home *** CD-ROM | disk | FTP | other *** search
- # This is the data file that is used for the processed data displays.
- # To change entries just follow certain rules. Keep all entries in the
- # same columns below and do not use tabs, only spaces. Keep entries
- # sequencial with nothing between lines. Comment lines must have a
- # '#' at the start of the line like this one and can only be at the
- # start. The columns below are first the entry number then the descritpion
- # of this entry. Then the next three are the coefficients to use for the
- # following equation: y = a(x * x) + bx + c where x is the raw value
- # and y is the processed value. The last column is the units.
- #
- # entry description a b c units
- #
- 0 Rx E/F Audio(W): +0.000 +0.0246 0.000 V(p-p)
- 1 Rx E/F Audio(N): +0.000 +0.0246 0.000 V(p-p)
- 2 Mixer Bias V: +0.000 +0.0102 0.000 Volts
- 3 Osc. Bisd V: +0.000 +0.0102 0.000 Volts
- 4 Rx A Audio (W): +0.000 +0.0246 0.000 V(p-p)
- 5 Rx A Audio (N): +0.000 +0.0246 0.000 V(p-p)
- 6 Rx A DISC: +10.427 -0.09274 0.000 kHz
- 7 Rx A S meter: +0.000 +1.000 0.000 Counts
- 8 Rx E/F DISC: +9.6234 -0.09911 0.000 kHz
- 9 Rx E/F S meter: +0.000 +1.000 0.000 Counts
- 10 +5 Volt Bus: +0.000 +0.0305 0.000 Volts
- 11 +5V Rx Current: +0.000 +0.000100 0.000 Amps
- 12 +2.5V VREF: +0.000 +0.0108 0.000 Volts
- 13 8.5V BUS: +0.000 +0.0391 0.000 Volts
- 14 IR Detector: +0.000 +1.000 0.000 Counts
- 15 LO Monitor I: +0.000 +0.000037 0.000 Amps
- 16 +10V Bus: +0.000 +0.05075 0.000 Volts
- 17 GASFET Bias I: +0.000 +0.000026 0.000 Amps
- 18 Ground REF: +0.000 +0.0100 0.000 Volts
- 19 +Z Array V: +0.000 +0.1023 0.000 Volts
- 20 Rx Temp: +101.05 -0.6051 0.000 Deg.C
- 21 +X (RX) temp: +101.05 -0.6051 0.000 Deg.C
- 22 Bat 1 V: +1.7932 -0.0034084 0.000 Volts
- 23 Bat 2 V: +1.7978 -0.0035316 0.000 Volts
- 24 Bat 3 V: +1.8046 -0.0035723 0.000 Volts
- 25 Bat 4 V: +1.7782 -0.0034590 0.000 Volts
- 26 Bat 5 V: +1.8410 -0.0038355 0.000 Volts
- 27 Bat 6 V: +1.8381 -0.0038450 0.000 Volts
- 28 Bat 7 V: +1.8568 -0.0037757 0.000 Volts
- 29 Bat 8 V: +1.7868 -0.0034068 0.000 Volts
- 30 Array V: +7.205 +0.07200 0.000 Volts
- 31 +5V Bus: +1.932 +0.0312 0.000 Volts
- 32 +8.5V Bus: +5.265 +0.0173 0.000 Volts
- 33 +10V Bus: +7.469 +0.021765 0.000 Volts
- 34 BCR Set Point: -8.762 +1.1590 0.000 Counts
- 35 BCR Load Cur: -0.0871 +0.00698 0.000 Amps
- 36 +8.5V Bus Cur: -0.00920 +0.001899 0.000 Amps
- 37 +5V Bus Cur: +0.00502 +0.00431 0.000 Amps
- 38 -X Array Cur: -0.01075 +0.00215 0.000 Amps
- 39 +X Array Cur: -0.01349 +0.00270 0.000 Amps
- 40 -Y Array Cur: -0.01196 +0.00239 0.000 Amps
- 41 +Y Array Cur: -0.01141 +0.00228 0.000 Amps
- 42 -Z Array Cur: -0.01653 +0.00245 0.000 Amps
- 43 +Z Array Cur: -0.01137 +0.00228 0.000 Amps
- 44 Ext Power Cur: -0.02000 +0.00250 0.000 Amps
- 45 BCR Input Cur: +0.06122 +0.00317 0.000 Amps
- 46 BCR Output Cur: -0.01724 +0.00345 0.000 Amps
- 47 Bat 1 Temp: +101.05 -0.6051 0.000 Deg.C
- 48 Bat 2 Temp: +101.05 -0.6051 0.000 Deg.C
- 49 Baseplt Temp: +101.05 -0.6051 0.000 Deg.C
- 50 FM TX#1 RF OUT: +0.0256 -0.000884 +0.0000836 Watts
- 51 FM TX#2 RF OUT: -0.0027 +0.001257 +0.0000730 Watts
- 52 PSK TX HPA Temp: +101.05 -0.6051 0.000 Deg.C
- 53 +Y Array Temp: +101.05 -0.6051 0.000 Deg.C
- 54 RC PSK HPA Temp: +101.05 -0.6051 0.000 Deg.C
- 55 RC PSK BP Temp: +101.05 -0.6051 0.000 Deg.C
- 56 +Z Array Temp: +101.05 -0.6051 0.000 Deg.C
- 57 S band TX Out: -0.0451 +0.00403 0.000 Watts
- 58 S band HPA Temp: +101.05 -0.6051 0.000 Deg.C
-