172 Bad CRC on downloaded file; was 0x%1, should be 0x%2
173 File length mismatch; was %1, should be %2
174 connection interrupted
175 socket invalid access
176 invalid socket
177 network unreachable
178 network reset
179 connection aborted by remote host
180 connection reset by remote host
181 Not connected
182 connection timed out
183 connection was refused
184 remote host is down
185 remote host unreachable
186 remote host disconnected the session
187 socket version not supported
188 The program has detected that it needs to be updated.\nThe program will download the latest version, and re-run itself now.
189 Error reading key %1\%2
190 Error writing key %1\%2
191 You must have VirusScan installed before running this program in this mode.
192 The program has updated itself.\nIt will now re-execute the updated version of itself with the original request.
193 %1 copying file %2.
194 There are no devices configured for Telephony use.\nYou should run the Modem Control Panel to add a modem driver.\n
195 Line Version unsupported by this program.
196 Error on Requested line.\n
197 Line is already in use by a non-TAPI application or by another TAPI Service Provider.
198 Error on Requested line (RC %1 from lineOpen).
199 Error on Requested line.\n
200 Requested line is already in use.\n
201 Out of Memory error, canceling action.\n
202 This line doesn't support partial dialing.\n
203 Call failed to be connected. Please verify that your modem is properly installed and configured and that your phone (line) is in proper working order.
204 You must select a phone number.
205 Unable to translate phone number %1.
206 Initializing modem and dialing phone number string "%1".
207 Out of memory at line %1 of file %2
208 Configuration information relating to Telephony Services appears to be corrupt.\nThis could be the first time you have used the Telephony services.\nPlease check the hardware configuration for you modem from the Windows Control Panel.
209 One of the components of the Telephony device driver is missing.\nUse the Control Panel to set up the driver properly.
210 You have two copies of the same Telephony driver installed.\nUse the Control Panel to remove one of the copies.
211 TAPI Operation Failed for unknown reasons.
212 A Telephony resource is temporarily unavaiable.\nThis could mean a short wait is necessary or that a non-TAPI application is using the line.
213 A change to the system configuration requires that all telephony applications relinquish their use of Telephony before any can progress. Some have not yet done so.
214 There are no devices configured for Telephony use. Please use the Windows Control panel to configure your modem.
215 Unknown error %1 while attempting to initialize the modem line.
216 Timeout error occured receiving data from server.
217 Error connecting to Async Proxy Server. The server may be temporarily down and/or unavailable. Please try the operation again later. The program may have been unloaded for maintenance purposes.
218 Request sent to server. Awaiting response...%1
219 Approximate Price in your currency
220 Server address not available
221 Transaction complete. Please click Next to proceed.
222 The line is busy. Please try the transaction again later.
223 No dial tone was detected. Please verify that your modem is properly installed and configured and that your phone line is in proper working order.
224 Connection closed due to inactivity for %1 minutes.
225 Invalid (modem) device ID. Devices are numbered starting at zero.
226 The modem connection has been lost.
227 Please select a country code. This will be used in making determinations about locating the nearest download server.\nThis value must be a number greater than 0.
228 Please enter your area code (also called "city code" outside North America).\nThis will be used in making determinations about locating the nearest download server.\nIf your country has no "city code", enter 0 in this field.
229 Call cancelled
230 Unable to find file %1.\nThis file contains a list of phone numbers of download servers the program will talk to.\nPlease re-install the program.
61440 Open
61441 Save As
61442 All Files (*.*)
61443 Untitled
61446 an unnamed file
61457 &Hide
61472 No error message is available.
61473 An unsupported operation was attempted.
61474 A required resource was unavailable.
61475 Out of memory.
61476 An unknown error has occurred.
61696 Invalid filename.
61697 Failed to open document.
61698 Failed to save document.
61699 Save changes to %1?
61700 Failed to create empty document.
61701 The file is too large to open.
61702 Could not start print job.
61703 Failed to launch help.
61704 Internal application error.
61705 Command failed.
61706 Insufficient memory to perform operation.
61707 System registry entries have been removed and the INI file (if any) was deleted.
61708 Not all of the system registry entries (or INI file) were removed.
61712 Please enter an integer.
61713 Please enter a number.
61714 Please enter an integer between %1 and %2.
61715 Please enter a number between %1 and %2.
61716 Please enter no more than %1 characters.
61717 Please select a button.
61718 Please enter an integer between 0 and 255.
61719 Please enter a positive integer.
61720 Please enter a date and/or time.
61721 Please enter a currency.
61728 Unexpected file format.
61729 %1\nCannot find this file.\nPlease verify that the correct path and file name are given.
61730 Destination disk drive is full.
61731 Unable to read from %1, it is opened by someone else.
61732 Unable to write to %1, it is read-only or opened by someone else.
61733 An unexpected error occurred while reading %1.
61734 An unexpected error occurred while writing %1.
61836 Unable to read write-only property.
61837 Unable to write read-only property.
61840 Unable to load mail system support.
61841 Mail system DLL is invalid.
61842 Send Mail failed to send message.
61856 No error occurred.
61857 An unknown error occurred while accessing %1.
61858 %1 was not found.
61859 %1 contains an invalid path.
61860 %1 could not be opened because there are too many open files.
61861 Access to %1 was denied.
61862 An invalid file handle was associated with %1.
61863 %1 could not be removed because it is the current directory.
61864 %1 could not be created because the directory is full.
61865 Seek failed on %1
61866 A hardware I/O error was reported while accessing %1.
61867 A sharing violation occurred while accessing %1.
61868 A locking violation occurred while accessing %1.
61869 Disk full while accessing %1.
61870 An attempt was made to access %1 past its end.
61872 No error occurred.
61873 An unknown error occurred while accessing %1.
61874 An attempt was made to write to the reading %1.
61875 An attempt was made to access %1 past its end.
61876 An attempt was made to read from the writing %1.
