home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Joystick Magazine 1995 May
/
CdJoystickN°2.iso
/
pool
/
video.txt
< prev
next >
Wrap
Text File
|
1995-03-24
|
2KB
|
40 lines
-----------
Video Setup
-----------
When you start Virtual Pool for the first time, the game will be in low
resolution to insure its compatibility with all VGA video cards. To
switch to high resolution mode, bring up the Main Menu by pressing the
Escape key or by clicking the right mouse button. From this menu, select
the option VIDEO SETUP. A window will open, displaying the installed
video drivers. Select the proper driver for your video card from the list.
These drivers are based on the type of chip used in various video cards.
There are currently many different manufacturers of video cards,
and each manufacturer may use different chips in different models, or
in different versions of the same card. To determine the chip set of your
particular video card, refer to your video card documentation, inspect the
actual video card for the chip type, or contact the manufacturer.
If you make a mistake and select the wrong card, don't worry. The program
should display an error message and allow you to return to the standard,
low resolution mode. If your computer should hang, simply reboot, and
when re-starting the game, press ESCape when given the option to bypass
the currently selected Video Driver. The game will then start in low-res
mode, and you can try another video selection.
Virtual Pool uses specific Video Drivers to insure the fastest possible
game play. As these drivers are constantly being written and updated,
there may not yet be one available for your particular Video Card. In
this case you may try the "Universal" driver by selecting the 640x480
VESA 1.2 BIOS EXTENSION. Note that the successful use of this driver
is dependent on several factors and may not be compatible with your
particular system or configuration.
If none of the included drivers work for your video card, don't worry.
Virtual Pool plays perfectly accurate in normal resolution mode.
<End_Of_File>