IDC_CHECK_CPUOPT="Disable support for &enhanced CPU instruction sets "
IDC_TEXT_TEXEL_ALIGNMENT="&Texel Alignment"
IDC_TEXT_TEXEL_DESC="This allows you to position the texel origin between the upper left corner and center of the texel. "
IDC_TEXT_VALUE="Value:"
IDC_ST_TEXEL_VALUE="7"
IDC_TEXT_UPPER_LEFT="Upper Left Corner"
IDC_TEXT_CENTER="Center"
IDC_ST_TEXHEAP_C="PCI Te&xture Memory Size"
IDC_ST_TEXHEAP_A="Use up to"
IDC_ST_TEXHEAP_B="MB of system memory for textures."
IDC_CHECK_VSYNC="Disable wait for &VBlank"
IDC_ST_VSYNC_A="Render no &more than"
IDC_ST_VSYNC_B="frame(s) ahead."
IDOK="&Close"
IDCANCEL="Cancel"
IDC_RESTORE="&Restore Defaults"
[IDD_OTHER]
IDC_TEXT_MONITOR_TIMING="&Monitor Timing"
IDC_TEXT_SELECT_TIMING="Select the proper timing mode for your monitor."
IDC_RADIO_AUTODETECT="Auto-Detect (let Windows determine the proper mode)"
IDC_RADIO_GTF="General Timing Formula (GTF)"
IDC_RADIO_DMT="Discrete Monitor Timings (DMT)"
IDC_TEXT_DRIVER_OPTION="Display Driver Options"
IDC_CHECK_CURCACHE="Disable &cursor caching"
IDC_CHECK_STRETCHBLT="Do not &filter stretched bitmap images"
IDC_CHECK_HWCURVE="Disable &hardware accelerated drawing of curves"
IDC_RESTORE="&Restore Defaults"
IDC_TEXT_WAIT4VSYNC="&Wait for Vsync"
IDC_WAIT4VSYNC="Enable Wait for Vsync"
IDC_TEXT_WAIT4VSYNC_DESC="Disable for higher 3D performance.\n(May cause lower visual quality, not recommended.)"
[IDD_SAVESETTINGS]
IDS_SAVESETTINGS="Save Settings"
IDC_TEXT_SAVESETTINGS="Save the current settings as:"
IDOK="OK"
IDCANCEL="Cancel"
[IDD_TVOUT]
IDS_TVOUT="TV Output"
IDC_TEXT_SCREEN_POS="Screen Positioning"
IDC_RESET="&Reset"
IDC_ST_BRIGHTNESS="&Brightness:"
IDC_ST_SATURATION="&Saturation:"
IDC_ST_FLICKER_CAPTION="Off"
IDC_TEXT_FILTER="&Flicker Filter:"
[IDD_FLATPANEL]
IDS_FALTPANEL="Flat Panel Display"
IDC_TEXT_DFP_OPTION="Digital Flat Panel Options"
IDC_TEXT_OPTION_DESC="These options allow you to determine how lower resolutions are positioned on your display."
IDC_RADIO_SCALED="Use &display adapter scaling"
IDC_RADIO_CENTERED="&Centered output"
IDC_RADIO_NATIVE="Use &monitor scaling"
IDC_CHECK_SURVIVE_REBOOT="Automatically a&pply these settings at startup "
IDC_ST_MAX_RES="Your flat panel display has a maximum resolution of ..."
[IDD_CONFIRM_MODE]
IDS_CONFIRM_MODE="Confirm Desktop Setting"
IDC_TEXT_CONFIRM_MODE="Your display mode has been switched. Do you want to keep this setting?"
IDNO="No"
IDYES="Yes"
; this is currently not used
[IDD_TVFORMAT]
IDS_TVFORMAT="Change TV Format"
IDC_STATIC01="&Regional Settings"
IDC_STATIC02="The proper TV format will be set based on your locale. Select your locale from the list below."
IDC_CHECK_DEFAULTFORMAT="&Make this format the power-up default"
IDOK="OK"
IDCANCEL="Cancel"
[IDD_DISPLAYDEVICE]
IDC_TEXT_SELECT_DEVICE="Select the output device on which to display Windows:"
IDC_RADIO_MONITOR="Analog &Monitor"
IDC_RADIO_FLATPANEL="&Digital Flat Panel"
IDC_RADIO_TV="&TV"
IDC_SETTINGS="Device &Settings..."
IDC_ST_FORMAT_A="F&ormat:"
IDC_ST_FORMAT_B="(Combination) N/PAL"
IDC_CHANGEFORMAT="&Change Format..."
IDC_ST_RES="TV r&esolution and color depth:"
; this is intentionally left blank
[IDD_HERCMAIN]
; this is intentionally left blank
[IDD_HERCMAIN_S]
[IDD_HERCMETER]
;IDS_HERCMETER="HercuMeter"
IDOK="&OK"
IDCANCEL="&Cancel"
IDC_DEFAULT_C="&Default"
IDUNDO="&Undo"
[IDD_LIABILITY]
;IDC_LIABILITY="Running your monitor beyond its maximum specification can cause extreme damage. Please consult your monitor Users Manual for maximum setting values. Hercules assumes no liability for misuse of the Hercules MoniTUNE utility."
IDS_DELETEPROMPT = "Are you sure you want to permanently delete the setting ""%s""?"
IDS_KILOBYTES = "%s KB"
IDS_MIP_BILINEAR = "Bilinear"
IDS_MIP_TRILINEAR = "Trilinear"
IDS_NOTEXT = "Please enter a name for this setting."
IDS_BEST_IQ = "Best image quality"
IDS_HIGH_IQ = "High image quality"
IDS_BLEND_IQ = "Blend"
IDS_HIGH_PERF = "High performance"
IDS_BEST_PERF = "Best performance"
IDS_VIDMEM = "%s MB %s"
IDS_BUS_PCI = "PCI"
IDS_BUS_AGP = "AGP"
IDS_MEM_SGRAM = "SGRAM"
IDS_MEM_SDRAM = "SDRAM"
IDS_MEM_DRAM = "DRAM"
IDS_UNAVAILABLE = "Unavailable"
IDS_2X1 = "2 x 1"
IDS_2X2 = "2 x 2"
IDS_3X2 = "3 x 2"
IDS_3X3 = "3 x 3"
IDS_4X2 = "4 x 2"
IDS_4X3 = "4 x 3"
IDS_4X4 = "4 x 4"
IDS_CH7003 = "Chrontel 7003"
IDS_BT868 = "Brooktree 868"
IDS_BT869 = "Brooktree 869"
IDS_NOTPRESENT = "Not present"
IDS_UNKNOWN = "Unknown"
IDS_TVFORMAT_NTSC = "NTSC"
IDS_TVFORMAT_PAL = "PAL"
IDS_TVOUT_ASK = "WARNING! You have specified a change to your TV configuration.\n\n Are you sure you wish to continue?"
IDS_TVOUT_WARN = "Windows has changed your TV settings. Do you want to keep this setting ?\n\nIf the display becomes garbled or unstable, simply wait and windows will restore the original settings."
IDS_TVOUT_RESTORE = "Windows has restored your TV's original configuration."
IDS_6X4X8 = "640 x 480 - 256 Color"
IDS_6X4X16 = "640 x 480 - High Color (16 bit)"
IDS_6X4X32 = "640 x 480 - True Color (32 bit)"
IDS_8X6X8 = "800 x 600 - 256 Color"
IDS_8X6X16 = "800 x 600 - High Color (16 bit)"
IDS_8X6X32 = "800 x 600 - True Color (32 bit)"
IDS_VXD_MON_ERR = "Severe error while getting monitor information.\nPlease reinstall your monitor with control panel."
IDS_MON_WARN = "Windows has changed your monitor settings. Do you want to keep this setting ?\n\nIf the display becomes garbled or unstable, simply wait and windows will restore the original settings."
IDS_MON_RESTORE = "Windows has restored your monitor's original configuration."
IDS_MON_WAIT = "Loading System Info, Please Wait ..."
IDS_LIABILITY = "Running your monitor beyond its maximum specification can cause extreme damage. Please consult your monitor Users Manual for maximum setting values. Hercules assumes no liability for misuse of the Hercules MoniTUNE utility."
IDS_CBO_ICON_LOGO = "NVidia Logo"
IDS_CBO_ICON_BLUE = "Monitor with Graphics Board (Blue)"
IDS_CBO_ICON_RED = "Monitor with Graphics Board (Red)"
IDS_AMD_K5 = "AMD K5"
IDS_AMD_K6 = "AMD K6"
IDS_AMD_K62 = "AMD K6-2 with 3DNow!(tm)"
IDS_AMD = "AMD"
IDS_INTEL = "Intel 386/486 Family"
IDS_INTEL_P5 = "Intel Pentium«"
IDS_INTEL_P55C = "Intel Pentium« with MMX(tm)"
IDS_INTEL_PPRO = "Intel PentiumPro«"
IDS_INTEL_PII = "Intel Celeron(tm), Pentium« II or Xeon(tm)"
IDS_INTEL_KNI = "Intel Pentium« III Family with SSE"
IDS_IDT_WINCHIP = "IDT WinChip/WinChip 2 Family"
IDS_CYRIX = "Cyrix"
IDS_CBO_RED = "Red"
IDS_CBO_GREEN = "Green"
IDS_CBO_BLUE = "Blue"
IDS_CBO_ALL = "All channels"
IDS_NVCHIP_TNT = "RIVA TNT"
IDS_NVCHIP_TNT2 = "RIVA TNT2"
IDS_NVCHIP_ULTRA = "TNT2 Ultra"
IDS_NVCHIP_VANTA = "Vanta"
IDS_NVCHIP_M64 = "Model 64"
IDS_FLATPANEL_INFO = "Your flat panel display has a maximum resolution of %u x %u."
IDS_LIABILITY_WARN = "WARNING !!!"
IDS_FLICKER_OFF = "Off"
IDS_FLICKER_LOW = "Low"
IDS_FLICKER_MODERATE = "Moderate"
IDS_FLICKER_HIGH = "High"
IDS_OUTDEVTITLE = "Output Device Settings"
IDS_CHANGEMODE = "Windows will now switch your desktop to the selected settings. This may take several seconds. If Windows does not reappear correctly, wait 15 seconds and your original settings will be restored."
IDS_POSITION_RESET = "The screen has been reset to its default position."
IDS_FLASHWARNING = "Windows will now set your hardware to match the settings you have specified. The screen may blank for several seconds during this process.\n\nTo avoid potential problems with the hardware, do not turn off your computer during"
IDS_STRING10048 = "United States of America"
IDS_STRING10049 = "Venezuela"
IDS_STRING10050 = "Brazil"
IDS_STRING10051 = "Paraguay"
IDS_STRING10052 = "Uruguay"
IDS_INFO = "Info"
IDS_GAMMA = "Color Adjustment"
IDS_D3D = "D3D Settings"
IDS_OPENGL = "OpenGL Settings"
IDS_OTHER = "Other Settings"
IDS_MONCONFG = "MoniTune"
IDS_SWITCH = "Output Devices Switching"
IDS_CONFIRM_MODE = "Confirm Desktop Setting"
IDS_D3DADV = "Direct3D - Advanced"
IDS_FLATPANEL = "Flat Panel Display"
IDS_SAVESETTINGS = "Save Settings"
IDS_TVOUT = "TVout Control"
IDS_CRASHWARNING = "HercuMeter found Windows was not properly shutdown last time, would you still want to reprogram :\n\nMemory Clock to %d MHz, and\nEngine Clock to %d MHz ?"