home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1997 October
/
Chip_1997-10_cd.bin
/
ovladace
/
3com
/
3c589n
/
3c589n.exe
/
HELP
/
PATHWORK.TXT
< prev
next >
Wrap
Text File
|
1996-10-15
|
4KB
|
132 lines
3Com Corporation
NDIS 2.01 Drivers Installation Notes
DEC Pathworks for DOS/Windows v4.1 (below)
DEC Pathworks for DOS/Windows v5.1
DEC PATHWORKS for DOS/Windows v5.1
=====================================
These instructions describe how to install the 3Com NDIS driver
for the DEC Pathworks network operating system. These
instructions assume the DEC Pathworks for DOS/Windows
software has been installed on the hard drive from the
installation diskettes or CD ROM. Refer to the DEC manual for
installation instructions if the software has not been installed.
Refer to the DEC manual for templates and options.
Note: Please read the WFW.TXT file on the EtherDisk if
installing Pathworks with WFW v3.11.
Please run AutoLink on the EtherDisk if installing
Pathworks with Retail NetWare or Netware with ODI
drivers.
1. Go to the drive where Pathworks software is installed.
2. Change directory to PCAPP.
3. Execute PWSETUP.
4. Enter the directory where you want the software installed.
The default is C:\PW.
5. Choose CUSTOMIZE under the Select A Configuration Option
menu.
6. Choose a template in the Select a Workstation Template
menu.
7. Under the Customize: Modify Workstation Configuration menu,
put an X mark besides the Network Adapter Information
line.
8. Additional menus will appear, choose the appropriate
options for your network environment. Refer to the DEC
manual if there are questions regarding these menus.
9. Choose <Other Network Adapter> under the
Customize: Network Adapter Information menu.
10. If installing options other than Retail NetWare or Netware
with ODI drivers:
Type a:\mslanman.dos\drivers\ethernet\elpc3\elpc3.dos on
the Driver File: line.
Type a:\mslanman.dos\drivers\ethernet\elpc3\protocol.ini on
the PROTOCOL.INI Stub: line.
11. Verify that (l) Ethernet is marked and click on OK.
12. Click on OK under the Customize: Network Adapter
Information menu.
13. Additional menus will appear, follow the DEC instructions
to complete the installation.
14. Reboot the system.
DEC PATHWORKS for DOS/Windows v4.1
=====================================
To install DEC PATHWORKS version 4.1 on a DOS NDIS
workstation, DOS must be installed on the target workstation C:
drive, or you must have a bootable DOS floppy. Follow these
steps:
1. Insert the PATHWORKS DOS Client Setup diskette version 4.1
in your floppy drive.
2. Change to that drive and execute the NETSETUP.EXE program.
3. Follow the screens to select a Transport Protocol.
4. Insert the appropriate diskettes for the selection
you made in step 3.
5. Select your network adapter by typing ETHERNET.
6. Select the option (OTHER NDIS) adapters.
7. When prompted for the DRIVE:\PATH\FILENAME for the NDIS
driver, type:
A:\MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3\ELPC3.DOS
8. When prompted for the full DRIVE:\PATH of the PROTOCOL.INI
fragment, type:
A:\ MSLANMAN.DOS\DRIVERS\ETHERNET\ELPC3\PROTOCOL.INI
9. Follow the rest of the installation screens and the
procedure for writing the KEY DISK.
The NETSETUP program will build the PROTOCOL.INI file for
you and modify your startup files to use the adapter you
have selected.
NOTE: You must add the /N parameter to the line in the
STARTNET.BAT file. That starts the network scheduler.
For example:
%BOOT%\DECNET\sch /h /n
=========================================================
(%VER NDIS - DEC PATHWORKS v3.1c)