home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1998 March
/
CHIPCD_3_98.iso
/
drivers
/
lexmark
/
value600
/
47wn315k.exe
/
README.1ST
< prev
Wrap
Text File
|
1996-02-26
|
4KB
|
100 lines
Lexmark 4047 5E Printer Driver for Microsoft Windows 3.1
Version 95.01.03
---------------------------------------------------------------
In addition to this README.1ST file you should also have the
following files:
File Name Size Date
------------- -------- ---------
LM4047.DRV 202240 07-07-95
LEX01.386 13919 13-05-94
LEXF4047.DLL 200064 08-06-94
LEXF4047.HLP 25207 27-07-94
LEXMMGR.DLL 15520 03-06-94
LEXMMGR.HLP 19644 30-06-94
LM4047.HLP 26207 30-06-94
LM4047O.HLP 15743 30-06-94
OEMSETUP.INF 269 26-05-94
PTAPIW16.DLL 114641 07-06-94
BIDIDRVR.SYS 4981 07-04-94
README.1ST 4409 26-02-96
Installation instructions for the Lexmark 4047 5E Printer
Driver for Microsoft Windows 3.1
1. Start Windows and select and open the MAIN program group.
2. Select and open the CONTROL PANEL program.
3. On the Control Panel dialog, select and open PRINTERS.
The Printers dialog will appear.
4. On the Printers dialog, select ADD. In the List of Printers box,
select "Install Unlisted or Updated Printer". Then select INSTALL.
5. The Install Driver dialog is displayed. Enter the drive (and
path) that contains the new driver files (examples - A:\ or
C:\(path)\) and select OK.
6. The Add Unlisted or Updated Printer dialog will be displayed. In
the List of Printers box, select the "Lexmark 4047 5E Printer",
then select OK to install the driver files.
7. When the driver files have been installed, the Printers dialog
will be redisplayed. Select the "Lexmark 4047 5E Printer"
in the Installed Printers box; then select CONNECT. The Connect
dialog will be displayed. Select the desired printer port, normally
LPT1:, and select OK. You will return to the Printers dialog.
8. Select Setup on the Printers dialog. The Lexmark 4047 5E
Printer dialog will be displayed. On this dialog, you can select
default print job attributes such as graphics resolution, paper
source, and paper size. Acknowledge your choices by selecting OK.
You will return to the Printers dialog.
9. To make the Lexmark 4047 5E Printer the currently active
printer, select SET AS DEFAULT PRINTER. Select CLOSE to exit
PRINTERS and return to the CONTROL PANEL.
10. Note! Before proceeding with this step, it is recommended that
you make a backup copy of the System.ini file in case an error
is made in the following edit process.
Add "device=LEX01.386" to the [386Enh] section of the System.ini
file. To do this, use an editor and open the System.ini file. Go
to the [386Enh] section and add "device=LEX01.386". Save the
edited System.ini file. Windows must be re-started for this
change to take effect. The basic installation is now complete. To
use bidi functions of the printer go to step 11.
11. Note! Before proceeding with this step, it is recommended that
you make a backup copy of the C:\CONFIG.SYS file in case an error
is made in the following edit process.
For the bidi functions of the Lexmark 4047 5E Windows driver to
work properly, the CONFIG.SYS file must include the following
item:
DEVICE=c:\xxx\BIDIDRVR.SYS
where c:\xxx is the directory where file BIDIDRVR.SYS resides.
To add "DEVICE=c:\xxx\BIDIDRVR.SYS" to CONFIG.SYS, use an editor
and open the CONFIG.SYS file. Add "DEVICE=c:\xxx\BIDIDRVR.SYS"
as a new line. Save the edited CONFIG.SYS file. Copy the new
BIDIDRVR.SYS file to directory c:\xxx. Your PC must be re-
booted for this change to take effect. The installation is now
complete.