GameStar 2000 August/Gamestar_21_2000-08_cd1.bin/PROGRAMY/dvdgn375.zip/english.msg

Text File | 2000-07-06 | 5KB | 165 lines

#powerdvd

  Please read the PowerDVD information
  on the Player notes page.
#end
#softdvd
  The reset feature will only work with
  Zoran SoftDVD v2.125_9.01 and MGI SoftDVD MAX.

  You are also required to set the Windows region code
  prior to playing the disc.

  If you are using Windows 98 then erase the region key
  on the Windows tab.

  If you are using Windows 98 Second Edition, manually
  set the region, or use the reset button and let SoftDVD
  change the region for you.

  If you are using Windows 2000, read:
  http://www.inmatrix.com/win2000.html

  If the reset button below is not enabled, then your
  version of SoftDVD may not be supported, or a region
  has not been set yet.
#end
#jammin

  Support for the Jammin' Decoder is
  experimental at best, use at your own risk.
#end
#xingdvd

  Note, the Xing DVD Player under Windows 98
  requires that you change the Windows 98
  region code (see information).
#end
#win98
  Warning:
  A wise man would read http://faq.inmatrix.com
  before messing with the internal Windows region code.
#end
#windvd
  Note, the WinDVD region code is not automatically identified,
  if WinDVD is installed, just pick any region and press apply.
  A specific audio mode may not be available on your system.
#end
#hollywood

  The 4-Channel tweaking features may not work on drivers
  newer than v1.70.  SigmaDesigns disabled 4-Channels support
  due to licensing issues.

  For regional controls you need a program called
  Zone Selector.
#end
#varodvd

  This setting will only work on the newer VaroDVD
  versions and will not function on v1.20.

  VaroDVD support is still experimental, treat it as such.
#end
#ati
  Since the ATI & G400 DVD Players use the Cinemaster engine,
  you can use the Cinemaster tab to set their region.
#end
#winreg

  The windows region set controls only works for Windows 98
  Second Edition and Windows Millennium Editions.  Other
  windows versions require alternative methods which are
  fully documented at:
  http://faq.inmatrix.com
#end
#devdb
The DevDB registry key was found.  When it exists, the CineMaster engine
may use detected setting rather than the manually selected settings.
In order to remove it, press the "Erase DevDB" button on the "More Options" Panel.

This message will not appear again!
#end
#edlog
The "EDLOG.DAT" file was found in your windows directory,
Region changes may not have an effect until this file is removed.
#end
#cin2k
A reminder:

You are using a version of CineMaster that relies on both this region
setting, and the Windows internal region setting.  Setting this region
alone is insufficient, see http://faq.inmatrix.com for information
about the Internal Windows region controls.
#end
#email
Before sending an eMail, I strongly suggest reading http://faq.inmatrix.com.
A lot of the frequently asked questions are answered on this page and it may save you some time.

Please restrict your eMails to ENGLISH as it''s the only I can reply in.
If sending attachments, please make sure they are in a compressed form (ZIP, ARJ or RAR).
#end
#tnt
If you get a blurred image, try disabling the "Ignore Downscale caps" setting
by pressing More Options and unchecking it.
#end
#voodoo
If you get a yellow stripes on the playback window, try setting the
"Surface Flip Mode" setting to the default setting.
#end
#zoom
Make sure you select a window and specify a window size to zoom to.
#end
#keywarning
You are about to erase the internal Windows region key.
It is highly advisable to export this key for backup
purposes prior to proceeding.

Press OK to erase, Cancel to abort.
#end
#aplayer
You must specify the EXE location of the program/player
within the correct field on the AutoRegion tab.
#end
#firstrun
If this is the first time you running DVD Genie,
then i strongly suggest heading over to http://faq.inmatrix.com.

Under no circumstances should you try to change a Software Region
if your drive itself is region locked (see faq.inmatrix.com on that).

DVD Genie was not designed to work with any hardware decoders, and while
it can tweak a few sound options on the Hollywood-Plus card, it will not
support regional controls on any hardware decoder, period.

This message will only appear once, have a good day.
#end
#uninst
Uninstalling DVD Genie will remove all files and
registry entries created by DVD Genie.

The files will not be erased until after the next reboot.
#end
#uninstend
Uninstall Complete,

DVD Genie will be completly removed after the next reboot.
#end
#devdbdel
CineMaster keeps the DEVDB registry section for automatic setting adjustment
according to detected hardware.  However, when your hardware is found, adjusting
certain features will simply not work.  Deleting the DEVDB registry section may
be required for manual setting configuration.   Please note however that erasing it
may have an unforseen effet. To restore the DEVDB registry section, you will need to
reinstall the player.

Are you sure you want to erase the DEVDB registry section?
#end
#winkeynew
Please note, by pressing the OK button you will be recreating the
Windows 98 Second Edition region key.  The region code will be reset
to Region-1 and you will have one change remaining every time you reset.

This should not be attempted on other versions of Windows.
#end