116 A valid printer can not be found on this computer. Make sure the print spooler is running. If problem reoccurs, uninstall and reinstall the printer driver.
117 Error - Wrong Printer Connected
119 Communication Problem
124 To continue your print job, place a sheet of paper in the printer's manual feeder until the printer automatically feeds the paper in. Then click OK.
131 INITIALIZING COMMUNICATION WITH PRINTER
136 To remove the old cartridge:\nPull the handle of the print cartridge toward you until you hear a snap.
137 The printer connected is not a: %s.\n\n\nIncorrect device ID or cache format.
138 To install a new print cartridge:\nCarefully remove the sticker and transparent tape covering the copper print head from the cartridge.\nDo not touch or remove the copper contact area!
139 Close the printer's front cover, and click Finished to continue.
140 Lexmark Z22-Z32 Series
141 Remove the print cartridge by lifting it straight out of the printer.
142 If you are installing a COLOR cartridge, insert it into the LEFT cartridge carrier slot.\nIf you are installing a BLACK or PHOTO cartridge, insert it into the RIGHT cartridge carrier slot.
143 Push back firmly on the cartridge until it snaps securely into place.
144 The cartridge carrier automatically moves to the loading position.
200 PAUSED
201 ERROR
202 DELETING
203 SPOOLING
204 PRINTING
205 OFF-LINE
206 PAPER OUT
207 PRINTED
209 Your Print Cartridge Is Low On Ink
210 JOB DELETED
211 To purchase a new print cartridge, contact your authorized Lexmark dealer.\n\nPlease see the "Ordering Supplies" topic in the Online Guide for part number information.
212 Control Program -
213 OUT OF PAPER
214 WAITING FOR MANUAL PAPER
215 PAPER JAM
216 CARRIER STALLED
217 Fatal Error - File Missing
218 The file %s is required by this program and is missing. Please reinstall your printer driver.
219 BLACK
220 COLOR
221 PHOTO
222 &Change Cartridges...
223 &Install Cartridges...
224 BLACK High Yield
225 COLOR High Yield
226 BLACK p/n 17G0050
227 COLOR p/n 17G0060
228 PHOTO p/n 12A1990
229 CARTRIDGES INSTALLED INCORRECTLY
230 CARTRIDGE MISSING
231 BLACK High Yield p/n 16G0055
232 COLOR High Yield p/n 16G0065
233 Install Cartridges
234 You are halfway through your duplex print job! Follow these instructions to continue.
235 Pick up all the pages of your job by the shorter edge of the paper that is closest to you.
236 Flip the pages over by turning your wrist.
237 Place the pages back on the desktop.
238 Pick up all the pages of your job by the shorter edge of the paper that is closest to the printer.
239 Move the pages towards the input tray.\n\nNOTE: If you are using manual feed, you must load one sheet of paper at a time starting with the page that is on the top of the job you are holding.
240 Carefully load the paper in the input tray.\n\nClick the Finished button below when you are ready to continue printing.
241 Take hold of all the pages of your job by the shorter edge of the paper that is closest to you.
242 Lift the pages straight up.
243 Bidirectional communication with the printer failed. Choose Retry to try again or choose Cancel to automatically disable bidirectional support.
244 Control Program - Error communicating with printer
245 Your RAW print job is formatted for an old cartridge combination.\n\nSelect Cancel to cancel this print job and correct the cartridge information.\nSelect Retry to allow the job to print.
246 Warning - Cartridges have changed!
247 You should update your cartridge information at the earliest possible time.
248 You should now be able to successfully resend your print job.
249 Your cartridges changed. I'm going to ask what you installed.
250 Your print cartridges have changed and not been aligned.\n\nSelect Yes to align the cartridges before printing.\nSelect No print the job now.
251 I can not communicate with printer. Printer may be busy.\n\nSelect Retry when printer is available or Cancel to continue.\n\n\n(Alert Registration)
252 Printer is busy.
253 Saving the settings failed.\n\nSelect Retry to try again.\nSelect Cancel to not save your settings.
254 The printer is printing and you can not save settings at this time.\n\nSelect Retry when the printer is ready.\nSelect Cancel to not save your settings.
255 WARNING: BLACK PRINT ONLY
256 ERROR: DEVICE SERVICE REQUIRED - code %d
257 WARNING: UNABLE TO CAPTURE PRINTER ALERTS
258 , JOB DELETED
259 COVER OPEN
260 I can not communicate with printer. Printer may be busy.\n\nSelect Retry when printer is available or Cancel to continue.
261 Load Manual Paper
262 WARNING: If you choose not to restart Windows, you may lose bidirectional support. See README for details.
263 Windows Restart Required
265 One or Both of the Cartridges are Missing. Please install the cartridges.