stack
21025 Creates a new connection over X.400
21026 Creates a new connection over a remote access service link
21027 Creates a new connection to a Microsoft Exchange site
21028 Creates a new directory replication connection between Microsoft Exchange sites
21029 Creates a new dirsync requestor to Microsoft Mail
21030 Creates a new dirsync server for Microsoft Mail
21031 Creates a new remote dirsync requestor
21032 Creates a new information store
21033 Creates a new raw object
21034 Creates a new NNTP newsfeed object
21035 Creates a new internet mail service
21036 Creates a new Address Book View
21037 Creates a new Address Book View container
21050 Displays the mailboxes in the selected container
21051 Displays the distribution lists in the selected container
21052 Displays the custom recipients in the selected container
21053 Displays the public folders in the selected container
21054 Displays all recipients in the selected container
21056 Moves the split bar
21057 Selects a font for list boxes
21058 Displays the hidden recipients in the selected container
21059 Displays the raw directory
21060 Modifies the columns that are displayed
21061 Shows or hides the toolbar
21070 Sorts the list by selection
21071 Sorts the list by display name
21073 Sorts the list by last modified date
21101 Imports directory information from a file
21102 Exports directory information to a file
21103 Starts the selected monitor
21104 Tracks a message
21105 Generates a list of Windows NT users used for directory import
21106 Generates a list of NetWare users used for directory import
21107 Moves users from one server to another
21108 Deletes messages from the selected user's private storage
21109 Administers public folder forms
21110 Creates newsgroup hierarchies from public folders
21111 Finds recipients in the organization
21112 Sets default options on user creation and permissions
21113 Selects and arranges toolbar buttons
21114 Updates selected recipient(s) to appear in the chosen Address Book View
21151 Shows the Global Address List
21152 Shows the Public Folders
21153 Shows the Site Container
21154 Shows the Configuration Container
21155 Shows the Servers Container
21156 Shows the Monitors Container
21157 Shows the Connectors Container
21158 Shows the Replication Container
21159 Shows the Protocols Container
21160 Shows the Recipients Container
21161 Shows the Address Book Views
21170 Shows/Hides the Container View
21171 Goes up one level in the container view
21500 Address Space
21501 Activation Schedule
21502 Connected Sites
21503 Settings
21504 Routing Address
21505 Restrictions
21510 Routing Calculation Schedule
21511 Site Addressing
21512 Offline Address Book Schedule
21513 Offline Address Book
21514 Top Level Folder Creation
21515 Storage Warnings
21516 Public Folder Affinity
21517 Messaging Defaults
21518 Routing
21519 Attributes
21520 Import Container
21521 Export Containers
21522 Schedule
21523 Exchange Parameters
21525 Queues
21530 Stack
21531 Override
21532 RAS Override
21533 MTA Override
21534 Connectors
21540 Target Servers
21545 Addressing
21546 Sites
21551 Recipients
21560 Services
21561 Locales
21562 IS Maintenance
21563 Database Paths
21570 Incoming Templates
21571 Outgoing Templates
21580 Logging
21581 Queues
21582 Columns
21590 Connections
21591 Logons
21592 Mailbox Resources
21593 Instances
21594 Replication Schedule
21595 Age Limits
21596 Logons
21597 Public Folder Resources
21598 Replicas
21599 Server Replication Status
21600 Folder Replication Status
21601 NNTP
21630 Connections
21631 MIME Types
21635 Group By
21636 Advanced
21640 Authentication
21641 Message Format
21642 Idle Time-out
21643 Anonymous
21650 Service Account Password
21661 Search
21662 Referrals
21663 Secure
21664 Port
21665 Server Name
21666 Directory Name
21667 You must specify the directory name.
21668 The server name must exist and cannot contain spaces.
21669 This referral is a duplicate of an existing referral and can't be entered in the list. Make the referral unique or cancel.
21700 Messages
21701 Connection
21702 Security
21704 Hosts
21705 Distributions
21706 Inbound
21707 Outbound
21708 Newsgroup Hierarchies
21709 Add Newsgroup Hierarchy
21711 Create Newsgroup Folders
22030 Server %s in %s - %s
22031 Recipient
22032 %d %s
22033 New Address Space
22034 Anonymous Access Account
22035 Owner of the Distribution List
22036 Dead Letter Recipient
22040 Do you really want to clear all the times in the grid?
22041 %s cannot be created in the selected parent container.\nDo you want to switch to the '%s' container of site '%s'?
22042 Recipients containers cannot be created in selected container.\n\nDo you want to switch to site '%s'?
22043 Deleting...
22045 The specified object does not currently exist in the directory.\n\nAre you sure you want to reference this object?
22046 At least one of the following columns is required for sorting:
22047 Refreshing...
22048 The DS/IS consistency adjuster will take ownership and change permissions on all public folders from unknown sites; the implications should be fully understood before continuing this operation. Choose Help for a more detailed explanation.
22061 &Sites
22062 &Servers
22063 &Public folders
22064 R&ecipients
22065 R&uns on
22066 Replicate &folders to
22067 &Folders on this Information Store
22068 All&owed to create top level folders
22069 No&t allowed to create top level folders
22070 All&owed to create forms folders
22071 No&t allowed to create forms folders
22077 An address must be specified on the Routing Address property page.
22078 Routing Address
22081 Connected site c&ost:
22082 Target server c&ost:
22083 &Public folder affinity:
22084 &Installed locales:
22085 &Selected locales:
22086 SYSTEM\CurrentControlSet\Control\Nls
22087 Language
22088 The site '%s' in the organization '%s' already exists in the list of connected sites. Specify another site or organization.
22089 Are you sure you want to delete the selected connected site?
22090 The X.400 address is not valid. The administrative management domain name (ADMD) and the country must be specified.
22091 The local site cannot be added to the list of connected sites. Specify another site.
22092 The connected site cannot be removed because this connector is the only connector providing mail connectivity from the local site to the replicated site '%s'.
22100 Password validation failed.
22101 You must enter values for all required fields on the %s property page.
22102 The Windows NT Registry on the remote system could not be accessed. Try again later.
22103 The value for '%s' is not valid. Specify a value from 1 through 2,097,151.
22104 You must specify at least one address space on the Address Space property page or at least one site on the Connected Sites property page before this connector can be created.
22105 At least one address must be specified in the Address Space. Use the Address Space property page to add an address.
22106 You must provide a .DLL filename for the e-mail address generator.
22107 After changing the locales supported on this server, be sure the appropriate Windows NT code pages are installed and restart the Microsoft Exchange Server services.
22108 You must select at least one locale.
22109 You must provide a .DLL filename for the extension.
22110 Unable to initialize newsgroups. Verify that the Microsoft Exchange Information Store and Microsoft Exchange Internet News Service services are started.
22111 Failed to contact server. Verify that the Microsoft Exchange services are started on the machine.
22115 You cannot create a subcontainer.\nThe selected container does not define a subcontainers grouping attribute.
22116 Some of the selected objects are in a different site, and could not be modified to add them to the destination address book view container. Connect to a server in the other site and try again.
22120 Specify a value from %d through %d.
22121 Specify a value that contains a minimum of %d characters and a maximum of %d characters.
22122 Specify a value that contains an even number of hexadecimal digits.
22123 Specify a value in the form YYMMDDHHMMSSZ or YYMMDDHHMMSS▒HHMM.
22124 A value from %d through %d must be specified for '%s'.
22130 The replication process failed, probably due to lack of memory
22131 A custom address could not be created
22140 A list of sites could not be created
22141 A list of e-mail addresses could not be created
22150 A connection could not be made to the Microsoft Exchange Server directory on server '%s'
22151 The Windows NT Registry on the Microsoft Exchange Server computer '%s' could not be accessed
22152 The Windows NT Registry on the Microsoft Exchange Server computer '%s' could not be modified
22153 The Windows NT Registry key at '%s' on the Microsoft Exchange Server computer '%s' could not be read
22154 The Windows NT Registry key at '%s' on the Microsoft Exchange Server computer '%s' could not be modified
22155 The Directory Replication Connector could not be created because there is no Private Information Store on server '%s'. Either select a different local bridgehead server, or create a Private Information Store on server '%s'
22200 The promotional version of Microsoft Exchange server on %s will expire on %s.
22201 The promotional version of Microsoft Exchange server on %s has expired. Users on this server will no longer be able to send or receive messages.
22900 Display Name
22901 Alias Name
22902 Modified
22903 Created
22904 Server
22905 Last Measurement
22906 Last Change
22907 Comment
22908 First Name
22909 Initials
22910 Last Name
22911 Address
22912 City
22913 State
22914 Zip Code
22915 Country
22916 Title
22917 Company
22918 Department
22919 Office
22920 Assistant
22921 Business Phone
22922 Business Phone 2
22923 Fax Phone
22924 Assistant Phone
22925 Home Phone
22926 Home Phone 2
22927 Cellular Phone
22928 Pager Phone
22929 Notes
22940 Home Server
22941 Expansion Server
22943 Target Address
22944 Last Time
22945 Directory Name
22946 Administrative Note
22947 E-mail Addresses
22948 E-mail Address (Microsoft Mail)
22949 E-mail Address (Internet)
22950 E-mail Address (X.400)
22951 E-mail Address (FAX)
22952 E-mail Address (cc:Mail)
22953 E-mail Address (Profs)
22954 E-mail Address (Snads)
22955 E-mail Address (MHS)
22956 E-mail Address (Notes)
22957 Location
22958 Server Version
22959 Public Folder
22960 Newsgroup name
23000 Collecting list of mailboxes and connectors...
23001 Collecting list of public folders...
23002 Collecting list of directory synchronization requestors/server...
23003 Collecting list of X.400 connectors...
23004 Collecting list of directory replication connectors...
23016 You cannot delete an Address Book View container that contains recipients.
23017 You cannot delete an Address Book View container that has subcontainers.
23018 Collecting list of NNTP newsfeeds...
23019 Deleting NNTP newsfeeds...
23020 Deleting a server will remove the server from the site.\n\nAre you sure you want to delete the server?
23022 Deleting the directory synchronization server will result in the loss of directory synchronization information.\n\nAre you sure you want to delete the directory synchronization server?
23023 Deleting a directory replication connector will stop replication between the connected site and the local site.\n\nAre you sure you want to delete the connector?
23024 Deleting %d directory replication connectors will stop replication between the local site and the connected sites represented by those connectors.\n\nAre you sure you want to delete the directory replication connectors?
23025 Deleting %d servers will remove those servers from the site.\n\nAre you sure you want to delete the servers?
23026 Deleting %d containers will delete all objects in those containers.\n\nAre you sure you want to delete the containers?
23027 Should the directory replication connector in the remote site '%s' be deleted also?
23028 Examining Address Book View Container %s
23030 All mailboxes on this server and their contents will be deleted when you delete this server. You can use the Move Mailbox command on the Tools menu to move the mailboxes to a different server.\n\nAre you sure you want to delete the server '%s' without first moving the mailboxes?
23031 There are %d mailboxes and gateways on this server. All these gateways will be deleted. All mailboxes and their contents will also be deleted. You can use the Move Mailbox command on the Tools menu to move the mailboxes to a different server.\n\nAre you sure you want to delete server '%s' without first moving the mailboxes?
23032 The contents of all public folder instances on this server will be deleted.\n\nAre you sure you want to delete server '%s'?
23033 There are %d X.400 connectors on this server, and they will be deleted. You can use the Properties command on the File menu to move these connectors to another server.\n\nAre you sure you want to delete server '%s' without first moving these connectors?
23034 The server you are deleting is the dirsync server. You can use the Properties command on the File menu to select a different server to be the directory synchronization server.\n\nAre you sure you want to delete server '%s' without first selecting a different server to be the dirsync server?
23035 There are %d dirsync requestors on this server, and they will be deleted. You can use the Properties command on the File menu to move these directory synchronization requestors to another server.\n\nAre you sure you want to delete server '%s' without first moving the dirsync requestors?
23036 There are %d directory replication connectors for whom this server is the bridgehead server. You can use the Properties command on the File menu to select a different server to be the bridgehead server.\n\nAre you sure you want to delete server '%s' without first selecting a different server to be the bridgehead server?
23037 Deleting the directory replication connector that connects with site '%s' will stop replication with that site. To re-establish replication with that site, you must add a new directory replication connector.\n\nAre you sure you want to delete the directory replication connector?
23038 All recipients in the container '%s' will be deleted along with the container.\n\nAre you sure you want to delete the container?
23040 All X.400 connectors supported by this MTA transport stack will be deleted along with the stack.\n\nAre you sure you want to delete the stack?
23041 All custom recipients imported by the '%s' dirsync requestor will be deleted along with the requestor.\n\nAre you sure you want to delete the dirsync requestor?
23042 There are %d newsfeeds on this server, and they will be deleted.\n\nAre you sure you want to delete server '%s'?
23045 %d Address Book View containers to be processed.
23046 Preparing Address Book View containers for processing...
23051 The local server '%s' cannot be deleted.
23052 The standard container '%s' cannot be deleted.
23053 The recipients container '%s' contains public folders or other recipients containers, or both. Therefore, it cannot be deleted.
23055 The remote dirsync requestor '%s' cannot be deleted.
23056 The dirsync requestor '%s' cannot be deleted.
23057 The dirsync server '%s' cannot be deleted because there are remote dirsync requestors defined. Delete the remote dirsync requestors, and then try again.
23060 The server '%s' has been deleted.
23070 %s is a permanent object and cannot be deleted.
23080 You cannot delete the Microsoft Exchange Server computer '%s' because it is still active. Shut the server down, and then try again.
23090 The server could not be deleted because some mailboxes and connectors were not successfully deleted.
23091 The server could not be deleted because some public folders were not successfully moved to a different server.
23092 The server could not be deleted because one or more X.400 connectors were not successfully deleted
23093 The server could not be deleted because some directory synchronization requestors or servers were not successfully deleted.
23094 The server could not be deleted because one or more directory replication connectors were not successfully deleted
23095 The server could not be deleted because one or more server objects were not successfully deleted.
23096 The server could not be deleted because one or more NNTP newsfeeds were not successfully deleted
23100 The Site Addresses of type(s) [%s] have been modified.\nDo you want to update all Recipient E-mail addresses to match the new site address(es)?
23101 A process has been started to update the Recipient E-mail Addresses.
23102 Recipient E-mail Address Removal
23103 Enter the e-mail address type to delete from all recipient objects:
23104 WARNING: You are about to remove every primary and secondary e-mail address of type '%s' on all recipients throughout the site. Are you sure you want to remove these e-mail addresses?
23105 A process has been started to remove the '%s' recipient e-mail addresses.
23106 The X400 e-mail address type is required for all recipient objects and may not be removed.
23107 Address generation for [%s] has been enabled for all newly created Recipients.\nDo you want to automatically add this Address Type to all existing Recipients E-mail addresses?
23108 Address generation for [%s] has been disabled for all newly created Recipients.\nDo you want to automatically remove this Address Type from all existing Recipients E-mail addresses?
23120 The site address for Microsoft Mail addresses can be modified only using the Local Postoffice property page for the MS Mail Connector object.
23121 The tombstone lifetime must be at least two days and the garbage collection interval must be greater than zero hours. The tombstone lifetime, when expressed in hours, must also be at least three times the garbage collection interval.
23122 The X.400 site address cannot be disabled. All recipients must have an X.400 address in Microsoft Exchange.
23123 The SMTP site address cannot be disabled. All recipients must have an SMTP address in Microsoft Exchange.
23124 You need to be connected to a server running Microsoft Exchange Server version 5.0 or later to enable and disable address types.
23130 The server has been deleted. However, the routing calculation server could not be adjusted. Use the General property page on the site object to change the routing calculation server to an existing server in the site
23140 Values must be provided for custom attribute names.
23141 Custom attribute names cannot contain the ampersand (&) character.
23142 This extension attribute field value matches an existing value. The value for each extension field must be unique.
23143 Control X, Y, Width, and Height dimensions must be from 0 through %d.
23144 The field length for this control must be from %d through %d.
23145 The first control in the template must be a page break.
23147 Generation of offline Address Book completed successfully.
23148 All changes made to this site object will be saved before the offline Address Book is generated.
23149 Changes to the site object could not be saved. The offline Address Book was not generated.
23150 Saving changes to the offline Address Book server...
23151 Generating offline Address Book...
23152 The offline Address Book server is not specified.
23153 Offline Address Book Generation
23154 The container '%s' no longer exists. The container from which the offline Address Book is generated has been set to the default value.
23156 Anonymous requests
23157 Authenticated requests
23158 System attributes
23159 Inter-site replication
23160 All mail recipients
23161 Mailbox
23162 Remote Address
23163 Public Folder
23164 Distribution List
23165 Check the attributes which will be available to anonymous LDAP directory requests.
23166 Check the attributes which will be available to authenticated LDAP directory requests.
23167 Check the atributes which will be marked as system attributes.
23168 Check the attributes which will be replicated between sites.
23169 You have not enabled any authentication mechanisms for this protocol. Choose OK to continue, or Cancel to reconfigure authentication.
23170 A&vailable columns:
23171 &Selected columns:
23180 You must specify at least one column name.
23190 Type
23191 Value
23192 Cost
23193 Connector
23200 RAS MTA Transport Stack
23201 TCP/IP MTA Transport Stack
23202 TP4 MTA Transport Stack
23203 Eicon X.25 MTA Transport Stack
23204 Dynamic RAS Connector
23205 TCP/IP X.400 Connector
23206 TP4 X.400 Connector
23207 Eicon X.25 X.400 Connector
23208 RAS (%s)
23209 TCP (%s)
23210 TP4 (%s)
23211 Eicon X.25 (%s)
23212 R&emote Initiated
23220 1984 X.400 and 1988 X.410 modes do not support the use of P selectors. Therefore, the P selector values showing on the Stack property page will be cleared.\n\nAre you sure you want to continue?
23221 The bodypart to use for message text has been set to a non-standard IA5 type. Be sure 'Convert incoming messages to internal Exchange contents' is checked on the Message Transfer Agent General property page for server '%s'.
23222 You have changed the I/O Port type to Async phone line. After making this change, you must modify all connectors associated with this MTA transport stack so that a phone number is specified on the Stack page.\n\nAre you sure you want to do this?
23223 You must configure both sides of this connection before messages can be sent successfully. If you are connecting to another Microsoft Exchange site then ensure that a properly configured connector exists in that site.
23230 This MTA local name is already being used by another server in the organization. Provide a unique MTA local name.
23240 To use this feature, the Administrator program must be running on the Microsoft Exchange Server computer that has the RAS MTA transport stack installed.
23241 Remote Access Service (RAS) does not appear to be installed on this server. Before a RAS MTA transport stack can be installed, RAS network software must be installed and configured on the Microsoft Exchange Server computer you will use for RAS message transport.
23242 TCP/IP does not appear to be installed on this server. Before the TCP/IP MTA transport stack can be installed, TCP/IP network software must be installed and configured on the Microsoft Exchange Server computer you will use for TCP/IP message transport.
23243 TP4 does not appear to be installed on this server. Before a TP4 MTA transport stack can be installed, TP4 network software and hardware must be installed and configured on the Microsoft Exchange Server computer you will use for TP4 message transport.
23244 Eicon X.25 software does not appear to be installed on this server. Before an Eicon X.25 MTA transport stack can be installed, X.25 network software and host adapter must be installed and configured on the Microsoft Exchange Server computer you will use for X.25 message transport.
23246 The entry '%s' could not be found in the Remote Access Service (RAS) Phone Book. Choose OK to accept this entry, or choose Cancel to type a new entry.
23247 You must select an MTA transport stack type.
23248 You must select an X.400 connector type.
23249 Before you can configure an X.400 connector, you must use the New Other MTA Transport Stack command on the File menu to install an MTA transport stack.
23250 The values for Password and Confirm Password must be identical. Type the same password in both text boxes.
23251 The MTA transport stack '%s' could not be found in the directory. Be sure the selected MTA transport stack exists in the directory.
23252 An address is required. Use the %s property page to specify the address.
23253 You must use the %s property page to specify a network service access point (NSAP) address. For information about the specific format and length of the NSAP address for a foreign X.400 system, see the system documentation for that system.
23254 You must specify an X.121 address on the %s property page.
23255 You must select an X.400 bodypart for the message text.
23256 A RAS MTA transport stack is already installed on this target server. Select another target server, or select a different transport type for the selected target server.
23257 A TCP/IP MTA transport stack is already installed on this target server. Select another target server, or select a different transport type for the selected target server.
23258 A TP4 MTA transport stack is already installed on this target server. Select another target server, or select a different transport type for the selected target server.
23259 Specify an X.25 remote phone number on the %s property page.
23260 The value for '%s' is not valid. Type a value from 0 through 999.
23261 An error occurred while searching for RAS MTA transport stacks.
23262 You must install a RAS MTA transport stack before a dynamic RAS connector can be configured. To install an MTA transport stack, choose New Other MTA Transport Stack from the File menu.
23263 The field '%s' must not contain the same value as any other Eicon X.25 MTA transport stack in the organization. Provide a unique value.
23264 The field '%s' must not contain the same value as any other Eicon X.25 MTA transport stack on the same server. Provide a unique value.
23265 To delete this connector you must run Microsoft Exchange Server Setup and choose the Add/Remove Component option.
23266 Override account information is required. Specify an account that has Send As and Mailbox Owner permissions (User role) on the Servers or Configuration containers in the remote site, or specify the remote site service account.
23280 An error occurred while trying to run RASPHONE.EXE for using the Remote Access Service (RAS) Phone Book
23281 The specified entry could not be selected from the Remote Access Service (RAS) Phone Book list
23282 The server could not be read from the list box
23283 The MTA transport stack could not be verified.
23284 An error occurred while checking the Windows NT Registry to verify that Remote Access Service (RAS) is installed on the server you selected
23285 An error occurred while checking the Windows NT Registry to verify that TCP/IP is installed on the server you selected
23286 An error occurred while checking the Windows NT Registry to verify that TP4 is installed on the server you selected
23287 An error occurred while checking the Windows NT Registry to verify that X.25 is installed on the server you selected
23290 IA5
23291 IA5 (Swedish)
23292 IA5 (Norwegian)
23293 IA5 (German)
23294 ISO 8859-1 (Latin-1)
23295 ISO 6937
23296 T.61 (TTX)
23297 ISO 8859-2 (Latin-2)
23300 Low
23301 High
23302 Normal
23310 ON
23311 Are you sure you want to delete %d message(s)?
23312 %s on %s
23330 The Administrator program could not connect to server '%s'. Be sure the message transfer agent service is running on '%s'.
23351 The message transfer agent (MTA) is not responding due to a communications error.
23353 The maximum number of administrative connections to the message transfer agent (MTA) has been reached. Try again later.
23354 The connection to the message transfer agent (MTA) has been lost. Try again later.
23355 The queue no longer exists.
23356 The object is not valid.
23357 The priority is not valid.
23358 The object is currently being sent.
23359 The message transfer agent (MTA) could not move the object.
23361 The server name is not valid.
23362 An internal processing error has occurred: memory fault. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
23363 An internal processing error has occurred: bad data type. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
23364 You cannot change the priority of items in a gateway queue.
23365 An internal processing error has occurred: unknown error code. Try restarting the Administrator program or the Microsoft Exchange Server computer, or both.
23450 Clean Mailbox
23451 Deleting items belonging to '%s'
23452 Searching information store belonging to '%s': %d items found.
23453 Opening information store belonging to '%s'
23454 Deleting Folder Associated Items belonging to '%s'
23470 The recipient '%s' is not a mailbox. To delete messages, you must select a mailbox.
23471 You must specify a directory sensitivity level.
23500 Are you sure you want to remove this template control?
23501 You may not edit this type of template control.
23502 You may not remove this type of template control.
23503 %s Template Test
23504 %s Control
23505 Select Control Type
23506 &Choose a control type:
23520 Are you sure you want to overwrite all template controls with the original template?
23521 The original template is not available.
23522 Are you sure you want to remove %d template controls?
23540 One or more selected template controls could not be deleted.
23541 For correct operation of template Help, you must provide a value in the Client Local Help File Name box.
23542 Import a Help file needed for correct operation of template Help.
23550 New Site Connector
23551 Site Connector
23552 Collecting servers in remote site from server '%s'...
23553 Attempting to connect to server '%s'...
23554 Searching for a site connector in site '%s' to site '%s'...
23560 Site Connector (%s)
23561 Enter the name of a server in the target site:
23562 New Site Connector
23570 Should a site connector be created in the remote site '%s'?
23580 You must specify a server that is in the '%s' organization, but not in the '%s' site.
23581 A site connector for the '%s' remote site already exists.
23582 Due to an error while attempting to connect to a server in the remote site, servers on the Target Servers page cannot be added or removed.
23590 An error occurred getting address information from the remote site '%s'
23591 An error occurred preparing to create a site connector in the remote site '%s'
23600 Directory Replication Connector (%s)
23610 This will cause a new copy of every item in the directory to be replicated to this server. This operation may take several hours to complete.
23611 This will cause a new copy of every item for all selected inbound sites to be replicated to the local bridgehead server. This operation may take several hours to complete.
23620 Intersite replication has been configured between '%s' and '%s'. Allow up to one hour for all information to replicate.
23621 Intersite replication has been configured between '%s' and '%s', but you have set up only one side of replication. You must configure intersite replication in site '%s' as well. Once you have completed that configuration, allow up to one hour for all information to replicate.
23622 The directory replication connector has been deleted from both the local site and the remote site. Allow up to an hour for replicated data to be completely deleted.
23623 The directory replication connector has been deleted from the local site, which shuts down intersite replication on one side only. Be sure to delete the connector from the remote site '%s' as well. Once you have deleted the connector in the remote site, allow up to an hour for replicated data to be completely deleted.
23624 Knowledge consistency has been successfully verified
23625 Changing the server designated to be the bridgehead server could cause an interruption in directory change updates sent between the two sites.\n\nAre you sure you want to change a bridgehead server?
23626 Should the new bridgehead server designation be changed in the remote site also?
23627 Completion of the configuration of directory replication has been canceled. To complete the configuration, update the Configuration container and then perform a knowledge consistency check on all servers.
23628 If you plan to reconnect to '%s' in the future, any public folders that are modified or deleted in either site will be replicated to the other site after the sites are reconnected. Additionally, you should not run the DS/IS consistency adjuster because public folder permissions and owners will be changed.\n\n
23629 If you never plan to reconnect to '%s', you should run the DS/IS consistency adjuster to take ownership of all public folders replicated to this site. Run this from the Advanced property page of any server in this site.
23630 If you plan to reconnect '%s' to '%s' in the future, any public folders that are modified or deleted in either site will be replicated to the other site after the sites are reconnected. Additionally, you should not run the DS/IS consistency adjuster in either site because public folder permissions and owners will be changed.\n\n
23631 If you never plan to reconnect these sites, you should run the DS/IS consistency adjuster one time in each site to take ownership of all public folders replicated between sites. Run this from the Advanced property page of any server in each site.
23635 Connecting to bridgehead server '%s'...
23636 Collecting information about which objects to update...
23637 Reading directory replication connector for site '%s' from server '%s'...
23638 Deleting directory replication connector for site '%s' from server '%s'...
23641 The Directory object for bridgehead server '%s' does not have an X.400 e-mail address, which is required for bridgehead servers.
23642 The local bridgehead server '%s' does not have an address of type '%s' to match the remote bridgehead server address. Use the Addressing property page to change the address of the remote bridgehead server.
23644 Specify a server in the '%s' organization.
23645 Specify a server in a site other than the local site '%s'.
23646 Directory information has already been replicated from site '%s'. Specify a server in another site.
23647 '%s' is not a valid address. Specify an address with an address type of '%s'.
23648 '%s' is not a valid address. Specify an address with an address type that is valid for the local site.
23649 You cannot replicate with a site that has the same name as the local site. Enter a different remote site name.
23650 You cannot change the remote bridgehead server until the new server has been replicated in.
23651 The server '%s' is not in the site '%s'.
23652 Mail connectivity must be configured to a new site before a new replication connector can be created. Configure mail connectivity by either creating a site connector or by adding a site to the Connected Sites property page of a connector.
23653 Mail connectivity between the local site and the remote site has not been configured. Configure mail connectivity by either creating a site connector to the local site or by adding the local site to the Connected Sites property page of a connector in the remote site '%s'.
23654 The '%s' cannot be deleted because it is the only connector providing mail connectivity from the local site to the replicated site '%s'.
23655 The Administrator program was unable to confirm that the service account '%s' has the required permissions on the site '%s'. Verify that the service account in the local site '%s' or the account specified on the Override page has Send As and Mailbox Owner permissions (User role) on the Servers or Configuration containers in the remote site '%s'
23656 The Administrator program was unable to confirm that the service account has the required permissions on the site. Verify that the service account in the local site or the account specified on the Override page has Send As and Mailbox Owner permissions (User role) on the Servers or Configuration containers in the remote site
23690 The Directory Replication Connector object could not be initialized.
23700 The site replica '%s' could not be added to server '%s'.
23701 The system attendant on server '%s' could not read the Remote Access Service (RAS) Phone Book entries.
23702 An error occurred while attempting to connect to bridgehead server '%s'.
23703 An error occurred while saving the directory replication connector in site '%s'
23800 Exchange Address:
23801 Foreign Administrator:
23802 Local Administrator:
23803 Import Template:
23810 New Requestor
23811 Directory synchronization server:
23812 <Non MS Mail Dirsync Server>
23813 Requestor:
23814 <Non MS Mail Requestor>
23822 Recipient &containers:
23823 &Export these recipients:
23824 Verbose
23825 Normal
23826 English
23827 French
23828 German
23829 Spanish
23830 Italian
23831 Dutch
23832 Swedish
23833 Portuguese
23834 Danish
23835 Finnish
23836 Norwegian
23837 Japanese
23838 Chinese (Traditional)
23839 Chinese (Simplified)
23840 Czech
23841 Hungarian
23842 Korean
23843 Polish
23844 Russian
23848 Remote Dirsync Requestor
23849 Changing the requestor's address type will require administrator's intervention on the requestor side to perform a complete directory synchronization of addresses.\n\nAre you sure you want to change the requestor's address type?
23850 The Recipients container '%s' no longer exists. Select a new Import container.
23851 You must specify an import container before the requestor can be created.
23852 Changing the server can cause the loss of directory synchronization information. A full export of directory synchronization information will occur on the new server in the next scheduled cycle.
23854 You must select a custom recipient to whom the directory synchronization service will send synchronization mail. Do you want to try again?
23855 You must select a custom recipient or a distribution list for the foreign system administrator. Do you want to try again?
23856 You must select a custom recipient for the import template. Do you want to try again?
23857 Public folders cannot be chosen as a recipient template. Do you want to try again?
23860 This attribute has already been mapped.
23861 A dirsync server already exists in the site '%s'. Only one dirsync server can be created in a site.
23862 A dirsync server must be created in the site '%s' before you can create a remote dirsync requestor. To do this, choose the New Other Dirsync Server command from the File menu.
23863 There are no Microsoft Exchange Server computers available for creating this dirsync requestor.
23864 There are no Microsoft Exchange Server computers available for creating this dirsync server.
23870 Given Name
23871 Surname
23872 Display Name
23873 Title
23874 Company
23875 Department
23876 Office
23877 Assistant
23878 Initials
23880 Office Telephone
23881 Office2 Telephone
23882 Home Telephone
23883 Home2 Telephone
23884 Fax Telephone
23885 Mobile Telephone
23886 Assistant Telephone
23887 Pager Telephone
23888 Address Book Comment
23889 Address
23890 City
23891 State
23892 Country
23893 Zip Code
23894 Simple Display Name
23895 Any Server In Site
23896 A Distribution List cannot be the owner of a Distribution List. Would you like to choose another recipient to be the owner of this Distribution List?
23900 The '%s' field must contain a valid entry.
23901 Specify a Microsoft Exchange Server computer for directory import and export.
23950 Directory Import
23951 Template Recipient for Directory Import
23952 Directory Import File
23953 Directory Export
23954 Directory Export File
23955 Extract Windows NT Account List
23956 Extract NetWare Account List
23957 Save Window Contents
23970 &Import To
23971 &Export From
23972 &Public Folder Container:
23973 Generate From
23974 Directory Import Container
23975 Directory Export Container
23976 Public Folder Container
23977 Offline Address Book Container
23978 Import Container
23979 Find Container
23990 SMTP Queued Outbound
23991 SMTP Outbound Transferred
23992 SMTP Inbound Received
23993 SMTP Inbound Transferred
23994 SMTP Rerouted
23995 SMTP Report Transferred In
23996 SMTP Report Transferred Out
23997 SMTP Report Generated
23998 SMTP Report Absorbed
24000 Select the recipient to identify...
24001 Select the originator of the message...
24002 Message tracking requires access to a Microsoft Exchange Server computer.\nSelect a server for message tracking.
24003 This operation will delete the existing message history.\nDo you want to continue and delete the history?
24004 Select one or more recipients of the message...
24005 Found %d entries in file:\n'%s'
24006 The log file '%s' is not available.\n\nLog files are created each day only if message tracking has been enabled and messages are sent during the specified day.\n\nDo you want to continue the search?
24007 multiple recipients
24010 Message Tracking Center
24011 Trac&k
24012 Pa&use
24013 &Continue
24014 Unknown Event
24015 Error Message
24016 Message Submission
24017 Message Delivery
24018 Message Transfer In
24019 Message Transfer Out
24020 Message Redirection
24021 Distribution List Expansion
24022 Local Message Delivery
24023 Backbone Message Transfer In
24024 Backbone Message Transfer Out
24025 Gateway Message Transfer Out
24026 Report Generation
24027 Report Transfer In
24028 Report Absorption
24029 Report Transfer Out
24030 Report Delivery
24031 Discarding Unroutable Report
24032 Rerouting
24033 Downgrading
24034 Report MTSID:
24035 (Delivered)
24036 (Non-Delivered)
24037 Normal
24038 High
24039 Low
24040 Gateway Message Transfer In
24041 Gateway Report Transfer Out
24042 Gateway Report Transfer In
24043 (Unknown)
24044 Transferred from:
24045 Transferred to:
24051 You are at the end of the log file.
24052 The log file is damaged.
24053 The message tracking log file '%s' has a damaged entry at line %d. Do you want to continue reading the file and attempt to recover the remaining entries?
24054 The log file '%s' is not available.
24055 The recipient '%s' is not found in the directory, and may be a Personal Address Book entry.
24056 The message recipient could not be selected.
24057 The time zone information for your machine cannot be retrieved. Assuming specified search date as Greenwich Mean Time (GMT).
24058 The transfer path of the message cannot be followed because the connector '%s' no longer exists.
24059 The home server attribute cannot be determined for the message originator selected.
24060 The message originator could not be selected.
24061 The search for messages meeting the specified criteria could not be completed.
24062 There are no gateways installed in the site currently binded to.
24063 Previously entered data in the From field will be removed. Do you want to continue?
24064 Previously entered data in the Sent To field will be removed. Do you want to continue?
24065 The log file '%s' is not available.\n\nLog files are created each day only if message tracking has been enabled and messages are sent during the specified day.
24067 Message deleted by Administrator
24068 Probe deleted by Administrator
24069 Report deleted by Administrator
24070 %s Unknown event with %s: X.400 event no. %d
24071 %s Tracked message history on server %s
24072 %s Message: %s
24075 %s Message submitted by %s
24076 %s Message delivered to %s
24077 %s Message received from %s
24078 %s Message transferred to %s
24079 %s Message redirected to %s
24081 %s : Distribution list expanded
24082 %s Message delivered locally to %s
24083 %s Message transferred in (Backbone) from %s
24084 %s Message transferred out (Backbone) to %s
24085 %s Message transferred out (Gateway) to %s
24086 %s Message transferred in (Gateway) from %s
24087 %s Report transferred out (Gateway) to %s
24088 %s Report transferred in (Gateway) from %s
24091 %s Report generated internally
24092 %s Report received from %s
24093 %s Report absorbed!
24094 %s Report transferred to %s
24095 %s Report delivered to %s
24096 %s Unroutable report discarded
24097 %s Message rerouted to %s
24098 %s MTA downgraded %s
24100 Find Recipients
24101 &Look in
24150 Client Permissions
24155 These values can be specified on a per mailbox basis on the Mailbox Advanced page.
24156 Warnings are sent to mailboxes at the times specified on the Storage Warnings schedule page of the Information Store Site Configuration object.
24157 This value can be specified on a per folder basis on the Public Folder Advanced page.
24158 Warnings are sent to folder contacts at the times specified on the Storage Warnings schedule page of the Information Store Site Configuration object.
24159 &Use Information Store Schedule
24160 The value you entered for number of days is either not a number or is too large.
24161 An error occurred while verifying the DS/IS consistency.
24165 DS/IS consistency has been successfully verified. For details on any adjustments made, see the application event log in the Windows NT Event Viewer on Microsoft Exchange Server computer '%s'.
24166 Are you sure you want to remove this folder instance?
24170 You cannot remove all replicas of the folder from this site.
24171 You cannot remove the folder '%s' because it is the only instance in this site.
24172 Originator
24173 Submit time
24174 Size (K)
24175 Preparing Subfolders for processing...
24176 %d folders to be processed.\nThis may take some time.
24177 Propagating properties to subfolders
24178 Propagating properties to folder %s.
24179 %s\n%s
24190 Messaging Ops
24191 Folder Ops
24192 Table Ops
24193 Transfer Ops
24194 Stream Ops
24195 Progress Ops
24196 Other Ops
24197 Total Ops
24199 Client Version
24200 Windows NT Account
24201 Logon Count
24202 Connect Time
24203 Full Mailbox Directory Name
24204 User Name
24205 Full User Directory Name
24206 Open Messages
24207 Open Folders
24208 Open Attachments
24218 Logon Type
24219 Code Page
24220 Locale ID
24221 Logon Time
24226 E-mail Address
24227 Display Name
24228 Last Access Time
24229 Connection Type
24230 Total K
24231 Total no. Items
24232 Total no. Associated Messages
24233 Folder Flags
24235 Last Logon Time
24236 Last Logoff Time
24237 Folder Path
24238 No. of Owners
24239 Mailbox
24240 This Replica (days)
24241 All Replicas (days)
24242 Removed Older Than
24243 Delete Pending
24244 (none)
24245 Deleted Items K
24248 Server Name
24249 Last Transmission Time (sec)
24250 Last Received Time
24251 Average Transmission Time (sec)
24252 Replication Status
24253 Folder
24254 Number of Replicas
24255 No. of Contacts
24256 Storage Limits
24257 Created
24258 &Close
24259 Host Address
24260 To modify a server database path you must run Microsoft Exchange Administrator on server '%s'.
24261 You have altered a server database path. In order to change the path\nthe corresponding service(s) will be stopped, the files will be moved,\nand then the service(s) will be restarted.\n\nAre you sure you want to alter the database path(s)?
24265 Stopping service '%s' on server '%s'...
24266 Connecting to the information store on server '%s'...
24275 Updating Paths
24276 Starting service '%s' on server '%s'...
24277 Moving %s...
24280 The selected path is in use by another Microsoft Exchange Server component.
24281 The move cannot proceed because at least one of the files already exists.
24282 There is not enough disk space to move the '%s'. In addition, any subsequent moves after this move were not processed. The list is processed from top to bottom.
24283 The file '%s' already exists so the %s was not moved. In addition, any subsequent moves after this move were not processed. The list is processed from top to bottom.
24284 The original file will not be removed because the source and destination files differ in length.
24285 To modify a server database path in a Microsoft Cluster Server you must run Microsoft Exchange Administrator on cluster server '%s'.
24290 Updating Database Circular Logging
24291 You have turned on circular logging for the Directory or Information Store services. You will only be able to perform full backups, not differential or incremental backups.
24292 In order to save the database circular logging settings on server %s,\nthe corresponding service(s) will be restarted.\n\nAre you sure you want to save the circular logging settings?
24300 You cannot remove the last information store from the server.\n
24301 If you want to have only a private or public information store on this server, add that information store before deleting this one.
24302 If you delete the private information store on %s, all mailboxes on this server will also be deleted.\n\n
24303 Before continuing this process, use the Move Mailbox command to move the mailboxes that you want to save to another server.\n\n
24304 Choose OK to start deleting the private information store.
24305 If you delete the public information store on %s, all public folder instances on this server will also be deleted.\n\n
24306 Before continuing this process, you must use the Microsoft Exchange client to copy the data from public folders that exist only on this server.\n\n
24307 Choose OK to start deleting the public information store.
24308 You cannot delete the last public information store from the site.\n\n
24309 Before you delete this object, you must first create a public information store on another server in this site.
24310 The user canceled the deletion of the private information store.
24311 The user canceled the deletion of the public information store.
24312 The action could not be completed because the Microsoft Exchange Information Store service on server %s is unavailable. Check to see that the service is running.
24314 This Private Information Store is being used. Remove the Directory Replication Connector first.
24315 There are no available Microsoft Exchange Information Store services in the site. Check to see that at least one server in the site has this service running.
24320 Removing Private Information Store
24321 Removing Public Information Store
24322 Stopping service '%s' on server '%s'...
24323 Starting service '%s' on server '%s'...
24324 Deleting %s...
24325 Select Server for Public Store
24326 New public store server
24327 Removing server '%s' from public folder replica lists...
24330 Creating Public Information Store
24331 Creating Private Information Store
24332 Stopping service '%s' on server '%s'...
24333 Writing information store object to server '%s'...
24334 Updating directories from '%s' to '%s'...
24335 Starting service '%s' on server '%s'...
24336 All servers have Private Information Stores.
24337 All servers have Public Information Stores.
24338 The public folder server property on the Private Information Store of %s has not been adjusted to point to the newly created Public Information Store. You should not change this property until the public folder hierarchy has been replicated to the new Public Information Store. To verify that replication is complete, establish a new connection to %s, and view the Folders hierarchy.
24340 Directory Database
24341 Directory Transaction Logs
24342 Directory Working Path
24350 Private Information Store Database
24351 Public Information Store Database
24352 Information Store Transaction Logs
24353 Information Store Working Path
24400 Unknown: %4d
24401 Boolean
24402 Enumeration
24403 General String
24404 Generalized String
24405 Graphic String
24406 IA5 String
24407 Integer
24408 Null
24409 Numeric String
24410 Object(%s)
24411 Object Descriptor String
24412 Object Identifier String
24413 Octet String
24414 Printable String
24415 Teletex String
24416 Teletex String (Extended)
24417 Unicode String
24418 UTC Time String
24419 Videotex String
24420 Visible String
24430 Distinguished Name
24431 OR Name
24432 Replica Link
24433 Access Point
24434 Presentation Address
24440 Min value:
24441 Max value:
24442 Min length:
24443 Max length:
24444 None
24445 %d (%d hex digits)
24450 Single
24451 Multiple
24460 System
24461 Admin
24462 User
24463 Security Admin
24464 Unknown: %d
24465 Attri&bute value:
24466 Attri&bute values: %d
24467 &Editor...
24468 Vi&ewer...
24470 Existing
24471 Nonexisting
24472 Required
24473 Optional
24474 All
24475 Added
24476 Modified
24477 Removed
24480 Access point
24481 NT security descriptor
24482 NT security identifier
24483 Replica link
24484 Schedule
24485 Text
24486 Universal time code
24487 X.400 address
24488 Properties
24489 File Version
24500 Attribute viewer selection
24501 &Viewer type
24510 WARNING: %s without prior consultation with Microsoft Product Support Services. Do not proceed unless you completely understand the potential adverse effects that incorrect usage of this feature could have on an entire site.
24511 %s will take effect immediately and will replicate to other servers.\n\nAre you sure you want to proceed?
24512 Schema objects should not be modified
24513 The pending modifications
24514 A raw delete should not be performed
24515 The selected object and all objects below it will be deleted from the directory service. Deletions
24520 The Administrator program can display only raw properties for objects of this type. Do you want to view raw properties for this object?
24521 You cannot create objects below the selected object in the hierarchy.
24522 You must enter a value for '%s' because it is a required attribute for this object class.
24523 Operations on attributes of this syntax are not supported.
24524 The object identifier specified does not identify any object that currently exists in the schema.
24550 Password change is not complete. If you quit now, replication between servers will fail. Are you sure you want to quit?
24551 Initializing Service Account Password Change
24552 The password of service '%s' on server '%s' is being changed.
24553 There were %d errors encountered. To view details, see the application event log in the Windows NT Event Viewer.
24554 This action has changed the password for Windows NT services installed by Microsoft Exchange Server. The password for the service account must also be changed in the Windows NT User Manager or the services will fail to start.
24555 The following is a list of servers that are part of a Microsoft Cluster Server and are also part of this site configuration:\n%s\nYou need to change the service account permissions on these servers manually.
24560 Address
24561 Mask
24562 Action
24563 Accept
24564 Reject
24565 Are you sure you want to remove this connection filter?
24566 Are you sure you want to remove %d connection filters?
24567 One or more selected connection filters could not be removed.
24570 MIME Content Type
24571 Associated Extension
24572 Are you sure you want to remove this MIME type association?
24573 Are you sure you want to remove %d MIME type associations?
24574 One or more selected MIME type associations could not be removed.
24575 You must enter a MIME type in the form type/subtype.
24600 Outbound connection account information is required. Specify an account that will be used to connect to the remote server for outbound newsfeed.
24601 Inbound connection account information is required. Specify an account which the remote server will use to connect to Microsoft Exchange Internet News Server for inbound newsfeed.
24602 You must restart the Microsoft Exchange Internet News Services for your change to take effect.
24603 You have specified a duplicate Host name/IP address for the '%s' field.
24604 Unable to access the Microsoft Exchange Information Store service. Verify that the service is installed and started.
24607 You must select a mailbox or custom recipient as a Microsoft Exchange account for the inbound host.\nDo you want to try again?
24608 You must select a mailbox or custom recipient that has Primary NT account specified.
24609 You must select a mailbox as Internet News Administrator.\nDo you want to try again?
24610 There is no active list defined in this newsfeed.\n\nDo you wish to import an active list?
24611 &Include
24612 &Exclude
24613 Select the &newsgroups to include in your outbound newsfeed
24614 Internet News Administrator
24615 This public folder cannot be removed from the newsgroup hierarchy\nlist because one of its parent folders is also a newsgroup hierarchy.
24616 This folder cannot be added to the newsgroup hierarchy list because it is already in\na newsgroup hierarchy, or a newsgroup with the same name already exists.
24620 Load Active File
24621 active
24622 Save Newsfeed File
24623 newsfeed
24624 Exchange account for Inbound host
24625 Newsgroups are pulled inbound.
24626 Newsgroups are accepted inbound.
24627 Newsgroups are pushed outbound.
24628 Newsgroups are pulled inbound and posted outbound.
24629 Newsgroups are accepted inbound and pushed outbound.
24630 <None>
24631 Are you sure you want to create the new location '%s'?
24632 Adjusting DS/IS inconsistencies...
24700 The grouping you specified is not valid. You cannot select the same attribute more than once.
24701 Do you want to remove empty view containers from this Address Book View?
24702 You must select at least one Group By attribute.
24703 A process has been started to update the Address Book View.
24704 You must provide a value for the 'Grouping value' field.
24705 The Address Book View must be rebuilt to complete the changes you have requested. Do you want to continue?
24706 Deleting view %s will delete all view containers created underneath it. Any recipients that appear in this view will not be affected. Are you sure you want to delete this view?
24710 (None)
24711 Site
25000 File - Connect to Server
25001 File - New Mailbox
25002 File - New Distribution List
25003 File - New Custom Recipient
25004 File - Properties
25005 Tools - Directory Import
25006 Tools - Directory Export
25007 Tools - Find Recipients
25008 Tools - Move Mailbox
25009 Tools - Clean Mailbox
25010 Tools - Start Monitor
25011 Tools - Track Message
25012 Tools - Forms Administrator
25013 Show Global Address List
25014 Show Public Folders
25015 Show Site
25016 Show Configuration
25017 Show Servers
25018 Show Monitors
25019 Show Connections
25020 Show Replication
25021 Show Protocols
25022 Show Recipients
25023 Show Address Book Views
25027 Tools - Add recipient to Address Book View
25030 Toggle Pane View
25031 Up One Level
25040 Edit - Delete
25041 Window - Refresh
25100 Connect to server
25101 New Mailbox
25102 New Distribution List
25103 New Custom Recipient
25104 Properties
25105 Directory Import
25106 Directory Export
25107 Find Recipients
25108 Move Mailbox
25109 Clean Mailbox
25110 Start Monitor
25111 Track Message
25112 Form Administrator
25113 Global Address List (Ctrl+Shift+G)
25114 Public Folders (Ctrl+Shift+P)
25115 Site (Ctrl+Shift+I)
25116 Configuration (Ctrl+Shift+C)
25117 Servers (Ctrl+Shift+S)
25118 Monitors (Ctrl+Shift+T)
25119 Connections (Ctrl+Shift+N)
25120 Replication (Ctrl+Shift+R)
25121 Protocols (Ctrl+Shift+O)
25122 Recipients (Ctrl+Shift+E)
25123 Address Book Views (Ctrl+Shift+A)
25127 Add recipient to Address Book View
25130 Show/Hide Container View (Ctrl+Shift+V)
25131 Up One Level
25140 Delete
25141 Refresh
25200 Server
25201 View Filter
25210 Mailboxes
25211 Distribution Lists
25212 Custom Recipients
25213 Public Folders
25214 All
27001 HttpPublicFolderHeader
27002 HttpInternetServersHeader
27100 Folder Shortcuts
27103 Public folder shortcuts
27104 New folder shortcut:
27105 Public Folders
27106 Are you sure you wish to remove this folder from the list of public folder shortcuts?
27107 Unavailable
27108 The folder '%s' already exists in the list of public folder shortcuts. Specify another folder.
27120 Internet Servers
27121 Internet information servers with Web Service
27130 Advanced
31000 Setup is configuring directory replication...
31001 Setup is removing previously installed components...
31002 Setup is installing the basic directory information...
31003 Setup is adding objects to the directory...
31004 Setup is making sure the system is ready for installation
31005 Setup is verifying service account and password...
31010 Microsoft Exchange Server
31011 Microsoft Exchange Server 5.5
31020 Setup has detected servers in this site running version 4.0 of Microsoft Exchange. Unless these servers are first upgraded to Microsoft Exchange 4.0 Service Pack 2, replication to them will stop until they have been restarted. For more information see the Release Notes, under 'Upgrading to Microsoft Exchange Server 5.5'.
31021 Setup has detected replication bridgehead servers in this site running version 4.0 of Microsoft Exchange. Replication to other sites using these servers will stop unless they are first upgraded to Microsoft Exchange 4.0 Service Pack 2 or later. These bridgehead servers should be upgraded before any other servers in the site. For more information see the Release Notes, under 'Upgrading to Microsoft Exchange Server 5.5'.
31022 Setup needs to upgrade this site's directory schema to the 5.5 version. To install additional version 4.0 servers into an upgraded site, follow the instructions in the README file.
31023 Setup cannot upgrade the Microsoft Exchange 4.5 Beta.
31030 InstallJet
31031 InitDSA
31032 InitMTA
31033 InitMDB
31034 InitMAD
31040 CreateProcess
31041 CreateProcessSafe
31042 LoadCounters
31043 UnloadCounters
31049 CreateServiceManualAlways
31050 CreateServiceManual
31051 CreateService
31052 DeleteService
31053 StartService
31054 StopService
31060 OpenClassesKey
31061 OpenMachineKey
31062 OpenUserKey
31063 CreateKey
31064 CreateSecureKey
31065 DeleteKey
31066 CloseKey
31067 DeleteFilesAtKeyFilePath
31068 DeleteFilesAtKeyDirPath
31069 DeleteValue
31080 SetDword
31081 SetString
31082 SetExpandString
31083 SetExpandStringSystem
31084 AddExpandString
31085 SetMultiString
31086 SetBinary
31087 RegisterDLL
31088 UnregisterDLL
31090 AddShare
31091 SetStringDN
31092 SetStringEnterprise
31093 SetStringDomain
31094 SetStringServer
31095 RepSetup
31096 InstallCodePage
31100 ReplaceString
31101 ReplaceDword
31102 ReplaceExpandString
31103 ReplaceMultiString
31104 ReplaceExpandStringSystem
31105 CopyValueDWord
31106 CopyValueMulti_SZ
31107 RegistryCheckpoint
31108 RemoveServiceFromRestartList
31109 DeleteRegistryCheckpoint
31110 Cannot find the file.
31111 Processing file '%s', at or near line %d
31112 The file appears to be corrupted.
31113 An internal component is not responding.
31114 An internal component has failed.
31115 The command line is invalid.
31116 Setup is unable to initialize the key management database. For more information, see the application event log.
31117 You have entered an invalid path for either the master password or the backup password. Reenter the paths and try again.
31118 You must install Microsoft Transaction Server version 1.0 or higher before you attempt to install the Microsoft Exchange Event Service.
31119 You must install Microsoft Windows NT Server version 4.0 Service Pack 3 before installing the Key Management Server. SP3 is located on the Microsoft Exchange Server Preview compact disc.
31120 To install the Outlook Web Access component you need to have previously installed Windows NT 4.0, Internet Information Server (IIS) and Active Server Pages.
31121 You are attempting to install on an incorrect version of Windows NT.\nThe minimum requirement is Windows NT Version %d.%d (Build %d: Service Pack %d)
31122 This version of Microsoft Exchange Server requires Windows NT Server version %d.%d (Build %d: Service Pack %d) or later.
31123 A fatal error has occurred. Check that you have sufficient memory and disk space available.
31124 Unable to replicate from %s. You must remove and install this server again.
31125 The server you selected is running Microsoft Exchange Server version 4.0. Outlook Web Access requires version 5.0 or later. Please select another server.
31130 The MS Mail Connector failed to install properly
31131 Failed while attempting to remove the MS Mail Connector
31132 While attempting to create the %s service, the following error was encountered:
31133 While attempting to delete the %s service, the following error was encountered:
31134 While attempting to start the %s service, the following error was encountered:
31135 While attempting to stop the %s service, the following error was encountered:
31136 The command\n\n %s\n\nfailed, returning an error code of <%d>.
31137 Failed while attempting to write to the log file due to the following error. Continue without further logging?
31140 The ini value %s in section %s is too long.
31141 The ini value %s in section %s contains the invalid character '%c'.
31142 Errors were reported while importing data into the Microsoft Exchange directory. To view details, see the application event log in the Windows NT Event Viewer.
31143 Failed to open the log file. Continue without further logging?
31144 Failed while attempting to create a unique identifier for the Information Store. This is most likely a problem with the network card.
31145 An unexpected error occurred in the Microsoft Licensing Application.
31150 Outlook Web Access failed to install properly
31151 Failed while attempting to remove Outlook Web Access
31160 This version of Exchange does not support Servers whose Computer Names contain extended characters. To change your Computer Name run the Windows NT Control Panel and choose the Network icon.
31161 You must use the same language version of Microsoft Exchange Server Setup that you previously used.
31500 WARNING! This Microsoft Exchange Server has an existing Key Management Server installed. In order to uprade the encrypted key archive database, setup will require the original KM Server startup floppy disk or startup password before it can proceed. \n\nAlso, setup will make a backup copy of your startup floppy disk. Please make sure you have a blank, formatted floppy disk available.
31501 WARNING! There is already a KM Server installed in this site on server %s. There can only be one KM Server per site. You must remove the existing KM Server before you can install a new one.
31502 WARNING! This site is configured to use the KM Server in site %s, on server %s. If you install a new KM Server in this site, existing users in your site may no longer be able to recover their security keys. You should ONLY proceed with installing a new KM Server if you plan to remove the existing KM Server, and move the existing key archive database to this new KM Server. \n\nAre you sure you want to proceed with KM Server installation?
31503 Setup has detected a Key Management Server database in the KMSDATA directory. You must first move or remove all files from this directory. If you want to restore an old database, back it up and restore it after Setup completes. See Help for details on restoring a KM Server.
31504 WARNING! You have chosen to store the startup password on a non-removable disk. Anyone with physical access to this machine may be able to obtain the startup password. The startup password is the master key for your encrypted archive database. For maximum security, you should only store the startup password on removable media, such as a floppy disk. Keep the startup password disk under the direct supervision of a KM Server administrator when not in use. \n\nAre you sure you really want to store the startup password on %s, and a backup copy on %s?
31505 You cannot leave these fields blank. You must create both a primary and backup copy of the startup password.
31506 You cannot leave the password field blank if you choose to type in the password.
31507 You cannot leave the password location blank.
31508 The Startup Password could not be found at the specified location.
31509 The Startup Password is incorrect or invalid.
31510 Insert the master password disk in drive %s
31511 Insert the backup password disk in drive %s
31512 KM Server Setup did not successfully complete.
31513 The Key Management server password is used to encrypt the Key Management database. It must be provided in the startup parameters field on the services control panel every time the Key Management server is started. You should keep it in a secure place. This password will not be displayed again.\n\nKey Management server password: %s
31514 Setup is upgrading your Key Management Server database to the new format.
31515 In addition to installing a Certificate Server in your organization, you must install a Certificate Server client on the machine where you are installing KM Server. If you install the Certificate Server itself on the KMS machine, no client is necessary.
31516 These paths are not valid. At least one path must lead to a removable media such as a floppy disk.
31517 A KM Server password file already exists on %s. Re-enter the KM Server password paths.
31518 Setup has detected an older version of Key Management server. Setup cannot upgrade Microsoft Exchange Server if a previous version of KM server is already installed. See the release notes for details.
32000 %d is not a valid entry. Please specify a value between %d and %d for this field.
