home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip Hitware 6
/
Chip_Hitware_Vol_06.iso
/
chiphit6
/
tools
/
95sysbak
/
readme.tx_
/
readme.tx
Wrap
Text File
|
1996-06-14
|
2KB
|
50 lines
95 System Backup: Restore Readme
-----------------------------------------------
Important Information:
--------------------------------------
If you had to reinstall or are going to reinstall
Windows 95, then run the restore program after
Windows 95 is setup. NOTE: (If you run the Restore
program before reinstalling Widows 95, then Windows
95 setup will overwrite the important files and
your settings will be lost.)
Do Not Run the Recovery Program with Windows 95
running or from a dos windows, You must restart your
computer and boot from a Windows 95 Boot Disk and
then run Restore.
To Restore your computers important files:
----------------------------------------------------------
Restore from Floppy Disk:
1: First you want to boot your computer from a bootdisk,
2: Insert the Recovery Disk in the floppy disk drive and change
to the proper prompt. A:\
3: Type Restore at the prompt and press enter, The recovery
program will Start.
Example: A:\Restore {press Enter}
4: Reboot your computer.
Restore from Hard or Network Drive:
1: Exit out of Windows to a DOS prompt
2: Change to directory that you run the Backup to
3: Type Restore at the prompt and press enter, The recovery
program will Start.
4: Reboot your computer.
To report problems or have comments on the 95 System Backup program.
Email Us ONLY on America Online
MSSOLUTION@aol.com
Disclaimer:
Dynamic Software here by disclaims
any and all responsibility for use
of this program, and will not be held
liable for damage or loss of any kind.