3 Are you sure you want to permanently delete the setting "%s"?
4 %s KB
5 Bilinear
6 8-tap anisotropic
7 Please enter a name for this setting.
8 More Direct3D
10 Best image quality
11 High image quality
12 Blend
13 High performance
14 Best performance
15 %s MB
16 PCI
17 AGP
18 %u MHz
21 <Unavailable>
40 Not present
41 Unknown
42 NTSC
43 PAL
44 SECAM
45 HDTV
46 %s%%
47 %s%sā
65 Off
66 Low
67 Medium
68 High
69 Max
70 Off
71 Low
72 Moderate
73 High
75 Auto-Select
76 Always Off
77 Always On
78 AGP (PCI mode)
80 Chrontel
81 Chrontel 7000 Family
82 Chrontel 7003
83 Chrontel 7004
84 Chrontel 7005
85 Chrontel 7006
86 Chrontel 7007
87 Chrontel 7008
88 Conexant
89 Conexant Bt868
90 Conexant Bt869
91 Conexant CX25870
92 Conexant CX25871
93 Philips
94 Philips 7100 Family
95 Philips 7102
96 Philips 7103
97 Philips 7108
98 Philips 7109
99 Philips 7108B
100 Integrated
124 Chrontel 7009
125 Chrontel 7010
126 Integrated (MV)
127 Integrated
128 Chrontel 7011
129 Chrontel 7012
130 Red
131 Green
132 Blue
133 All channels
135 Use Block Transfer
136 Use Page Flip
137 Auto-Select
138 &Contrast
140 Philips 7108A
141 Philips 7109A
142 Philips 7104
143 Philips 7105
144 Conexant CX25872
145 Conexant CX25873
146 Conexant CX25874
147 Conexant CX25875
150 Your flat panel display has a maximum resolution of %u x %u.
151 Windows will now switch your desktop to the selected settings. This may take several seconds. If Windows does not reappear correctly, wait 15 seconds and your original settings will be restored.
152 The screen has been reset to its default position.
153 Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best. It is recommended you set your Screen Resolution to %ux%u.
200 (Combination) N/PAL
201 B/PAL
202 D/PAL
203 I/PAL
204 M(Japan)/NTSC
205 M/NTSC
206 M/PAL
207 N/PAL
208 G/PAL
209 H/PAL
210 K1/PAL
211 B,D,G,H,I/PAL
212 [PAL only]
213 SECAM
214 HDTV
300 Country/Region
301 Format
302 Windows will now set your hardware to match the settings you have specified. The screen may become blank for several seconds during this process.\n\nTo avoid potential problems with the hardware, do not turn off your computer during this process!
303 Description
304 Filename
305 Version
400 Auto-Select
401 Composite Video-Out
402 S-Video-Out
403 Direct3D Settings
404 OpenGL Settings
405 Overlay Controls
406 NVRotate
407 nView Display Mode
408 3D Antialiasing Settings
409 Desktop Utilities
411 Performance & Quality Settings
412 Additional Information
413 Refresh Rate Overrides
414 Device Selection
415 Colour Correction
416 Flat Panel Display
417 Clock Frequencies
418 TV Output
420 Off
421 2
422 3
423 4
424 5
440 3D Antialiasing Settings
441 Accuview Antialiasing Settings
500 Intel x86 Compatible
501 Intel Pentium(r)
502 Intel PentiumPro(r)
503 Intel Celeron(tm) or Xeon(tm)
504 Intel Celeron(tm)-A
505 Intel Pentium(r) II
506 Intel Pentium(r) III
507 Intel Pentium(r) 4
508 Intel Itanium(r)
509 AMD K5
510 AMD K6
511 AMD K6-2
512 AMD K6-3
513 AMD Athlon(tm)
514 AMD Duron(tm)
515 Cyrix MediaGX
516 Cyrix 6x86 Family
517 Cyrix MII Family
518 IDT WinChip C6
519 IDT WinChip 2
520 with MMX(tm)
521 with 3DNow!(tm)
522 with SSE
523 with SSE2
600 No DirectX installed
601 DirectX 1
602 DirectX 2
603 DirectX 3
604 DirectX 5
605 DirectX 6
606 DirectX 6.1
607 DirectX 7
610 DirectX 8.0
615 DirectX 8.1 or better
650 Unknown version of DirectX installed
1000 NVIDIA (Unknown)
1001 RIVA TNT
1002 Vanta
1003 TNT2 Model 64
1004 RIVA TNT2
1005 RIVA TNT2 Pro
1006 TNT2 Ultra
1007 GeForce 256
1008 GeForce DDR
1009 Quadro
1010 Aladdin TNT2
1011 GeForce2 MX/MX 400
1012 GeForce2 MX 100/200
1013 Quadro2 MXR/EX
1014 GeForce2 GTS
1015 GeForce2 Ultra
1016 GeForce2 Ti
1017 Quadro2 Pro
1018 GeForce2 Go
1020 GeForce3
1021 GeForce2 MX 100/200
1022 GeForce2 MX 100
1023 GeForce2 MX 200
1024 GeForce2 MX 400
1025 GeForce2 Integrated GPU
1026 Quadro DCC
1027 GeForce3 Ti 200
1028 GeForce3 Ti 500
1029 NV17
1030 NV17-1
1031 NV17-2
1032 NV17-3
1033 GeForce4 440 Go
1034 GeForce4 420 Go
1035 NV17M
1036 GeForce4 420 Go 32M
1037 GeForce4 440 Go 64M
1070 Fixed
1071 Grow Only
1072 Dynamic
1073 NVIDIA nForce
1074 220D SDRAM
1075 420D SDRAM
1076 220D DDR-RAM
1077 420D DDR-RAM
1078 with Dolby(R) Digital
1079 220
1080 420
1081 SDRAM
1082 DDR
1090 Additional OpenGL Properties
1091 Use Shutter Glasses
1092 Use Vertical Interlace monitor
1093 Use nView Clone mode
1094 Use on-board DIN connector
1095 Use on-board DIN connector on DAC 1
1096 Use blue-line-code for StereoGraphics(R) products
1114 The Full-Screen Video Mirror feature requires the nView mode to be set to Clone or Extended Desktop.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1115 Full-Screen Video Mirror
1116 The Full-Screen Video Mirror feature requires the nView mode to be set to Clone.\nClick OK below and navigate to the nView page to select Clone mode from the available nView display modes.
1117 Custo&m OpenGL Applications Setting:
1118 Application Settings
2000 NVIDIA (Unknown)
2001 RIVA TNT
2002 RIVA TNT2
2003 Vanta
2004 Vanta LT
2005 TNT2 Model 64
2006 RIVA TNT2 Pro
2007 TNT2 Ultra
2008 Aladdin TNT2
2009 GeForce 256
2010 GeForce DDR
2011 Quadro
2012 GeForce2 MX
2013 GeForce2 MX 100
2014 GeForce2 MX 200
2015 GeForce2 MX 100/200
2016 GeForce2 MX 400
2017 GeForce2 MX/MX 400
2018 GeForce2 Go
2019 Quadro2 MXR
2020 Quadro2 EX
2021 Quadro2 MXR/EX
2022 GeForce2 Integrated GPU
2023 GeForce2 GTS
2024 GeForce2 Ultra
2025 GeForce2 Ti
2026 GeForce2 Pro
2027 Quadro2 Pro
2028 Quadro2 Pro
2029 Quadro2 Go
2030 GeForce3
2031 GeForce3 Ti 200
2032 GeForce3 Ti 500
2033 Quadro DCC
2034 NV17
2035 NV17M
2036 GeForce4 440 Go
2037 GeForce4 420 Go
2038 GeForce4 420 Go 32M
2039 GeForce4 440 Go 64M
2040 GeForce4 MX 460
2041 GeForce4 MX 440
2042 GeForce4 MX 420
2043 Quadro4 500/550 XGL
2044 Quadro4 200 NVS
2045 Quadro4 400 NVS
2046 Quadro4 550 XGL
2047 GeForce4 Ti 4600
2048 GeForce4 Ti 4400
2049 GeForce4 Ti 4200
2050 Quadro4 900 XGL
2051 Quadro4 750 XGL
2052 Quadro4 700 XGL
2053 Quadro4 200/400 NVS
2054 Quadro4 500 GoGL
3804 DualView
3805 Standard (DualView)
5001 (Empty)
5002 Media Centre Properties
5003 About
5004 Adjust Display Properties
5005 Custom Direct3D Settings
5006 Custom Colour Settings
5007 NVIDIA Media Centre
5008 Restore Driver Defaults
5009 Restore Hardware Defaults
5010 Unable to start the applet. Please ensure that the software has been properly installed on your system.
5011 Media Centre
5012 Media Centre Properties
5013 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start a Direct3D application.
5014 The default Direct3D settings have been restored.
5015 The settings "%s" have been successfully applied.\n\nThey will take effect the next time you start an OpenGL application.
5016 The default OpenGL ICD settings have been restored.
5017 Custom OpenGL Settings
5018 Display %u
5019 Unable to find the file NVDESK32.DLL. The Desktop Manager features will be unavailable.
5020 Dynamic link failure in NVDESK32.DLL. The Desktop Manager features will be unavailable.
5021 Program Files
5022 Select an application
5023 The hot key you have selected is a single key without a CTRL, SHIFT, or ALT key used in combination. Only function keys can be assigned as single-key hot keys.\n\nPlease select a different hot key for this action.
5024 The hot key you have selected is a single key with the SHIFT key as a modifier. You may use a SHIFT + single-key combination only if the Single-Key is a function key.\n\nPlease select a different hot key for this action.
5025 The hot key you selected is already in use.\n\nPlease select a different hot key for this action.
5026 nView Desktop Manager
5028 The Desktop Manager is currently enabled, but the system must be\nrestarted to enable all Desktop Manager functionality.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5029 The Desktop Manager is currently disabled, but it will remain in your\ncomputer's memory until the system is restarted.\n\nDo you wish to restart your system now?\n\n(Select "Yes" to restart the system now, "No" to continue without restarting.)
5031 The settings "%s" have been successfully applied.
5032 The default colour settings have been restored.
5040 Desktop Manager Enabled
5042 Desktop Manager Disabled
5044 Desktop Manager Properties
5050 TV Output
5060 nView Properties
5061 nView Desktops
5062 nView
5063 Enable nView
5064 Disable nView
5065 Open nView properties panel
5066 nView Profiles
5070 Rotation Settings
5071 Rotation Enabled
5072 Rotation Disabled
5073 Rotate 0 degrees
5074 Rotate 90 degrees
5075 Rotate 180 degrees
5076 Rotate 270 degrees
5077 The rotation cannot be applied with the current resolution.
5078 Apply colour settings to all rotation angles
5090 Wizard Error - There was a problem accessing your registry -
8002 Color Correction
8006 Device Selection
8014 Vertical Flicker
8015 Horizontal Flicker
8016 Horizontal Luminance Flicker
8017 Horizontal Chrominance Filter
8018 Dynamic Flicker Filter
8030 Overlay Settings
8037 Disable
8038 Primary display
8039 Secondary display
8040 Auto-Select
8041 Track Overlay Aspect
8042 Source Aspect
8043 Full-Screen
8044 TV 4:3
8045 Anamorphic 16:9
8046 Video Overlay
8047 Video Mirror
8048 Both
8056 Changing your Video viewing preference will cause the displays to momentarily become blank on your system\nDo you want to continue?
8057 Run an application that plays video using Software Overlay to see the effect.
8073 Error initialising Personal Cinema Setup.
8074 Click OK to enable Personal Cinema TV Viewing and Video Capture feature.
8079 320 x 200\n400 x 300\n480 x 360\n512 x 384\n640 x 400\n640 x 480\n800 x 600\n848 x 480\n1024 x 768\n1152 x 864\n1280 x 720\n1280 x 768\n1280 x 960\n1280 x 1024\n1360 x 768\n1600 x 900\n1600 x 1024\n1600 x 1200\n1920 x 1080\n1920 x 1200\n1920 x 1440\n2048 x 1536\n
12001 Adjust Z-buffer depth to rendering depth if unequal
12002 Enable alternate depth buffering technique
12003 Display logo when running Direct3D applications
12004 Use DirectX 5 compatibility mode
12005 Force trilinear filtering
12050 Please note that full-scene antialiasing and the use of a unified back/depth buffer or window flipping are mutually exclusive.\n\nIf you want to enable the unified back/depth buffer or window flipping, full-scene antialiasing will be automatically disabled in the driver.
13000 Enable buffer region extension
13001 Allow the dual planes extension to use local video memory
13002 Use fast linear-mipmap-linear filtering
13003 Enable Anisotropic filtering
13004 Enable alternate depth buffering technique
13005 Disable support for enhanced CPU instruction sets
16000 Your hardware settings cannot be applied until you have tested them.\n\nSet the desired clock frequencies and then click the "Test New Settings" button to ensure that the hardware can support your selections.
16001 Your graphics hardware will now be tested at the new clock settings for several seconds.\n\nIf your computer stops responding during this time, turn your computer off and then back on.\nYour previous settings will be automatically restored.
16002 You must restart your computer before the new settings will take effect.\n\nDo you want to restart your computer now?
16004 %u x %u pixels
16005 %u Hz
16007 Analogue Display
16008 Digital Display
16009 TV
16010 A custom setting with this name already exists.\n\n Do you wish to overwrite it with the current setting?
16011 Windows was unable to change your display settings.\n\nPlease close the Display Properties, re-enter and try again.
16020 Device Settings
16021 Device Adjustments
17001 Default Monitor
17002 Plug and Play Monitor
17010 Display Properties
17011 Settings
17012 Reverting in %d seconds
17018 %d by %d pixels
17019 %d Hertz
17020 Windows will now apply your new display settings. This will take a few seconds, during which time your screen may flicker.\n\nIf your new settings are not applied correctly, your original display settings will be automatically restored in 15 seconds.
17021 Display Settings
17022 Custo&m OpenGL settings:
17026 First
17027 Second
17028 Third
17029 Fourth
17030 Fifth
17031 Sixth
17032 Seventh
17033 Eighth
17035 &Analogue Display:
17036 &Digital Display:
17037 &TV:
17038 &Analogue Display
17039 &Digital Display
17040 &TV
17041 TV Encoder Type:
17042 TV Codec Type:
17051 1x
17052 2x
17053 4x
17054 8x
17055 Use these control to select the degree of antialiasing to be used in OpenGL applications.
18079 Select the resolution that you want to use for games.
18080 Select the stereo refresh rate to use when stereo is enabled and the game is played at the resolution indicated by the Resolution slide bar.
18081 Test the display capability of your system at the selected resolution, bit depth, and refresh rate.
18082 The stereo refresh rate setting will be used when a game is played at the adjusted resolution and bit depth settings.
18083 Click to revert to the last saved panel settings.
18084 The set stereo refresh rate will be applied to games played at all resolutions at this colour bit depth.
18085 Select the colour bit depth that you want to use for games.
18086 Name of the executable or associated file used to identify this game/demo
18087 Take the current game configurations from the configured game version, and apply them to a new game. Select the new game from the file folder window.
18088 Undo the association of the game configuration to the new game.
18090 nView is enabled and currently set to Clone mode. Please disable Clone mode in order to run stereo.
18091 Stereo Enable Error
18092 Enable/Disable fast refresh rate switching
18093 Stereo Properties
18094 3D Laser Sight for first-person shooter games. The sight appears on the centre of screen with proper visual depth.
18095 Enter desired hot key for selected action.
18097 Select desired action from the list
18098 Click "Apply" to save your settings.
18099 Click "Restore Defaults" to restore default key binding.
19000 &Brightness
19001 &Contrast
19002 &Saturation
19003 &Flicker Filter
19004 The NVIDIA System Sentinel has determined that your NVIDIA based graphics adapter is operating on a severely limited power source.
19005 To protect your hardware from being damaged or causing a potential lockup, the GPU has lowered it's operating frequency to a level which will cause it to operate safely. You may notice decreased performance in some applications.
19006 The NVIDIA System Sentinel has determined that your NVIDIA based graphics adapter is operating at an elevated temperature.
19007 To protect your hardware from overheating and causing a potential lockup, the GPU has lowered it's operating frequency to a level which will cause it to operate safely. You may notice decreased performance in some applications.
19008 The NVIDIA System Sentinel has changed the operating characteristics of you nvidia based graphics adapter.
19009 To protect your computer from acting erratically or locking up, the performance vs. stability setting has been adjusted in favor of stability. You may notice decreased performance in some applications.
19010 %dā
19011 Performance Indicator
19012 Power Indicator
19013 Heat Indicator
19100 Toggle Stereo Default On
19101 Save Image
19102 Increase Separation
19103 Decrease Separation
19104 Increase Gamma
19105 Decrease Gamma
19106 Toggle Stereo Default On
19107 Cycle Frustum Adjustment
19108 Increase Screen Depth
19109 Decrease Screen Depth
19110 Increase Backplane
19111 Decrease Backplane
19112 Write Configuration
19113 Delete Configuration
19114 Increase Convergence
19115 Decrease Convergence
19116 Toggle Auto-Convergence
19117 Restore Default Convergence
19118 Suggest Settings
19119 Unsuggest Settings
20000 Desktop Manager
20001 Application Management
20002 Hot Keys
20003 Global Settings
20004 Executable files (*.exe)
20005 Zoom
20006 Pop-Ups
20032 <current desktop>
20033 its current screen
20034 the entire desktop
22000 Are you sure you want to clear all application management settings?
22001 Are you sure you wish to reset all global Desktop Manager settings and hot keys?
22002 Two or more of the hot keys you have specified are the same and will not function correctly.\n\nPlease resolve the problem by changing or disabling the appropriate hot keys.
22003 The desktop name you entered is not valid:\n\nThe backslash ('\') character is not permitted.
24000 &Desktop Manager\n&Maximize to current display\n&Send to other display\nMa&ximizes to single display\nStarts at &last-used position\nProgram starts on &display\nProgram starts on des&ktop\n(&default)\n(¤t desktop)\n&New...\n&1\n&2\n&3\n&4\n(&default desktop)\n(Desktop)
25000 Allow applications to control the antialiasing mode
25001 Manually select the antialiasing mode
25002 Off (no antialiasing)
25003 2x
25004 Quincunx Antialiasing(tm)
25005 4x
25006 4x, 9-tap Gaussian
25007 4xS (Direct3D only)
25008 Use these sliders to select the degree of antialiasing to be used in Direct3D and OpenGL applications.
25009 Texture Sharpening
25010 Save the current settings as
25011 OK
25012 Cancel
25013 Screen positioning
25014 Up
25015 Left
25016 Right
25017 Down
25018 &Reset
25019 &Contrast
25020 &Saturation
25021 Off
25022 &Flicker filter:
25023 Note: Various settings have been disabled because protected content is being displayed.
25025 Additional &Properties...
25026 NVIDIA on the &Internet >>
25027 Processor:
25028 %s
25029 Bus:
25030 BIOS:
25031 Memory:
25032 IRQ:
25033 TV Type:
25034 System Information
25035 System Processor:
25036 CPU
25037 Total Physical Memory:
25038 %s KB
25039 Free Physical Memory:
25040 %s KB
25041 DirectX Version:
25042 Unknown version of DirectX installed
25043 Driver Version Information
25044 Graph
25045 &Digital Vibrance:
25046 Medium
25047 Active Clou&r Channel:
25048 &Brightness
25049 &Contrast
25050 &Gamma:
25051 1.00
25052 Custo&m Colour Settings:
25053 &Save As...
25054 &Delete
25055 &Apply settings to all rotation angles
25056 Restore &Hardware Defaults
25057 Centering
25058 Click the icons on the desktop image to adjust the screen to the desired position.
25059 Note:\nOn certain monitors, the screen may go blank momentarily during adjustment.
25061 Digital Flat Panel Options
25062 These options allow you to determine how lower resolutions are displayed on your flat panel.
25063 Use &Display Adapter Scaling
25064 Use &Centered Output
25065 Use &Monitor Scaling
25066 Your flat panel display has a maximum resolution of ...
25067 &Regional Settings
25068 The proper TV format is based on your locale. Select your locale from the list below.
25069 &Make this format the power-up default
25070 Select the output device on which to display Windows:
25071 A&nalogue Display
25072 &Digital Display
25073 &TV
25074 Format:
25075 Change &format...
25076 Video &Output Format:
25077 Device Adj&ustments...
25078 0
25079 0
25080 0
25081 &Check here if you have a TV connected but it remains unselectable.
25082 &Performance and Compatibility Options
25083 Texture Anisotropic Setting :
25084 0
25085 x
25086 Mipmap Detail &Level:
25087 PCI Texture Memory Size
25088 &Use up to
25089 MB of system memory for textures in PCI mode.
25090 &Custom Direct3D settings:
25091 More Direct&3D...
25092 &Texel Alignment
25093 This slider lets you position the texel origin between the upper-left corner and the center of the texel.
25094 Value:
25095 7
25096 Upper-Left Corner
25097 Center
25098 Vertical Sync
25099 Vertical Sync &Mode:
25100 Render &no more than
25101 frame(s) ahead.
25102 &Performance and Compatibility Options
25103 Default &Colour Depth (for textures):
25104 &Buffer-Flipping Mode:
25105 &Vertical Sync:
25106 Anisotropic &Filtering:
25107 &Use up to
25108 MB of system memory for textures in PCI mode.
25109 Custo&m OpenGL Applications Setting:
25110 Enable &Overlay in OpenGL
25111 Enable &Stereo in OpenGL
25112 Stereo Display &Mode:
25113 S&wap eyes (L becomes R, R becomes L)
25114 Current AGP Settings
25115 Mainboard Chipset:
25116 Intel 440BX
25117 AGP Rate:
25118 PCI Mode
25119 Aperture Size:
25120 256 MB
25121 Side-Band Addressing:
25122 Enabled/Disabled
25123 &Manually select your AGP rate
25124 Note: Selecting the highest AGP rate ensures only that the highest rate supported by your mainboard chipset will be used.
25125 AGP &Rate
25126 PCI Mode
25127 Depth of Request &Queue
25128 Auto-Select
25129 Specify:
25130 Enable AGP &Fast Writes
25131 Enable &Write Combining
25132 Enable &2D Command Buffer Caching
25133 The display mode setting has exceeded the capabilities of the graphics hardware.\n\nPlease select a lower resolution, colour depth, or refresh rate for one of your displays. Click OK to continue.
25134 &Don't show me this message again
25135 &Details...
25136 The changes made to the Display Properties require that the system be restarted for the new settings to take effect.
25137 Before restarting, save any open documents and close all applications.
25138 I &will restart my computer later
25139 Note: Increasing the hardware clock frequencies beyond the manufacturer's recommended settings may cause system instability and possibly damage the hardware.\n\nUse caution when adjusting these settings.
25140 Allo&w clock frequency adjustments
25141 &Core Clock Frequency:
25142 &Memory Clock Frequency:
25143 &Test Settings
25144 A&utomatically apply these settings at startup
25145 Restart Now
25146 To ensure the proper operation of the clock frequency controls, your graphics hardware configuration must be examined before any adjustments can be made. This requires restarting your computer.
25147 Before continuing, save any open documents and close all applications. If you are using a third-party overclocking utility, disable it before restarting.
25148 Click 'Restart Now' to continue, or click 'Cancel' to return without restarting.
25149 After Windows has been restarted, return to the Clock Frequencies page to make the desired adjustments to the core and memory clock frequencies.
25150 Please wait...
25151 You have chosen to automatically set a clock speed at startup which varies from the hardware manufacturer's default settings.
25152 If these settings prevent Windows from starting properly or cause the system to become unstable, you can bypass the automatic clock setting and force the default hardware values by pressing and holding the CTRL key during startup.
25153 Note: To bypass the automatic clock setting on a computer connected to a network, hold down the CTRL key immediately after logging on to Windows.
25154 &Don't show this message again
25155 nView allows you to connect separate displays to a single graphics card.
25156 nView Modes
25157 &Standard (nView disabled)
25158 &Clone
25159 &Horizontal Span
25160 &Vertical Span
25161 &Display:
25162 &Make this the primary display
25163 Chip Type Text
25164 Detect Dis&plays
25165 D&evice Settings >>
25166 &Force detection of a monitor on the secondary connector
25167 Disable a&uto-panning on secondary device (viewport lock)
25173 &Hide modes that this monitor cannot display
25174 Unchecking this box allows you to set your display to modes that this monitor cannot display correctly. This may lead to an unusable display and/or damaged hardware.
25175 &Yes
25176 &No
25177 Your desktop has been reconfigured. Do you want to keep these settings?
25178 Reverting in 15 seconds.
25179 You have selected a non-optimal Screen Resolution setting for your LCD display panel. Selecting this resolution may result in fuzzy text and pictures.
25180 Unlike external computer monitors, LCD display panels have one particular Screen Resolution setting that looks best. It is recommended you set your Screen Resolution to %ux%u.
25181 The Control Panel has applied changes to which other pages on the property sheet may be sensitive. To ensure proper operation, the Display Settings property sheet will now be closed.
25182 Click OK to have the setting modified, or click Cancel to return with your original settings restored.
25183 Note that this change is required in order for the mode that you have selected to work correctly, and can be done automatically by following the instructions below.
25184 &Screen Resolution:
25185 res
25186 &Refresh Rate:
25187 &Apply
25188 &Display the Media Center icon in the taskbar
25189 Select taskbar &icon:
25190 The Desktop Manager provides enhanced nView multi-display functionality and helps you organize your applications for use with multiple displays and desktops.
25192 &Enable Desktop Manager
25193 Desktop Manager &Configuration...
25194 Enable Dualview (Treat multiple outputs on an NVIDIA GPU-based card as separate display devices).
25195 &Timing Modes
25196 Select the proper timing mode for your display:
25197 Auto-Detect (Windows determines the proper mode.)
25198 General Timing Formula (GTF)
25199 Discrete Monitor Timings (DMT)
25201 &Brightness:
25202 100%
25203 &Contrast:
25204 100%
25205 &Hue:
25206 0ā
25207 &Saturation:
25208 100%
25209 Enable Video &Overlay Zoom
25210 Select screen region to zoom
25211 Top-Left
25212 Top-Right
25213 Center
25214 Bottom-Left
25215 Bottom-Right
25216 &Zoom Control
25217 Out
25218 In
25219 &Check here if you are having problems with your TV tuner
25220 &Video Mirror Settings...
25221 Full-Screen Device
25222 Disable
25223 Primary display
25224 Secondary display
25225 Auto-Select
25226 Aspect &Ratio
25227 Track Overlay Aspect
25228 Source Aspect
25229 Full-Screen
25230 TV 4:3
25231 Anamorphic 16:9
25232 Enable Video &Mirror zoom
25233 &Track overlay zoom.
25234 Allo&w driver to select the full-screen mode
25235 Tr&ack overlay rotation
25236 Use this sliders to adjust your PowerMizer settings
25237 Maximum Power Savings
25238 Maximum Performance
25239 Frame Buffer Settings
25240 Frame Buffer &Mode:
25241 Frame Buffer Size:
25242 8 MB
25243 Frame Buffer Management Strategy:
25244 Conservative
25245 Aggressive
25246 &Enable rotation support
25247 Landscape (0 degree rotation)
25248 Portrait (90 degree rotation)
25249 Inverted Landscape (180 degree rotation)
25250 Inverted Portrait (270 degree rotation)
25251 <-
25252 ->
25253 Mouse Buttons
25254 Display the Media Center menu when clicking...
25255 The &primary mouse button
25256 The &secondary mouse button
25257 &Either the primary or the secondary button
25258 Confirmation
25259 By default, Media Center displays a confirmation message when a custom 3D setting is applied.
25260 &Do not display confirmation messages.
25261 3D Menus
25262 Display &menus with a 3D appearance.
25263 Copyright (c) 1998-2002 NVIDIA Corporation
25264 Total Physical Memory Available:
25265 Free Physical Memory:
25266 NVIDIA Taskbar Utility
25267 Windows needs to be restarted before the Desktop Manager can be launched. A restart is required only the first time that Desktop Manager is lauched after the software is installed.
25268 Before continuing, save any open documents and close all applications.
25269 Click 'Restart Now' to continue, or click 'Cancel' to return without restarting.
25270 The Control Panel must change the state of the 'Hide modes that this monitor cannot display' setting on the Monitor page of this display adapter.
25271 &Restore Defaults
25272 The 'Media Center' taskbar utility lets you conveniently access various features and presets you've configured in the Display Properties directly from the Windows taskbar.
25273 Desktop Colour Options
25274 Enable TV Viewing and Video Capture
25275 Restore non-Personal Cinema Setting
25276 Video Viewing Preference
25277 On TV
25278 On CRT
25279 Screen Size
25280 Aspect Ratio
25281 Full-Screen Video Mirroring Options
25282 The Personal Cinema device is not attached. Click OK to enable your Personal Cinema device and to switch your Primary display setting.
25290 Capabilities
25291 NVIDIA GPU :
25292 Actual :
25293 AGP &Rate
25294 Enable &Fast Writes (FW)
25295 Enable &Sideband Addressing (SBA)
25296 Enable &2D Command Buffer Caching
25297 &Depth of Request Queue
25298 Auto-Select
25299 Specify:
25300 &Test Configuration
25301 SBA
25302 FW
25303 AGP Disabled
25304 AGP %dX
25305 AGP %d.%d
25306 %s chipset :
25307 Max request queue depth: %d
25308 disabled
25309 Intel
25310 VIA
25311 AMD
25312 RCC
25313 Micron
25314 NVIDIA
25315 Unknown
25316 VESA BIOS Information
25317 Vendor:
25318 Product:
25319 Version:
25320 System Memory
25321 Available Physical Memory:
25322 Available Virtual Memory:
25323 Default
25324 Maximum Performance
25325 &Apply to desktop
25326 &Save As...
25327 &Delete
25328 &Restore Defaults
25329 &Performance
25330 Application
25331 Balanced
25332 Aggressive
25333 &Texture Quality
25334 Low
25335 Default
25336 High
25337 &Antialiasing
25338 Off
25339 2x
25340 Quincunx
25341 4x
25342 4x,9-tap Gaussian
25343 A&nisotropic Filtering
25344 Off
25345 1x
25346 2x
25347 4x
25348 8x
25349 AGP Settings
25350 Additional Information
25351 Performance & Quality Settings
25352 System Performance
25353 Multi-Display &Hardware Acceleration:
25354 Click 'Override refresh rates' to select refresh rate overrides to be used in Direct3D applications.
25355 Refresh Rate Overrides
25356 Applications &control refresh rate
25357 &Override refresh rates
25370 Temperature Settings
25371 GPU Core Temperature:
25372 Core Slowdown Threshold
25373 &Degrees:
25374 Ambient Temperature:
25375 Scale
25376 &Fahrenheit
25377 &Celsius
25378 Enable Heat Indicator &warning when threshold exceeded
25379 Display Core Temperature in system &tray area
25380 &Log Settings
25390
25391 Apply these settings at &startup.
25392 Adapter Information
25401 Balanced
25402 Current Power Source:
25403 Current Power Level:
25404 Current Battery Charge
25407 Battery
25408 AC Outlet
25409 Maximum Power Savings
25410 Maximum Performance
25420 Image Sharpening
25423 PowerMizer setting only affects 3D performance when running on battery.
25424 The gamma ramp has been changed outside of the control panel. Any modification here will erase those changes.
