home *** CD-ROM | disk | FTP | other *** search
- Emergency Disks
- Release Notes - 07/27/01
- Copyright (c) 2000-2001 Symantec Corporation
- All rights reserved
-
- Please read this document carefully; it contains important
- information about Emergency Disks.
-
- **********************************************************************
-
- Emergency disks allow you to start your computer in DOS. Use Emergency
- Disks to solve problems before you install.
-
- NOTE: It is always better to use Rescue Disks made on the problem
- machine if you have them. Rescue Disks contain machine-specific
- information and can solve problems easier than Emergency disks.
-
- Make Emergency Disks from the Support folder of the product CD. You
- will need several formatted 1.44 MB disks. You will need one disk for
- each .IMG file in this folder.
-
-
- **********************************************************************
-
- To make Emergency Disks
- =======================
- CAUTION: Perform the following procedure on a different computer from
- the one with the problem. Executing these steps might cause additional
- problems.
-
- 1. Insert the product CD into the CD-ROM drive.
- 2. Click Browse the CD.
- 3. Double-click the Support folder.
- 4. Double-click the Edisk folder.
- 5. Double-click Ned.exe
- 6. Follow the on-screen instructions.
-
- To use the Emergency Disks:
- ===========================
- 1. If your computer is running, click the Start button, select Shut
- Down, and then select the Shut Down option. When Windows has shut
- down, switch off your computer using the power switch.
-
- 2. Insert Emergency Disk 1 in your floppy drive, and then switch on
- your computer.
-
- 3. Follow the on-screen instructions.
-
- **********************************************************************
-
-