130 site1, link cost1; site2, link cost2; ... or global link cost
131 address1, CN1; address2, CN2; ... or global CN
132 Unable to obtain the value of %s from %s.
133 Unable to process the %s key in %s.\n\n%s: %s\n\nExpected value: %s
134 Unknown value
135 The connect network already exists
136 The connected network does not exist
137 The address is not valid for this computer.
138 The site does not exist
139 Unable to determine the link cost
140 Unable to determine the device size
141 Microsoft Message Queue Setup Error
142 Error:
143 Error code = 0x%lX.
144 Microsoft Message Queue Setup Warning
145 Warning:
146 Exit Setup?
147 Setup is not yet complete.\n\nIf you quit now, the product will not be installed properly. You can run setup at a later time to complete the installation.\n\nAre you sure you want to exit?
148 Click "Cancel" to terminate setup.
149 Do you want to continue?
150 Previous Installation Detected
151 Setup detected that an MSMQ server was previously installed on this computer. Installing an MSMQ independent client will render that server inaccessible.
152 Setup detected that an MSMQ client or RAS connectivity service was previously installed on this computer. Installing an MSMQ server will render that installation inaccessible.
153 Setup detected that an MSMQ client or server was previously installed on this computer. Installing an MSMQ RAS connectivity service will render that installation inaccessible.
154 Computer Already Registered
155 This computer is currently registered on the information server as a %s. Installing it as a %s may lead to inconsistent behavior.
156 Setup must stop the following service(s):%s
157 Stop Running Services?
158 Delete Storage Files?
159 Setup will permanently delete the storage files created by the Microsoft Message Queue Manager.
160 Corrupted MQIS Database
161 The local MQIS database does not recognize this computer as being a previously installed PEC. Setup must delete the contents of the local MQIS database and recreate it with new information. All enterprise information will be lost.
162 The local MQIS database is corrupted. Setup must delete the contents of this database and recreate it with new information. All site-specific information will be lost.
163 Unrecognized PSC
164 The PEC does not recognize this computer as being a previously installed PSC. Setup must delete the contents of the local MQIS database and recreate it with new information. All site-specific information will be lost.
165 Delete Enterprise?
166 Removing the Primary Enterprise Controller will remove the entire enterprise.
167 Delete Site?
168 Removing the Primary Site Controller will remove the entire site.
169 Insufficient Privilege
170 Obtain the necessary privilege from the enterprise administrator and click "Retry".
171 Insufficient privilege for this operation.
172 Insufficient privilege to create a site in the Primary Enterprise Controller.
173 Insufficient privilege to create site links in the Primary Enterprise Controller.
174 Insufficient privilege to delete site links in the Primary Enterprise Controller.
175 MSMQ Application Running
176 Please terminate all MSMQ applications and click "Retry".
177 Setup cannot proceed because an MSMQ application is running.
178 Control Panel Running
179 Please terminate the Control Panel and click "Retry".
180 Setup cannot proceed because the Control Panel is running.
181 Information Server Database Creation Error
182 Correct the problem using SQL Server Enterprise Manager and click "Retry" to return to the previous dialog box.
183 Unable to create the MQIS database on SQL Server.
184 The MQIS database on SQL Server already exists.
185 Cannot obtain a new virtual device number on SQL Server.
186 Unable to create the MQISData device on SQL Server.
187 The MQISData device on SQL Server already exists.
188 The MQISData device on SQL Server is used by another database.
189 The mqisdata.dat device file already exists in the specified folder.
190 Unable to create the MQISLog device on SQL Server.
191 The MQISLog device on SQL Server already exists.
192 The MQISLog device on SQL Server is used by another database.
193 The mqislog.dat device file already exists in the specified folder.
194 Nonexistent Folder
195 Unable to load %s.
196 Unable to obtain the address of %s in %s.
197 Unable to register the MSMQ ActiveX components.
198 Unable to delete this computer from the remote information server.\n\nPlease notify the site administrator.
199 IP
200 IPX
201 None
202 %s Addresses Assigned to Connected Networks
203 Assign each %s address listed below with a connected network, or "None".
204 Unable to set the security descriptor for the installation share.
205 Unable to share the installation folder.
206 Unable to determine the %s folder path.
207 Insufficient privilege to fully access the service control manager.
208 Unable to create the %s service.
209 Unable to delete the %s service.
210 Unable to open the %s service.
211 Unable to query the status of the %s service.
212 Unable to query the configuration of the %s service.
213 Unable to reconfigure the %s service.
214 Unable to start the %s service.
215 Unable to stop the %s service.
216 The item is marked for deletion. Reboot the computer and run setup again.
217 Unable to create the MQAC device driver.
218 Unable to delete the MQAC device driver.
219 Unable to create the queue manager process.
220 Unable to determine if the queue manager process is currently running.
221 Unable to initialize the local information server.
222 Unable to initialize the connection with the remote information server.
223 Unable to configure the performance counters.
224 Unable to create a process to run the command:\n%s
225 The following command has not completed within %ld minutes:\n%s
226 Unable to obtain an exit code for the command:\n%s
227 At least one site link must be specified.
228 data
229 log
230 data device
231 log device
232 data and log devices
233 Select the %s device folder.
234 Unable to convert the selection into a path.
235 The %s device folder is invalid.
236 The %s device folder is not on a local hard disk.
237 Cannot write to the %s device folder.
238 The %s device folder does not exist.\n\nDo you want to create it?
239 Setup cannot initiate a secured communications channel with the MSMQ information server. Either the server or the computer on which you are installing MSMQ is not configured for secure communication, or there is an unauthorized server on your MSMQ network. As a result, all further communications with this server and other servers will not be secure until the servers and the computer on which you are installing MSMQ are properly configured. \n\nFor more information, contact your MSMQ administrator or see "Securing Communication Between Controller Servers" in the MSMQ Release Notes (Readme.doc in the \MSMQ folder on the Windows NT Server/E 4.0 Components CD).\n
240 The %.1s: drive does not have sufficient free disk space to create the %s.
241 The enterprise name cannot be blank.
242 The connected network name cannot be blank.
243 The site name cannot be blank.
244 The server name cannot be blank.
245 Enter the server name of the Primary Enterprise Controller.
246 Enter the server name of the Primary Site Controller\nfor this Backup Site Controller.
247 Enter the server name of the Primary Site Controller\nor Backup Site Controller for this Routing Server.
248 Enter the server name of the Primary Site Controller\nor Backup Site Controller.
249 At least one connected network must be created.
250 The connected network already exists.
251 Setup is querying the server...
252 Setup is creating the MQIS database...
253 Setup is copying the MQIS database...
254 Setup is configuring SQL Server...
255 Microsoft Message Queue Access Control
256 Microsoft Message Queue Service
257 Microsoft Message Queue RAS Connectivity Service
258 No Server Authentication
259 Unable to obtain the path of SQL Server from the registry.
260 Unable to delete the MQIS database on SQL Server.
261 The information server is full.
262 Unable to configure the MQIS ODBC data source.
263 Unable to create stored procedures on the %s database of SQL Server.
264 Unable to copy the %s table from the remote information server.
265 Unable to copy the %s table into the local information server.
266 Unable to enable the 'read only' option on the remote database.
267 Unable to disable the 'read only' option on the remote database.
268 Unable to delete the non-enterperise-scope queues from the local information server.
269 Unable to delete the non-enterperise-scope deleted objects from the local information server.
270 Unable to delete the %s table from the local information server.
271 Microsoft Message Queue can be installed only on Windows NT 4.0 Service Pack 3 or above, or Windows 95.
272 Unable to determine whether Windows NT Server is running on this computer.
273 Windows NT Server, Enterprise Edition must be installed in order to configure an MSMQ server.
274 Internet Explorer 3.0 or above must be installed prior to running Microsoft Message Queue setup.
275 Unable to open the %s\%s registry key.
276 Unable to set the %s registry value.
277 Insufficient privilege to create %s\%s in the registry.
278 Unable to set the session registry key.
279 Primary Enterprise Controller
280 Primary Site Controller
281 Backup Site Controller
282 Routing Server
283 independent client
284 Unable to create the enterprise on the local information server.
285 Unable to obtain the ID of the enterprise from the information server.
286 Unable to create the connected network '%s' on the local information server.
287 Unable to lookup connected networks on the information server.
288 Unable to create the site on the information server.
289 Unable to delete this site from the Primary Enterprise Controller.
290 Unable to lookup this site on the information server.
291 Unable to lookup sites on the remote information server.
292 Unable to modify the security attributes of this site. To enable the addition of computers to the site, manually change the site security using the MSMQ Enterprise Manager after setup completes.
293 Unable to create a link to site '%s' on the remote information server.
294 Unable to delete a site link from the remote information server.
295 Unable to create the computer on the information server.
296 Unable to delete the computer object from the remote information server.\nIf you press cancel, setup will continue, but your site administrator will have to delete this computer from the information server manually.
297 Unable to obtain the ID of this computer from the local information server.
298 Unable to obtain the ID of this computer from the remote information server.\nIf you press cancel, setup will continue, but your site administrator will have to delete this computer from the information server manually.
299 Unable to obtain the site ID of this Backup Site Controller from the local information server.
300 Unable to obtain computer properties from the information server.
301 Unable to set computer properties on the information server.
302 Unable to modify the security attributes of this computer. To enable this installation to function properly, use the MSMQ Enterprise Manager after setup completes to add the \"Set Properties\" access to everyone.
303 Cannot connect to the remote information server.
304 Unable to obtain server machine properties from the remote information server.
305 Unable to determine the type of this server from the registry.\n\nPlease notify the enterprise administrator.
306 Unable to delete all the queues belonging to this computer from the remote information server.
307 Unable to lookup queues on the remote information server.
308 The remote information server is not the Primary Enterprise Controller.
309 Unable to find a connected network for the protocol(s) running on this computer.
310 At least one address must be associated with a connected network.
311 Unable to create the private %s queue.
312 Unable to store the cryptographic public keys of this computer on the information server. This may be caused by an attempt to compromise the MSMQ security system.\n\nPlease notify the site administrator. It is recommended that this computer be removed from the information server.
313 Unable to store the cryptographic public keys of this computer on the information server. This computer will not be able to send or receive encrypted messages.
314 Unable to obtain the server name of the Primary Enterprise Controller from the local information server.
315 Unable to obtain the server name of the Primary Site Controller from the local information server.
316 Unable to delete this Primary Site Controller from the Primary Enterprise Controller.\n\nPlease notify the enterprise administrator.
317 Unable to delete this Backup Site Controller from the Primary Site Controller.\n\nPlease notify the site administrator.
318 Access denied.
319 Memory allocation failed.
320 The computer could not be found.
321 Write request did not reach the required PSC.
322 At least one queue still belongs to this computer.
323 Illegal user.
324 The object could not be found.
325 Invalid object owner.
326 Setup cannot proceed because the following services are not stopped:%s
327 The Remote Access Service is not installed on this computer. To enable the RAS Connectivity Service to function properly, install the Remote Access Service after setup completes.
335 Setup detected that an MSMQ server was previously installed on this computer. Installing an MSMQ dependent client will render that server inaccessible.
336 Setup detected that an MSMQ independent client was previously installed on this computer. Installing an MSMQ dependent client will render that independent client inaccessible.
337 Server Name
338 &Server Name:
339 Enter the name of the MSMQ server.
340 Setup detected that an MSMQ dependent client was previously installed on this computer. Installing an MSMQ independent client will render that dependent client inaccessible.
341 Cannot find the RSA DLL (rsabase.dll). Try reinstalling NT or the latest service pack.
342 Cannot determine the version of the RSA dll (rsabase.dll). This dll may be dammage. Try reinstalling NT.
343 The RSA dll (rsabase.dll) is too old for MSMQ to work properly. You may need to install service pack 2 or later on your computer.
344 You are logged on as a local user (not a domain user). Your message queuing operations will not be secured.
345 Security
346 Setup could not determine whether or not you are logged in a domain. This may make your new installation unsecure.
347 You are logged on as a local user (not a domain user). Installing an MSMQ server while logged on as a local user can make your entire enterprise insecure
348 You cannot modify the PEC / PSC database.\nPlease make sure that:\n\n1. Both local and PEC / PSC databases are using Windows NT Integrated Security (see SQL Server documentation).\n\n2. You have administrator privileges on both databases.\n\nThen, re-run setup.
349 SupportingServer
350 Cannot install MSMQ on the specified path. MSMQ must be installed on a fixed drive.
351 Cannot find a protocol that you can use to communicate with your server. This protocol must be determined so that your server can be used as a transaction coordinator.
352 Cannot write DTC Information to the registry.
353 Could not set the MS DTC parameters. These are necessary for MSMQ to send transactional messages.\nIf you choose to continue, you may try to fix the problem later using the MSDTC Control Panel applet.\nContinue?
354 Could not find the MS DTC entry in the Registry, under %s\%s.
355 An error occurred while searching for the MS DTC Registry entry
356 MS DTC service was not installed.
357 Cannot start the MS DTC service. You may not be able to send transactional messages.
358 The %1 device file (%2) already exists. Delete?
359 Unable to delete the file %s
360 Setup detected an older version of the MQIS database on this computer.\nSetup cannot continue unless this database is deleted.\n\nDelete old database?
362 Setup was unable to determine whether or not an MSDTC server is installed on this computer.
363 Unable to lookup %1 "%2" on the information server.
364 Computer
365 ServerAuthenticationOnly
366 Queue
367 Site
368 %s
369 %1 "%2" succesfully created.\nHowever, information replication was not sent to your local MQIS Server yet.\nSetup cannot continue until this %1 is replicated.\n\nPress "Retry" to try again, "Cancel" to exit setup.
370 Setup had detected an old version of the MSMQ database on this server. This version cannot be updated. To delete it, you must explicitly set the appropriate parameters in the setup INI file.
371 MSDTC
372 Yes
373 No
374 Yes or No
375 ContinueIfMSDTCFails
376 MSDTC Application Running
377 Please terminate all applications that use MSDTC and click "Retry".
378 Setup cannot proceed because an application that uses MSDTC is running.
379 ClusterName
380 Unable to update columns in MQPurge table on the local information server.
381 Unable to add task to SQL Executive
382 master
383 mqis
384 The server you specified is not reachable. Please click "Retry" to specify another server or click "Cancel" to use the current server.
385 The server you specified is not an MSMQ server. Only MSMQ servers can handle dependent clients.
386 Login failure
387 Please use the Services icon in Control Panel to correct the login account and then click "Retry".
388 Login failure while trying to start the MSSQLServer service.
389 Login failure while trying to start the SQLExecutive service.
390 Login failed because the Services icon in Control Panel is open.
391 Please close the Services icon and Control Panel and then click "Retry".
392 NT Server/E
393 NT Server
394 ODBC Application Running
395 Please terminate all applications that use ODBC and click "Retry".
396 Setup cannot proceed because an application that uses ODBC is running.
397 Unable to install SQL Server. To solve the problem, you can either:\n\n1.Install MSMQ from the Windows NT Server, Enterprise Edition Components CD. (SQL cannot be installed from an MSMQ installation share).\n\n2. Install SQL Server manually and then install MSMQ. You can install either the retail version of SQL Server, or the limited version provided on the Windows NT Server, Enterprise Edition Components CD.\n
398 Unable to disable write operations on the remote information server.
399 Unable to enable write operations on the remote information server.
400 MSMQ Setup detected that the following components are not installed on this machine: \n\n%s\n Please quit MSMQ setup, install these components and then run MSMQ Setup again.
401 There are missing files in the installation media. Could not find file RSABASE.DLL.
402 Could not find file RSABASE.DLL in the system folder of this computer. Please install Internet Explorer 3.0 or higher and restart setup.
403 Failed to install the Cryptographic Service Provider.
404 Failed to register the post boot setup program.
405 Failed to remove MSMQ service.
406 Failed to install MSMQ service.
407 NT Workstation
408 Dcom95
409 Internet Explorer 3.0 or higher
410 Windows NT Server must be installed in order to configure an MSMQ server.
411 Disk '%C' is not a shared cluster disk. Please select another disk.
412 MSDTC cluster resource is defined in a different group ofr the MSMQ disk.\nPlease select a different disk, or use the cluster administrator to put the disk and the MSDTC resource in the same group.
413 MSSQL cluster resource is defined in a different group of either the MSMQ disk or the MSDTC resources.\nPlease select a different disk, or use the cluster administrator to put the disk, MSDTC and MSSQL resources in the same group.
414 No Network Name resource was defined in the same group as the MSMQ disk, and no Cluster Name resource was found in your cluster.\nPlease select another disk, or use the cluster administrator to add a network name to the MSMQ disk resource group.
415 No Network Name resource was defined in the same group as the MSMQ disk.\nPlease select another disk, or use the cluster administrator to add a network name to the MSMQ disk resource group.
416 Setup found an MSMQ cluster resource, but not in the same group as the MSMQ disk resource. \nPlease select another disk, or use cluster administrator to delete the old MSMQ resource or to move it to the same group as the MSMQ disk.
418 Cannot stop the MSMQ server on the cluster.
419 Cannot stop the %S service on the cluster.
420 Could not create an %S resource on the cluster.
421 Could not change the group of cluster resource %S. Please make sure this group belongs to the cluster node that setup is running on.
422 MSMQ could not find the %S cluster resource, which is required for proper installation of MSMQ as a fail safe MSCS resource.\n\nFor more information, please refer to "How do I install an MSMQ MQIS Server on an MSCS Cluster from Windows NT 4.0 Option Pack" in http://www.microsoft.com/support/messageq/content/faq/
423 Could not add a cluster resource dependency between %S and %S
424 Cannot add a dependency between %S and a network name resource.
425 Cannot add a dependency between %S and a disk resource.
426 Cluster function ClusterGroupOpenEnum failed.
427 Cluster function CloseClusterResource failed for resource %S.
428 Cluster function ClusterGroupEnum failed.
429 Cluster function OpenClusterResource failed for resource %S.
430 Cluster function CloseClusterGroup failed on group %S.
431 Cluster function OpenClusterGroup failed on group %S.
432 Cluster function ClusterOpenEnum failed.
433 Cluster function ClusterResourceControl was called with code %X and failed.
434 Could not bring '%s' online on the cluster.
435 Cannot move disk '%C' to the same cluster group as the MSMQ resource.\nYou can try to move the disk reource using the cluster administrator.
436 Cluster resource %S is no longer available.
437 Setup had waited %d minutes for a service to stop.\n\nPress 'Retry' to continue waiting, 'Cancel' to exit setup.
438 Could not stop %s service on the cluster.
439 Could not start %s service on the cluster.
440 Cannot get %s function address.
441 Could not add a registry checkpoint to MSMQ resource on the cluster. The MSMQ registry may not be copied in case of fail-over.
442 Could not open the cluster IP address resource '%S'.
443 Setup had detected that the MSMQ installation on this computer used to be a fail-safe cluster installation. However, setup did not detect a cluster on this computer.\nIf you choose continue, setup will invalidate the fail-safe option. This may cause MSMQ to fail if clustering will be enabled on this computer again.
444 Cluster is no longer available
445 Setup could not delete the cluster name key from %s.
446 ResUtilFindSzProperty function failed on the cluster.
447 Setup could not take the old File Share cluster resource %S offline.\nAs a result, the installation share may not point to the right directory (%s).
448 Setup could not delete the old File Share cluster resource %S.\nAs a result, the installation share may not point to the right directory (%s).
449 Setup could not create a FIle Share resource on the cluster.
450 Could not bring '%S' online on the cluster.
451 Setup could not change the MSDTC service startup option to Manual. After Setup is complete, you must manually change this option in Services in Control Panel
452 Setup could not delete a registry checkpoint from the %S resource.\nPlease use the cluster administrator to make sure that this resource belongs to the curent node.
453 Cannot get a cluster resource type.
454 Could not set the security of directory %s
455 Microsoft Message Queue
456 Setup needs at least %dMb free on drive %.1s:.\nPlease free the necessary space and press "Retry".\nTo Exit setup, press "Cancel".
459 Setup is installing the MSMQ limited version of SQL server...
460 Setup cannot continue because the database is locked by another MQIS server installation.\n\nYou can run setup again later, after the other installation is completed.
461 Unable to expand tempdb database
462 Unable to resize master database device
463 True
464 False
465 Setup decided to use cluster network name %S as MSMQ network name. However, this network name was not found in a later stage of setup. \n\nPlease use cluster administrator to make sure that all your cluster resources are set up correctly.
466 Setup could not create directory %s
467 SQL clustering wizard (wpwiz.cmd) could not run.\n\nPossible reason: MSMQ is not being installed from the originalWindows NT Server, Enterprise Edition CDROM. SQL clustering Wizard cannot run from an installation share.
468 Setup is running the SQL clustering wizard...
469 Setup had waited %d minutes for a service to start.\n\nPress 'Retry' to continue waiting, 'Cancel' to exit setup.
470 Database size is too large.\n\nMSMQ setup just installed a limited version of SQL server on this computer. This version does not allow the combined size of the log and data devices to exceed %dMB. \n\nIf you want to use a larger database, you need to install a retail version of Microsoft SQL Server before installing MSMQ.
471 MSMQ Setup found a newer version of Microsoft Message Queue which was installed on this machine from Windows NT 4.0 Option Pack CD. Please exit setup and use the Option Pack CD for maintenance of Microsoft Message Queue.
472 Setup failed to properly configure SQL Server on the cluster.\n\nPlease use the Cluster Administrator to make sure that:\n1. Both cluster nodes are installed and online.\n2. Both the Cluster Group and the MSMQ shared disk group are online on the current node.\n3. The Windows root directory has the same path name on both nodes.\n\nAfter fixing the problem, press "Retry".\nIf you press "Cancel", setup will fail, and you will have to manually uninstall SQL Server before running Setup again.
473 Skip MSMQ
474 Skip Microsoft Message Queue Setup ?
475 MSMQ Setup is not yet complete.\n\nIf you skip it, the product will not be installed properly. You can run setup at a later time to complete the installation.\n\nAre you sure you want to skip MSMQ setup?
476 MSMQ Connected Networks
477 MSMQ Site Links
478 MSMQ Information Server database on SQL Server
479 Cannot install MSMQ on the specified path. MSMQ path must contain Latin and numeric characters only.
480 Setup cannot initiate a secured communications channel with the MSMQ information server. Either the server or the computer on which you are installing MSMQ is not configured for secure communication, or there is an unauthorized server on your MSMQ network. As a result, all further communications with this server and other servers will not be secure until the servers and the computer on which you are installing MSMQ are properly configured. \n\nFor more information, contact your MSMQ administrator or see "Securing Communication Between Controller Servers" in the MSMQ Release Notes.\n
