49 You cannot add music CD tracks to a Data CD Layout. To record a CD that includes music CD tracks, create an Audio CD Layout, or create a Mixed-Mode CD or CD Extra Layout.
56 An error occurred while reading from the CD-ROM drive. Ensure the drive is properly connected and the correct CD is inserted in the drive.
59 Digital audio extraction is not supported on this CD-ROM drive.
60 %1 is not a valid audio file and will not be added to the track list.
61 The specified track cannot be found. The CD may not be mounted!
63 %1 it is not convertible to CD quality and will not be added to the track list.
74 %d%% Complete
80 Composite Track
81 \ (Root Folder)
89 Do you wish to cancel this operation ?
93 Cannot add any more music CD tracks to the CD Layout. The total number of tracks cannot exceed 99.
95 The data you have selected exceeds the capacity of a blank CD. Remove one or more tracks and files from your CD Layout and try again.
98 No more tracks can be added to the track list. Delete one or more existing tracks before adding another track.
99 An error occurred while copying WAV file "%1" to a temporary file. Please remove the file from the track list and try again.
100 OLE initialization failed. Make sure you have the correct OLE libraries installed.
101 Failed to create object. Make sure the object is entered in the system registry.
102 The %1 WAV file cannot be played because another program is using the sound card.
104 The "%1" file cannot be added. .CL4 files are only added individually. Either add the .CL4 file or exclude it from the current selection.
108 The "%1" track is less than 4 seconds long and cannot be written to CD. %2
109 The CD cannot be created because the current layout is empty.
110 This track must be deleted before the CD or the CD image can be created.
114 Internal database error
115 Unable to add directory.
118 No tracks were selected. Select one or more tracks and click Add.
119 No audio files were selected. Select one or more files and click Add.
127 Select higher settings for faster audio copying. Select lower settings to correct buffer underrun problems.
128 Easy CD Creator\n\nECDCreat\nEasy CD Creator 4\n.cl4\nEasyCDCreator.Document.4\nEasy CD Creator Document
131 A new Music Cache entry could not be created for the track named '%1' due to insufficient memory.
Before retrying, please close unused Windows applications to free up memory resources.
132 The Music Cache does not currently have enough space available to hold the track named '%1'.\n\nBefore retrying, please make additional space available by increasing the size of the Music Cache, or by unlocking one or more Music Cache entries.
134 %1:
135 Are you sure you want to remove the selected item(s) from your CD Layout?
136 The operation cannot be completed because the selected CD-ROM drive is not capable of reading digital audio. Please run the CD-ROM System Test to diagnose this problem.
137 Corrupt Date
140 The "%1" file has an unrecognized file extension. Valid extensions are .WAV and .MP3. Please select a file with a .WAV or .MP3 file extension.
141 Easy CD Creator could not create an animation control. Try closing other applications or freeing up some system resources.
142 Easy CD Creator could not create an animation control. Try closing other applications or freeing up some system resources.
143 Easy CD Creator could not create an animation control. Try closing other applications or freeing up some system resources.
144 Preview
145 Add data folders and files here
146 Add audio tracks and audio files here
147 Use the existing audio tracks in the new CD Layout?
148 Use the existing data files and folders in the new CD Layout?
149 Use the existing audio tracks, data files, and folders in the new CD Layout?
166 The CD you are creating includes a data track with 0 files and %1 directories. Do you want to continue?
177 Easy CD Creator cannot read from "%1". Access Denied.
178 Easy CD Creator cannot write to "%1". Access Denied.
179 Easy CD Creator cannot read from "%1". Another program may be using the file.
180 Easy CD Creator cannot write to "%1". Another program may be using the file.
181 Easy CD Creator cannot read from "%1". This file is not a valid CD Layout file.
182 Easy CD Creator cannot write to "%1". This file is not a valid CD Layout file.
183 Easy CD Creator cannot read from "%1". The path is invalid.
184 Easy CD Creator cannot write to "%1". The path is invalid.
185 Easy CD Creator cannot write to "%1". The disk is full.
186 Easy CD Creator cannot read from "%1".
187 Easy CD Creator cannot write to "%1".
188 You cannot edit the audio material because the audio file named "%1" cannot be found.
189 You cannot edit the audio material because the audio file named "%1" cannot be found. Ensure that the correct disk is inserted before retrying.
191 Your Windows TEMP path is currently set to "%1". Easy CD Creator cannot use this directory to store temporary files because it is not on a hard disk,\n\nPlease select a different temporary directory.
192 Your Windows TEMP path is currently set to "%1". Easy CD Creator cannot use this directory to store temporary files because it is not on a valid directory name,\n\nPlease select a different temporary directory.
193 Easy CD Creator cannot use the directory named "%1" to store temporary file because it is not on a fixed disk.\n\nPlease select an alternate temporary directory.
194 Easy CD Creator cannot use the directory "%1" to store temporary files because it is not a valid directory.\n\nPlease select a different temporary directory.
198 The item "%1" cannot be found. Ensure there is a CD in the drive.
199 The item "%1" cannot be found.
201 Easy CD Creator cannot create audio or Mixed-Mode CDs, or work with audio files since the Windows MCI Sound driver is not loaded. Please install the driver via the Windows Control Panel.
205 You cannot add any data files to this CD Layout because all available tracks on the CD have been used for audio. Delete one or more audio tracks and try again.
206 Easy CD Creator Options
211 CD Layout Properties
213 Normal priority
225 Easy CD Creator could not initialize properly. Close a few programs and restart Easy CD Creator.
226 The path you have selected for the log file, "%1", is invalid. The previous selection will be restored.
229 Fixed location files
230 CD Extra Properties
234 You have reached the maximum number of countries that can be added to a CD Extra disc.
237 Dates (%1)
238 CD Extra Track Information
239 An error occurred while writing to the file. Ensure the disk is not write-protected, and there is at least %1 of free disk space.
240 Not enough free memory to read data from the CD-ROM drive (%1K required). Close other programs and try again.
244 Version %1\nTSID %2
245 Mixed-mode CDs must be created using the "Normal file ordering" and "Single data track only" CD Optimizer settings. The CD Optimizer settings have been changed to these values.
246 .cl4
247 EasyCDCreator.Document.4
248 .cif
249 EasyCDCreator.DiscImage.4
250 Easy CD Creator Image File
251 Record to CD
255 A CD Extra CD cannot be created because there are no audio tracks in the CD Layout. Add audio tracks to the CD Layout and try again.
256 A problem has occurred while generating files required for a CD Extra CD. To continue writing the CD without the required files, click OK. Click Cancel to stop writing the CD.
257 Missing files required for a CD Extra CD.
335 Explorer
336 CD Layout
337 Data CD
338 Audio CD
339 CD copy
340 Mixed mode CD
341 Mixed mode CD from image
342 CD from an image file
343 Multisession CD-ROM
344 CD Extra
345 Standard data ISO 9660 CD, in CD-ROM (Mode 1) or CD-ROM XA (Mode 2) format. It can be multisession, with data linking to an already present session on the disc, or single session, if the media is new, or if the loading previous session option is not selected.
346 Select a directory for temporary files:
348 Empty CD
349 Optimizing...
350 Easy CD Creator Lite
351 Empty CD Layout
352 CD Extra Layout
353 Mixed Mode CD Layout
354 Empty Data Layout
355 Empty Audio CD Layout
356 Audio CD Layout
357 <Audio Tracks>
358 (no selection)
359 (multiple selection)
360 No Effects
361 No ISRC
400 0 objects
401 %d audio track(s)
402 %d file(s), %d folder(s), %d audio track(s)
403 %d file(s), %d folder(s)
404 Estimated Time available for additional audio tracks: %d:%2.2d m:s
405 %s (Estimated CD Free Space %s)
406 %s / %d:%2.2d m:s (Estimated CD Free Space / Time %s / %d:%2.2d m:s)
407 Estimated Time on 74 min blank CD available for additional audio tracks: %d:%2.2d m:s
408 %s (Estimated CD Free Space on 74 min blank CD: %s)
409 %s / %d:%2.2d m:s (Estimated CD Free Space/Time on 74 min blank CD %s / %d:%2.2d m:s)
410 %ld %s, %ld %s
411 %ld %s, %ld %s, %ld %s
412 %2.2d min %2.2d sec
413 (%2d min %2d sec)
414 %2.2d min %2.2d sec %2.2 frm
1031 Writing table of contents (TOC)
1032 Please insert the destination CD into the CD-Recorder.
1033 Closing session
1034 Please insert a blank CD into the CD-Recorder.
1035 The CD in the CD-Recorder is not writable.
1036 The CD in the CD-Recorder is not a general-purpose CD.
1037 There is no CD in the CD-Recorder.
1038 The CD in the CD-Recorder does not have sufficient free space.
1039 The CD in the CD-Recorder is not blank.
1040 CD created successfully.
1041 Output device is invalid or unusable
1042 Unable to build source file list
1043 Errors reported by output device
1044 Cancelled by user
1045 Unknown or unexpected error occurred.
1046 Testing Phase
1047 Closing CD
1051 Unknown speed
1073 %1:
1096 Please insert a CD with sufficient space into the CD-Recorder.
1103 Start CD creation - device:%1
1104 End CD creation
1105 Writing track %1 - length %2 source file(s)
1106 Closing session
1107 CD Creation Canceled
1160 You have stopped the preparation of the current track and the track will not be recorded to the CD. Any remaining tracks, however, may still be recorded. Do you want to continue?
1164 The track named "%1" is less than 4 seconds long and cannot be recorded to the CD. All remaining tracks will still be recorded.
1166 Block %1 of %2
1167 Block %1 of %2
1170 Recording Phase
1171 The WAV file "%1" is different from "%2".\n\n Please try again to locate the correct file.
1173 The CD Player program is currently running on your system. Since this program can interfere with CD creation, close it before continuing.\nDo you want Easy CD Creator to close CD Player now?
1174 Unable to write the following tracks. The tracks require source material that is not available.
1175 Unable to continue writing to the CD. The remaining tracks require source material that is not available.
1178 The tracks you have selected cannot fit on the CD inserted in the CD-Recorder. Please insert a CD with higher capacity.
1179 Find WAV File
1180 wav
1181 , or delete some tracks from the layout and retry.
1182 , or use Easy Cd Creator to create the disc.
1183 error.log
1184 There are no supported CD-Recorders available. Ensure that your CD-Recorder is powered on and that all cables are properly connected.\nYou may also need to update Easy CD Creator to recognize your CD-Recorder.\nTo update Easy CD Creator select Web-Checkup from the Internet menu.
1185 The current track could not be prepared.
1186 You have chosen to stop preparing the current track.
1187 The current track cannot be recorded because some source material is not available.
1188 The current track could not be prepared. Since there are no more tracks to be recorded, the CD creation stops.
1189 The last time a CD was recorded using the currently selected layout, some tracks were skipped. Would you like to skip those tracks again?
1190 Easy CD Creator is in the process of creating a CD. Please wait until the CD is completed before closing Windows.
1191 %1% Done
1192 0% Done
1195 The current track could not be created. You may choose to create the image file then create the CD from that image file. Please cancel this operation.
1198 Are you sure you want to cancel?
1199 disc.cif
1200 Please enter %1 characters.
1201 Please enter not less than %1 characters.
1202 Please enter not more than %1 characters.
1204 Find Data File
1205 The file "%1" is not the same as "%2".\n\n Try again to locate the correct file.
1206 Ensure the source disk with volume label "%1" is in drive "%2:" and try again.
1207 Ensure the source disk is in drive "%1:" and try again.
1208 Easy CD Creator is writing to the CD.\nAre you sure you want to cancel?
1209 Easy CD Creator is performing a test.\nAre you sure you want to cancel?
1210 %1-Could not be traced
1211 The following file could not be prepared because it could not be opened.
1212 The following file could not be prepared because a temporary file could not be opened.
1213 The following file could not be prepared because the file could not be read.
1214 The following file could not be prepared because a temporary file could not be written.
1215 %1-Could not be opened.
1216 %1-Copy failed as temp file could not be opened.
1217 %1-Copy failed as memory could not be allocated.
1218 %1-Copy failed as the file could not be read.
1219 %1-Copy failed as temp file could not be written.
1220 The CD cannot be recorded because the list of source files cannot be built.
1222 You have chosen to skip the current file. On the CD, Easy CD Creator creates an entry corresponding to the file and substitutes unusable data for the file's data. Do you still wish to skip the file?
1223 CD write completed. All the data could not be recorded.
1224 The CD could not be recorded because Easy CD Creator was unable to read its internal database.
1225 You have chosen not to record to the CD currently in the CD-Recorder.
1227 Please insert the CD "%1" into the CD-Recorder.
1236 Reading file %1 of %2
1237 The following file could not be prepared because memory could not be allocated for the read buffer.
1239 Are you sure you want to stop generating the CD file system?
1242 Processing %1
1246 There is not enough free space in your TEMP directory to write all files in a single data track.
1247 %1- File size changed.
1248 There is not enough free space on your TEMP drive to create the CD. Please increase the amount of free space and try again.
1249 All Files (*.*) | *.* ||
1253 The files in the CD Layout cannot fit on a single CD. Please remove some files from the CD Layout and try again.
1254 The files in the CD Layout cannot fit on the CD. Please remove some files from the CD Layout and try again.
1255 Copy #%1 completed successfully.
1257 CD creation was successful. Please insert a blank CD for the next copy
1258 CD creation was successful. Please insert a blank CD for the next copy.
1260 Please insert the CD from which you wish to import the file system into the CD-Recorder.
1261 The CD in the CD-Recorder is not blank. Would you like to add a new volume to it?
1262 Unable to read the Table of Contents from the CD in the CD-Recorder.
1266 %1-Size changed.
1267 The CD must contain at least 1 free track and 7060 free blocks.
1268 Are you sure you want to stop validating the layout?
1269 The following file could not be opened because the path or file does not exist or the drive is not ready.
1270 The following file could not be opened because there are too many open files.
1271 The following file could not be opened because there is not enough memory.
1272 The following file could not be opened because access was denied. Please ensure that you have permission to read this file.
1273 The following file could not be opened because another program is using it. Please close the program that is using the file, if possible.
1274 [Microsoft Joliet]
1275 The following file could not be opened because error #%1 occurred.
1276 No supported CD-Recorders were detected on your system. Without a supported CD-Recorder, you cannot import a session from any CD.
1277 Please close some applications.
1278 The following file could not be opened because of read fault.
1279 Session %1 -
1280 [%1] [NO_LABEL]
1281 [%1] [%2]
1282 You need %1 of temp space to create the CD. Your temp directory has %2 of free space. Please make more temp space available on your hard disk and try again.
1283 The session has not been fully imported. Cancel the operation?
1284 %1 %2
1285 [%1]
1286 This session can not be imported.
1287 The CD in the CD-Recorder has been recorded in Mode %1. The mode that has been selected for the current CD Layout is Mode %2. Please use another CD or modify the data mode for the current CD Layout by choosing CD Layout Properties from the File menu.
1288 The CD currently in the recorder is a CD-I CD. Easy CD Creator does not support CD-I CD.
1289 The CD in the CD-Recorder has been recorded in Mode 2. Since your CD-Recorder does not support Mode 2, you will not be able to record additional data to the CD.
1290 Track Pregap
1291 - Import not supported
1292 [ISO-9660]
1293 %1 may only be written to a blank CD.\nPlease insert a blank CD into the CD-Recorder.
1294 The following file could not be prepared as the correct source CD was not inserted in the drive.
1295 Validating Layout
1296 Your CD-Recorder does not support Mode 2 recording. Therefore, you cannot import from Mode 2 CDs. Retry with a Mode 1 CD.
1297 Easy CD Creator does not support recording CD-I CDs. Therefore, you cannot import from CD-I CDs. Retry with a Mode 1 or a Mode 2 CD.
1298 Unable to read the CD ID. Reinsert the CD and try again.
1299 If you switch to Track-At-Once mode all previously set Audio Effects will be lost! Do you want to continue?
1301 An error occurred while writing to the temporary file "%1". CD creation will be canceled.
1302 An error occurred while creating the temporary file "%1". CD creation will be canceled.
1303 Easy CD Creator will now attempt to write the table of contents. Please insert the CD "%1" into the CD-Recorder.
1304 Easy CD Creator will now attempt to write the table of contents. Please insert the destination CD into the CD-Recorder.
1305 The next writable address on the CD could not be determined. Easy CD Creator will cancel the CD creation.
1307 %1-Could not be copied to track buffer.
1308 Select image file
1310 Placeholder for the image header
1311 The path you have specified for the image file is located on an invalid drive. Please select a new path.
1312 The path you have selected for the image file is located on a read-only disk. Please select a different disk.
1313 The path you have selected for the image file is located on a RAM disk. Please select a new path.
1315 CD Creation Process - %1
1316 Duplicate
1317 [Copy %1 of %2]
1318 CD Creation Setup - %1
1320 [%1]
1321 Block %1 of %2
1322 Writing file %1 of %2
1323 Copy using the CD image
1329 [Bootable Session]
1331 %I:%M:%S %p,%B %d, %Y
1333 %1 bytes
1334 %1 KB
1335 %1 MB
1336 %1 minutes
1339 Blocks to copy
1340 Attempt to fix the CD failed. You will not be able to add any more data to the CD.
1342 The CD in the CD-Recorder has an open session; but since it has been recorded using a data mode not supported by Easy CD Creator, it cannot be closed. No data can be added to the CD.
1355 To create a CD image at the selected path, approximately %1 of free space is required on drive '%2'. Currently drive %2' does not have enough free space, therefore the CD image cannot be created.
1356 Not enough space to create a temporary CD image.
1357 CD Image Files (*.cif)|*.cif|
1358 cif
1359 The Registry information for Easy CD Creator's Installable File Systems is missing.\n\nPlease reinstall Easy CD Creator.\n
1360 The image file "%1" does not reside on a local fixed drive. The source drive, "%2", may not be able to supply data fast enough to write to a CD-Recorder. This could cause a buffer underrun and result in an unusable CD. Do you wish to continue?
1361 Buffer level
1363 ISO Image Files (*.iso)|*.iso|
1364 iso
1365 |
1367 Select a recorder to be used for importing a session, from the list below.
1370 CD Creation Process
1371 Image Creation Process - %1
1372 CD image
1373 The file, "%1" is not a valid CD image file.
1374 The contents of the image file "%1" cannot be read.
1376 %1 errors have been encountered. This is the maximum number of errors allowed. CD creation will be canceled.
1377 Test successful. Preparing to write to CD...
1378 Unrecognized session
1379 The currently selected session does not contain a recognizable file system. Please select another session.
1380 The file "%1" cannot be deleted. (error #%2)
1391 The current layout requires Mode 2 tracks with both Form 1 and Form 2 sectors within the same track. Your CD-Recorder is not capable of writing these tracks. Please use another CD-Recorder or modify the layout to avoid "mixed form" tracks.
1392 File system file : %1
1393 Track buffer file : %1
1395 The CD in the CD-Recorder does not contain a recognizable File System. Please insert another CD.
1396 You cannot write a "%1" session on a CD containing a "%2" session. Please insert another CD.
1397 Easy CD Creator cannot find a component that is needed to create the required CD Extra files. Please re-install Easy CD Creator and try again.
1398 An OLE error occurred when Easy CD Creator tried to communicate to one of its components. Please re-install Easy CD Creator.
1399 The current data track is less than 4 seconds long and cannot be recorded to the CD. CD creation will be canceled.
1400 Preparing to write the track...
1401 You cannot import a "%1" session with "%2" data in the CD Layout.
1402 CD creation completed. View error list for details.
1403 Image creation canceled.
1404 The CD image file "%1" could not be created.
1405 The CD image file "%1" could not be opened for reading.
1406 An attempt to write the track offsets to the CD image file "%1" failed. You may not be able to use this file for creating a CD.
1407 An attempt to close the CD image file "%1" failed.
1408 An attempt to write the custom headers to the CD image file "%1" failed.
1409 The current track could not be written to the CD image file "%1".
1410 The file "%1" could not be written to the CD image file "%2".
1411 The contents of the CD image file "%1" could not be read. A CD cannot be created using this file.
1413 The contents of the source CD cannot be read. This CD cannot be copied.
1414 The source drive is not capable of reading digital audio. The CD you are about to copy contains digital audio information. CD creation cannot proceed.
1415 The source drive is not capable of reading Mode 2 data. The CD you are about to copy contains Mode 2 data. CD creation cannot proceed.
1416 Easy CD Creator is unable to recognize the data mode in which the source CD has been recorded. This CD cannot be copied.
1417 Please insert the source CD into your drive.
1418 Please insert the CD "%1" into your drive.
1469 The real time file "%1" could not be added to the source list. Make sure the file has the proper format.
1471 The current track contains more than 100 form transitions. A CD image cannot handle more than 100 form transitions on a single track.
1472 A new RIFF chunk could not be created for the current track. The track cannot be written to the image file "%1".
1473 The current track contains more than 100 form transitions. Easy CD Creator cannot handle more than 100 form transitions on a single track. The CD cannot be copied.
1474 A CD image file maintains a list of form transitions for mode 2 files. An attempt to add an entry to this list failed. CD image "%1" cannot be created.
1476 The CD-Recorder does not support the inserted CD. Please retry with another CD from a different manufacturer. (Please contact the CD-Recorder manufacturer to obtain a list of supported media.)
1477 The CD that is currently in the CD-Recorder is not suitable for all the supported speeds. Adaptec Easy CD Creator needs to test your recorder at all the supported speeds. Please use a different CD.
1478 The CD-Recorder you have selected does not support creating a CD Extra CD.
1479 [UDF]
1480 Select Abstract Text File
1481 Select Bibliography Text File
1482 Select Copyright Text File
1483 File Folder
1484 The CD-Recorder you have selected only supports creating a CD Extra CD in Track-At-Once
1485 ;;
1486 Browse for File
1487 The CD could not be created in Disc-At-Once, please try again and choose Track-At-Once in the Setup dialog.
1488 Fail to launch Jewel Case Editor, please reinstall the Jewel Case Editor.
5555 Address
5556 http://www.adaptec.com
6001 An error occured while reading the CD. The session could not be imported.
6002 "%1" is not a valid volume label for this CD Layout. Would you like Easy CD Creator to correct it for you?
6003 There is already a file or directory named "%1" in "%2". Please enter a different name.
6004 The name "%1" is not a valid directory name for this CD Layout.
6005 The name "%1" is not a valid file name for this CD Layout.
6006 Already written to CD
6007 NEWDIR
6008 New Folder
6009 NEWFOLDER
6010 Faster Access
6011 Fastest Access
6020 KB
6022 The date and time of item "%1" is corrupt. Do you want to continue adding other items?
6024 Directory names can be at most 8 characters long. They must contain only the characters 'A' - 'Z', '0' - '9', and the underscore ('_').
6025 Directory names can be at most 8 characters long plus a maximum 3 character extension. The directory name may contain any characters valid for an MS-DOS directory name.
6026 Directory names must be at most 30 characters long. The directory name can use any characters valid in a Windows long file name, but can contain only one period ('.').
6027 Directory names must be at most 64 characters long. The directory name can use any characters valid in a Windows long file name, and can include multiple periods.
6028 File names must be at most 8 characters long plus a maximum 3 character extension. They must contain only the characters 'A' - 'Z', '0' - '9', and the underscore ('_').
6029 File names must be at most 8 characters long plus a maximum 3 character extension. The file name may contain any characters valid for an MS-DOS file name.
6030 File names must be at most 30 characters long. The file name can use any characters valid in a Windows long file name, but can contain only one period ('.').
6031 File names must be at most 64 characters long. The file name can use any characters valid in a Windows long file name, and can include multiple periods.
6042 Name
6043 Size
6044 Type
6045 Modified
6046 Remarks
6047 Are you sure you want to stop adding files to the CD Layout?
6048 \nFrom:
6049 File
6055 CD Extra system file
6056 Locked file
6058 "%1" cannot be moved because it is locked.
6059 "%1" cannot be copied because it is locked.
6060 "%1" cannot be renamed because it is locked.
6061 "%1" cannot be removed because it is locked.
6062 "%1" cannot be replaced because it is locked.
6065 Folders
6066 Files
6067 File Properties
6068 Directory Properties
6069 Importing, please wait...
6070 Directory names may be either 254 single byte or 127 dual byte Unicode characters in length. The directory name can use any characters valid in a Windows long file name, and can include multiple periods.
6071 File names may be either 254 single byte or 127 dual byte Unicode characters in length. The file name can use any characters valid in a Windows long file name, and can include multiple periods.
6072 Pure UDF
6073 UDF Bridge
6074 DVD-Video
6075 DVD Zone
6076 ISO9660
6077 Joliet
6145 DAO
6146 TAO
6147 Cross Fade
6148 Fade Out
6149 Fade In
6150 Name
6151 Artist
6152 Type
6153 Emph
6154 Prot
6155 Yes
6156 No
6158 Artist:
6159 Title:
6160 New Artist
6161 New Title
6162 From
6163 Duration
6164 Pause
6165 ISRC
6166 Effects
6167 Number
6168 Start
6169 End
6170 Track %02d
6171 Audio Track Properties
6172 Audio CD Properties
6173 Properties
6174 Used Space:
6175 Used Space (Time):
7630 Track
7648 &Details >>
7649 No &Details
7650 Closing session, please wait...
7651 Closing CD
7652 Analyzing session, please wait...
7653 File system generation
7654 Copying files
7655 Writing track
7656 Prepare audio data
7657 Copying files and audio data
7658 Prepare data
7659 The current CD contains data that was created by Adaptec DirectCD. Please use Adaptec DirectCD to read and write to the CD.\n\n
7660 Verify files
7661 The CD has been created in a way that you can add additional music tracks to it. The CD is not playable on your home or car stereo CD player until you finalize the session. Click Close Session to finalize the CD now.
7662 If you want to create customized labels and inserts for your CDs, click the Jewel Case button to start Jewel Case Creator.
7663 Error: %1
7664 File %1 of %2
7665 Easy CD Creator Engine initialization has failed : %1
7666 (Could not create the Engine)
7667 (Could not Inizialize the Engine)
7668 (could not load CDR4)
7669 (could not load ACMWrapper)
7670 (Cold not initialize the devices)
7671 An error occurred while scanning the track "%1"
7672 CD not verified
8064 %1 KB/sec.
10013 The file "%1" specified in the Bibliography field of the CD Properties does not exist. Do you wish to continue?
10014 The file "%1" specified in the Abstract field of the CD Properties does not exist. Do you wish to continue?
10015 The file "%1" specified in the Copyright field of the CD Properties does not exist. Do you wish to continue?
10016 The file "%1" specified in the Publisher Name field of the CD Properties does not exist. Do you wish to continue?
10017 The file "%1" specified in the Prepared By field of the CD Properties does not exist. Do you wish to continue?
10028 The complete path for the file "%1" is longer than 255 characters. CD creation cannot continue.
10029 You have attempted to import a session with a block size that is not 2048 bytes. This capability is not supported.
10032 The operation cannot be completed because the file "%1" is too large to fit on one track. Increase the amount of usable temp space and try again.
10036 An error was encountered accessing drive %1:. The drive is either not ready or not supported. (Only 1.2MB, 1.44MB and 2.88MB floppies are supported)
10037 An error was encountered creating the boot image from drive %1:. Either the boot image could not be written to the temp directory or the floppy could not be read.
10038 Invalid date.
10039 Invalid time.
10041 Reading boot information, please wait...
11000 The automation object has a bad file pointer. Please ensure the user did not activate CD-Creator and destroy the corresponding file non-programatically.
11001 The Automation directory is invalid. Please ensure the user did not dynamically remove the directory from the CD-Creator interface.
11002 The file name "%s" does not exist on the virtual file system. Please enter a valid file name.
11003 Cannot rename root. Select another directory and try again.
11004 The 'Device Locater', required to detect recorders is invalid. Please try to free up system resources and re-create your automatable 'Recorders' object.
11005 Bad recorder identifier. A valid recorder identifier is a zero based index into the number of recorders you have connected to your computer.
11006 The recorder lookup procedure failed. Please ensure there is at least a 'scsi1=' or 'nullDevice=' entry in the [Devices] section in the .ini file.
11007 The target device associated with this OLE object is invalid.
11008 Bad track identifier. The track identifier is a zero based index into the number of tracks on the CD currently mounted.
11009 Could not retrieve the table of contents. Please ensure the device associated with this OLE object is not a NULL device and that the recorder list is current.
11010 The input parameters are invalid. Please refer to the 'Automation' documentation.
11011 Buffer could not be allocated. Please free-up system resources and try again.
11012 Could not read requested sectors. Please ensure the sectors are valid.
11013 %d device errors occured while trying to read the requested sectors.
11014 The CD creation preferences have not been properly set. Please set the CD creation preferences and retry.
11015 The error id is invalid. The error id is a zero based index into the list of device errors.
11016 Zoom factor is out of range. Please enter an integer between %d and %d.
11017 Item not found.
11018 Invalid measuring unit.
11019 Unable to create object with specified font attributes. Check all paramter values and try again.
11020 Object ID already used by an existing object.
11021 Invalid number of selected item(s).
11022 Invalid object type.
11023 The automation object has a bad jewel view pointer.
11024 The automation object has a bad collection of jewel case objects.
11025 Bad jewel case object.
11026 Bad jewel case objects interface.
11027 Fail to retrieve the IDispatch pointer.
11028 The bitmap object could not be created. Verify that the specified path is correct and that the bitmap exists.
11029 Failed to create object. Make sure the object is entered in the system registry.
11030 Attempt to allocate memory failed. Please try to free up system resources and try again.
11031 Failed to retrieve dispatch interface.
11032 An unexpected error occured.
11033 An invalid parameter was detected. Please refer to the "Automation" documentation.
11034 Invalid number of selected tracks. Merging requires two or more tracks to be selected.
11035 The automation object has a bad view pointer.
11036 The automation object has a bad track description pointer. Please ensure the user did not activate CD-Creator and destroy the corresponding track non-programatically.
11037 Non-Audio Track. Please make sure you are adding an audio track.
11038 Bad CD signature. Please make sure the CD has a valid signature.
11039 Artist name and Title CD missing. Please make sure the CD has a non-empty artist name and Title CD.
11040 Cannot create a CD from an empty CD Layout. Please add information (files or audio tracks) to the CD Layout and try again.
11041 The priority specified is invalid. Consult the Automation documentation for possible valid priorities.
11042 The internal database is invalid. Delete this automation object and attempt to re-create it.
11043 Invalid priority index. Please select a valid index.
11044 The session descriptor for this object is bad. Delete this object and try to re-create it. If the problem persists, consult the automation documentation.
11045 An invalid file system type was requested. You may iterate through valid file system types by using the "ItemByID" function.
11046 An invalid filesystem id was specified. The filesystem id is a zero based index into the number of filesystems installed.
11047 The automation object contains an invalid filesystem. Delete this object and try again. If the problem persists, consult the automation documentation.
11048 Error initializing application. Try freeing up one or more applications and re-try.
11049 Cannot create a CD image. Please ensure that your layout is not blank.
11050 Cannot obtain the parent of the root directory. Please select another directory and retry.
14002 New Priority
14004 Priority Properties
14006 Number
14007 Name
14008 Size
14009 Modified
14010 From
14011 The CD in your CD-Recorder is a CD-RW (rewritable) CD.\n\nCD-RW CDs may not be played on home or car stereos.
14012 File Subgroup %d
14013 The name "%s" is already used for another priority level. Please use a different name.
14014 The CD in your CD-Recorder already contains tracks in a closed session.\nIf you add more tracks to this CD, they will be recorded in an other session, but the CD may not be played on home or car stereos.
14015 You need %1 of temp space to back up the track. Your temp directory has %2 of usable space. Please make more temp space available. Click Retry to increase the temp space limit.
14016 You need %1 of temp space to back up the track. Your temp directory has %2 of usable space. Please make more temp space available.
14017 Block Number
14020 The CD in your CD-Recorder is a CD-RW (rewritable) CD.\n You are creating a CD that is readable by multiread CD-ROM drives only.
20004 Recent Find List
20005 Find%d
20007 Priority
20100 Name && Location
20105 Searching
20106 %d file(s) found
32770 Display and edit properties of the selected track.\nTrack Properties
32772 Validate all the file entries in the layout\nValidate
32774 Displays the properties of the selected items.\nProperties
32775 Views.\nViews
32776 Displays and edits the properties of the CD Layout.\nCD Layout Properties
32777 Copy the CD Layout to CD.\nCreate CD
32779 Copy the CD Layout to an image file.\nCD Image
32781 Create a CD from an image file.\nCD from image
32782 Remove one or more tracks from the CD Layout\nRemove
32783 Show or hide the CD Info Bar\nView CD Info Bar
32785 Display help for clicked on buttons, menus and windows\nHelp\nWhat is...
32788 Shows or hides the Address toolbar\nToggle Address ToolBar
32790 Shows or hides text labels on the toolbar\nToggle Text Labels
32793 Views the audio tracks you are writing to the CD\nAudio CD Layout
32794 Views the data files you are writing to the CD\nData CD Layout
32795 Application Settings\nPreferences
32796 Merges audio from more than one track into a single track.\nMerge
32797 Splits audio source material from a single track into two tracks.\nSplit
32798 Extracts the selected audio track(s) from CD to file(s)\nExtract
32799 Edits pre-recorded audio information using a WAV editor.\nEdit
32800 Previews the selected track with its audio effects\nPreview
32801 Performs all Easy CD Creator system tests\nSystem Tests
32802 Views the order in which data files are written to the CD\nFile Ordering
32803 Renames the selected audio track
32804 Overtime by 88:88
32805 888.8 MB required.
32807 Copy the CD Layout to an image file.
32808 Create a CD from an image file.
32810 Sets the duration of the pause for Disc-At-Once between this track and the next one.
32811 Pause in seconds:
32814 Adaptec on the Web\nAdaptec on the Web\nWeb
44000 Shows the number of folders and files in the layout
44001 Shows the number of audio tracks in the layout
44002 Shows the number of audio tracks and data folders and files in the layout
44003 Shows the amout of data in the layout
44004 Shows the amount of time in the layout
44005 Shows the amount of data and time in the layout
44006 Double click to change settings
44007 Double click to change settings
44008 Double click to change settings
44014 Sort items by name.\nSort by Name
44015 Sort items by type.\nSort by Type
44016 Sort items by size, from smallest to largest.\nSort by Size
44017 Sort items by date, from oldest to most recent.\nSort by Date
44018 Sort items by their priority on the CD\nSort by Priority
44019 Create a new folder on the CD Layout.
44022 Rename the selected item in the CD Layout.
44024 Remove files or directories from the CD Layout.\nRemove
44026 For faster access, tag the files you are recording to CD
44048 Arrange the icons automatically.
44052 Show or hide the Windows Explorer on the top part of the view.\nExplorer
44053 Show the Windows Explorer on the top part of the view.\nExplorer
44054 Hide the Windows Explorer.\nHide Windows Explorer
44055 Move up one level.\nUp
44056 Adjust the split bar between the directory and file list.
44057 Adjust the split bar between the directory and file list.
44058 Adjust the split bar between the desktop and CD Layout.
44059 Refresh item information.\nRefresh
44082 Show the CD contents
44084 View and edit CD Layout properties.\nCD Layout Properties
44089 Find files from the data layout.\nFind Files
44096 Import previously recorded session.\nImport Session
44097 Erase the CD.\nErase
44098 Eject the CD from the CD-Recorder.\nEject
44099 Show the properties of a CD drive\nCD Drive Properties
44100 Go to the Frequently Asked Questions Web Site\nFAQ on the Internet\nFAQ
44101 New\nNew
44102 Create a new Data CD Layout.\nNew Data CD
44103 Create a new CD Extra Layout.\nNew CD Extra
44104 Create a new Mixed-Mode CD Layout.\nNew Mixed-Mode CD
44105 Create a new Audio CD Layout.\nNew Audio CD
44110 Duplicates the selected CD.\nCD copy
44120 Shows or hides the Explorer bar.\nExplorer Bar
44124 Hides the All Folders bar.\nHide All Folders
44127 Creates a new bootable CD Layout.\nNew bootable CD
44136 View/Edit the effects of the audio tracks on the CD Layout.\nAudio Effects
44137 View/Edit the file ordering on the CD Layout.\nFile Ordering
44138 Hide the file ordering view and show CD layout\nHide File Ordering\nHide Order.
44139 Shows/Hides Easy CD Creator's CD Guide.\nCD Guide
44140 Adds Fade In to the selected audio track(s).\nFade In
44141 Adds Fade Out to the selected audio track(s).\nFade Out
44142 Adds cross fade between the selected audio track(s) and the next one(s).\nCross Fade \nCFade
44143 Trims the silence at the end of the selected audio track(s).\nTrim
44145 Adds selected item(s) to the CD Layout\nAdd Selected\nAdd
44146 Shows all files - data and audio in the explorer pane.\nShow All Files
44147 Shows audio files only - CDDA traks, WAV, and MP3 files in the explorer pane.\nShow Audio Files
44148 Shows CDDA tracks only in the explorer pane.\nShow Audio Tracks
44149 Sorts items by their number.\nSort by Number
44151 Edit the effects of the audio tracks in the CD Layout.\nEdit Audio Effects
44152 Play the selected track\nPlay
44153 Changes to 'Disc-At-Once' CD recording method.
44154 Changes to 'Track-At-Once' CD recording method.
44156 Some prompt for Adaptec on the Web
44160 Open this URL
44161 Open this URL
44162 Open this URL
44163 Open this URL
44164 Open this URL
44165 Open this URL
44166 Open this URL
44167 Open this URL
44168 Open this URL
44169 Open this URL
44170 Open this URL
44171 Open this URL
44172 Open this URL
44173 Open this URL
44174 Open this URL
44175 Open this URL
44176 Open this URL
44190 Do we really want this?
44207 Open the CDDB Website\nCDDB
48003 Change the file ordering.\nRe-order Files
48004 Add new priorities to the CD Layout.\nNew Priority
48005 Delete priorities from the CD Layout.\nDelete Priority
48006 View and edit properties of priorities in the layout.\nProperties
48009 Retrieve track titles from the Internet\nInternet Refresh\nInternet
57344 Easy CD Creator
57345 Press F1 for Help.
57346 Select an object for Help.
57361 You have attempted to play one or more tracks from an open CD session. These tracks are not playable until the session is closed.
57362 CD Player Error
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the active document\nPrint
57609 Display full pages\nPrint Preview
57610 Update the container to show any changes\nUpdate
57611 Save a copy of the active document with a new name\nSave Copy
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and place it on the Clipboard\nCopy
57635 Cut the selection and place it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert Clipboard contents\nPaste
57638 Insert Clipboard contents and a link to its source\nPaste Link
57639 Insert Clipboard contents with options\nPaste Special
57640 Repeat the last action\nRepeat
57641 Replace specific text with new text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57666 List Help topics.\nHelp Topics
57667 List Help topics\nHelp Topics\nHelp
57668 Display instructions on how to use Help\nHelp
57669 Display help for clicked on buttons, menus and windows\nHel\nWhat is...
57670 Display help for current task or command\nHelp
57680 Proceed to the next window pane\nNext Pane
57681 Return to the previous window pane\nPrevious Pane
57856 Insert new embedded object\nNew Object
57857 Edit linked objects\nEdit Links
57858 Convert object to different type\nConvert Object
57872 Activate embedded or linked object
57873 Activate embedded or linked object
57874 Activate embedded or linked object
57875 Activate embedded or linked object
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Shows or hides the toolbar\nToggle ToolBar
59393 Shows or hides the status bar\nToggle StatusBar
59408 Display items by using small icons.\nSmall Icons
59409 Display items by using large icons.\nLarge Icons
59410 Display items in a list.\nList
59411 Display information about each window item.\nDetails
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
61202 Restores the window to normal size
61203 Activates Task List
61205 Software, musical compositions, artwork, photographs, audiovisual works,television and film clips, textual material, some collections of data and many other types of works are protected by international copyright. Unauthorized copying of those works in any manner may violate the rights of the owner of the copyright in those works and may expose you to civil and criminal penalties.You may not use the Easy CD Creator product to violate the copyright rights of others. Adaptec does not authorize you to use the Easy CD Creator product and does not license or sell the product to you for purposes of violating the copyright rights of others.
61206 Adaptec Easy CD Creator is protected by copyright law and international treaties.Unauthorized reproduction or distribution of this program, or any portion of it, may result in severe civil and criminal penalties, and will be prosecuted to the maximum extent possible under law.
61207 This program is unable to use your CD-Recorder because it is currently being used by %s.
61209 creatr32.chm
61210 Save CD Layout changes to %1
61211 This program is unable to use your CD-Recorder(s) because another program is using it.
61212 Please insert a bootable floppy in the drive %c
61213 CD #%d
61445 Close print preview mode\nCancel Preview
61446 You cannot preview tracks that require you to change CDs during the preview. You can extract the tracks that are on other CDs to files and add those files to the CD Layout.
61447 An error has occurred while attempting to preview the layout.
