Chip 1997 April/Chip_1997-04_cd.bin/ovladace/novell/dwenu_n2/dwenu_n2.exe/LANDRV32/SMCPWR.LDI

Text File | 1996-06-13 | 11.0 KB | 326 lines

;
;       Novell NetWare Server Driver Description File for SMCPWR.LAN
;

VER: 2.10
SYN: 1.00

DR SMCPWR
{
    DES:    $DC21X4_1
    HELP:   $DC21X4_2
    PAR:    2.00
    PROD:   'PCI.1011.0002.0000.0000.2?',
            'PCI.1011.0009.10b8.2001.20',
            'PCI.1011.0014.0000.0000.1?',
            'PCI.1011.0009.0000.0000.11',
            'PCI.1011.0009.0000.0000.12',
            'PCI.1011.0009.0000.0000.2?',
            'PCI.1011.0019.0000.0000.1?'


    FILE:   SMCPWR.LAN
    TIME:   15

    PROMPT SLOT
    {
        DES:    $DC21X4_3
        HELP:   $DC21X4_4

        TYPE:   DECIMAL
        VAL:    1-65535
        DEF:    UNDEFINED
        OUT:    'SLOT=%s'
    }

    FRAME FrameSelect
    {
        CD:     $DC21X4_5
        CH:     $DC21X4_6
        CD:     $DC21X4_7
        CH:     $DC21X4_8
        CD:     $DC21X4_9
        CH:     $DC21X4_10
        CD:     $DC21X4_11
        CH:     $DC21X4_12
        DEF:    1,2,3,4
    }

    LIST Attachment OPTIONAL
    {
        HELP:      $DC21X4_13

        CD:     $DC21X4_14
        CH:     $DC21X4_15
        CD:     $DC21X4_16
        CH:     $DC21X4_17
        CD:     $DC21X4_18
        CH:     $DC21X4_19
        CD:     $DC21X4_20
        CH:     $DC21X4_21
        CD:     $DC21X4_22
        CH:     $DC21X4_23
        CD:     $DC21X4_24
        CH:     $DC21X4_25
        CD:     $DC21X4_26
        CH:     $DC21X4_27
        OUT:    '%s'
    }

    PROMPT NODE OPTIONAL
    {
        DES:    $DC21X4_28
        TYPE:   HEX
        VAL:    1-FFFFFFFFFFFE
        DEF:    UNDEFINED
        OUT:    'NODE=%s'
    }

    LIST Line_Speed OPTIONAL
    {
        DES:     $DC21X4_29
        HELP:     $DC21X4_30

        CD:     $DC21X4_31
        CH:     $DC21X4_32
        CD:     $DC21X4_33
        CH:     $DC21X4_34
        OUT:    'LINE_SPEED=%s'
    }

}




DLANG:    4
;English
    $DC21X4_1 = "SMCPWR PCI ethernet adapter"
    $DC21X4_2 = "This driver supports PCI bus devices"
    $DC21X4_3 = "Slot"
    $DC21X4_4 = "Select the slot number that corresponds to the physical
            expansion slot where the board or other device is installed."
    $DC21X4_5 = "802.3"
    $DC21X4_6 = "ethernet_802.3"
    $DC21X4_7 = "802.2"
    $DC21X4_8 = "ethernet_802.2"
    $DC21X4_9 = "SNAP"
    $DC21X4_10 = "ethernet_snap"
    $DC21X4_11 = "ethernet II"
    $DC21X4_12 = "ethernet_II"
    $DC21X4_13 = "Choose the connection/media type you would
                like to use, or NONE for preprogramed card's
                default. Please note that since this driver supports
            multiple PCI ethernet controllers some of the options
            given are non applicable to some controllers, i.e. 100MBPS
            is not applicable to DC21040 10MBPS devices."
    $DC21X4_14 = "Twisted Pair 10MBPS"
    $DC21X4_15 = "TP"
    $DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
    $DC21X4_17 = "TP_FULL_DUPLEX"
    $DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
    $DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
    $DC21X4_20 = "AUI - Thick Wire"
    $DC21X4_21 = "AUI"
    $DC21X4_22 = "BNC - Thin Wire"
    $DC21X4_23 = "BNC"
    $DC21X4_24 = "Fast Ethernet 100MBPS"
    $DC21X4_25 = "LINE_SPEED=100"
    $DC21X4_26 = "T4 Fast Ethernet 100MBPS"
    $DC21X4_27 = "T4"
    $DC21X4_28 = "Node Address"
    $DC21X4_29 = "Line Speed"
    $DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
            network interface) select the speed you would like
            the interface to work in. Otherwise leave NO VALUE
            as your selection."
    $DC21X4_31   = "10"
    $DC21X4_32   = "10"
    $DC21X4_33   = "100"
    $DC21X4_34   = "100"


LANG:    6
;French
    $DC21X4_1 = "SMCPWR PCI ethernet adapter"
    $DC21X4_2 = "This driver supports PCI bus devices"
    $DC21X4_3 = "Slot"
    $DC21X4_4 = "Select the slot number that corresponds to the physical
            expansion slot where the board or other device is installed."
    $DC21X4_5 = "802.3"
    $DC21X4_6 = "ethernet_802.3"
    $DC21X4_7 = "802.2"
    $DC21X4_8 = "ethernet_802.2"
    $DC21X4_9 = "SNAP"
    $DC21X4_10 = "ethernet_snap"
    $DC21X4_11 = "ethernet II"
    $DC21X4_12 = "ethernet_II"
    $DC21X4_13 = "Choose the connection/media type you would
                like to use, or NONE for preprogramed card's
                default. Please note that since this driver supports
            multiple PCI ethernet controllers some of the options
            given are non applicable to some controllers, i.e. 100MBPS
            is not applicable to DC21040 10MBPS devices."
    $DC21X4_14 = "Twisted Pair 10MBPS"
    $DC21X4_15 = "TP"
    $DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
    $DC21X4_17 = "TP_FULL_DUPLEX"
    $DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
    $DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
    $DC21X4_20 = "AUI - Thick Wire"
    $DC21X4_21 = "AUI"
    $DC21X4_22 = "BNC - Thin Wire"
    $DC21X4_23 = "BNC"
    $DC21X4_24 = "Fast Ethernet 100MBPS"
    $DC21X4_25 = "LINE_SPEED=100"
    $DC21X4_26 = "T4 Fast Ethernet 100MBPS"
    $DC21X4_27 = "T4"
    $DC21X4_28 = "Node Address"
    $DC21X4_29 = "Line Speed"
    $DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
            network interface) select the speed you would like
            the interface to work in. Otherwise leave NO VALUE
            as your selection."
    $DC21X4_31   = "10"
    $DC21X4_32   = "10"
    $DC21X4_33   = "100"
    $DC21X4_34   = "100"

LANG:    7
;German
    $DC21X4_1 = "SMCPWR PCI ethernet adapter"
    $DC21X4_2 = "This driver supports PCI bus devices"
    $DC21X4_3 = "Slot"
    $DC21X4_4 = "Select the slot number that corresponds to the physical
            expansion slot where the board or other device is installed."
    $DC21X4_5 = "802.3"
    $DC21X4_6 = "ethernet_802.3"
    $DC21X4_7 = "802.2"
    $DC21X4_8 = "ethernet_802.2"
    $DC21X4_9 = "SNAP"
    $DC21X4_10 = "ethernet_snap"
    $DC21X4_11 = "ethernet II"
    $DC21X4_12 = "ethernet_II"
    $DC21X4_13 = "Choose the connection/media type you would
                like to use, or NONE for preprogramed card's
                default. Please note that since this driver supports
            multiple PCI ethernet controllers some of the options
            given are non applicable to some controllers, i.e. 100MBPS
            is not applicable to DC21040 10MBPS devices."
    $DC21X4_14 = "Twisted Pair 10MBPS"
    $DC21X4_15 = "TP"
    $DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
    $DC21X4_17 = "TP_FULL_DUPLEX"
    $DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
    $DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
    $DC21X4_20 = "AUI - Thick Wire"
    $DC21X4_21 = "AUI"
    $DC21X4_22 = "BNC - Thin Wire"
    $DC21X4_23 = "BNC"
    $DC21X4_24 = "Fast Ethernet 100MBPS"
    $DC21X4_25 = "LINE_SPEED=100"
    $DC21X4_26 = "T4 Fast Ethernet 100MBPS"
    $DC21X4_27 = "T4"
    $DC21X4_28 = "Node Address"
    $DC21X4_29 = "Line Speed"
    $DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
            network interface) select the speed you would like
            the interface to work in. Otherwise leave NO VALUE
            as your selection."
    $DC21X4_31   = "10"
    $DC21X4_32   = "10"
    $DC21X4_33   = "100"
    $DC21X4_34   = "100"

LANG:    8
;Italian
    $DC21X4_1 = "SMCPWR PCI ethernet adapter"
    $DC21X4_2 = "This driver supports PCI bus devices"
    $DC21X4_3 = "Slot"
    $DC21X4_4 = "Select the slot number that corresponds to the physical
            expansion slot where the board or other device is installed."
    $DC21X4_5 = "802.3"
    $DC21X4_6 = "ethernet_802.3"
    $DC21X4_7 = "802.2"
    $DC21X4_8 = "ethernet_802.2"
    $DC21X4_9 = "SNAP"
    $DC21X4_10 = "ethernet_snap"
    $DC21X4_11 = "ethernet II"
    $DC21X4_12 = "ethernet_II"
    $DC21X4_13 = "Choose the connection/media type you would
                like to use, or NONE for preprogramed card's
                default. Please note that since this driver supports
            multiple PCI ethernet controllers some of the options
            given are non applicable to some controllers, i.e. 100MBPS
            is not applicable to DC21040 10MBPS devices."
    $DC21X4_14 = "Twisted Pair 10MBPS"
    $DC21X4_15 = "TP"
    $DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
    $DC21X4_17 = "TP_FULL_DUPLEX"
    $DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
    $DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
    $DC21X4_20 = "AUI - Thick Wire"
    $DC21X4_21 = "AUI"
    $DC21X4_22 = "BNC - Thin Wire"
    $DC21X4_23 = "BNC"
    $DC21X4_24 = "Fast Ethernet 100MBPS"
    $DC21X4_25 = "LINE_SPEED=100"
    $DC21X4_26 = "T4 Fast Ethernet 100MBPS"
    $DC21X4_27 = "T4"
    $DC21X4_28 = "Node Address"
    $DC21X4_29 = "Line Speed"
    $DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
            network interface) select the speed you would like
            the interface to work in. Otherwise leave NO VALUE
            as your selection."
    $DC21X4_31   = "10"
    $DC21X4_32   = "10"
    $DC21X4_33   = "100"
    $DC21X4_34   = "100"

LANG:    14
;Spanish
    $DC21X4_1 = "SMCPWR PCI ethernet adapter"
    $DC21X4_2 = "This driver supports PCI bus devices"
    $DC21X4_3 = "Slot"
    $DC21X4_4 = "Select the slot number that corresponds to the physical
            expansion slot where the board or other device is installed."
    $DC21X4_5 = "802.3"
    $DC21X4_6 = "ethernet_802.3"
    $DC21X4_7 = "802.2"
    $DC21X4_8 = "ethernet_802.2"
    $DC21X4_9 = "SNAP"
    $DC21X4_10 = "ethernet_snap"
    $DC21X4_11 = "ethernet II"
    $DC21X4_12 = "ethernet_II"
    $DC21X4_13 = "Choose the connection/media type you would
                like to use, or NONE for preprogramed card's
                default. Please note that since this driver supports
            multiple PCI ethernet controllers some of the options
            given are non applicable to some controllers, i.e. 100MBPS
            is not applicable to DC21040 10MBPS devices."
    $DC21X4_14 = "Twisted Pair 10MBPS"
    $DC21X4_15 = "TP"
    $DC21X4_16 = "Twisted pair - Full Duplex 10MBPS"
    $DC21X4_17 = "TP_FULL_DUPLEX"
    $DC21X4_18 = "Twisted pair - Full Duplex 100MBPS"
    $DC21X4_19 = "TP_FULL_DUPLEX LINE_SPEED=100"
    $DC21X4_20 = "AUI - Thick Wire"
    $DC21X4_21 = "AUI"
    $DC21X4_22 = "BNC - Thin Wire"
    $DC21X4_23 = "BNC"
    $DC21X4_24 = "Fast Ethernet 100MBPS"
    $DC21X4_25 = "LINE_SPEED=100"
    $DC21X4_26 = "T4 Fast Ethernet 100MBPS"
    $DC21X4_27 = "T4"
    $DC21X4_28 = "Node Address"
    $DC21X4_29 = "Line Speed"
    $DC21X4_30 = "If this is a multi-speed device (such as DC21140 based
            network interface) select the speed you would like
            the interface to work in. Otherwise leave NO VALUE
            as your selection."
    $DC21X4_31   = "10"
    $DC21X4_32   = "10"
    $DC21X4_33   = "100"
    $DC21X4_34   = "100"