5020 Select the game controller that you want to configure or test.\n\n
5021 For information about a particular controller, select the controller and then click Settings.
5030 &Device Assignment...
5040 &Settings...
5050 &Test...
5060 OK
5070 Cancel
5080 &Apply
5130 Position
5150 Joystick
5160 Throttle
5170 Rudder
5180 Point of view hat
5190 Buttons
5300 Settings
5310 If you have attached a rudder or pedals to your controller, select the check box below.
5311 \n
5340 Game Controller Properties
5360 Device Assignment
5370 Device &Selection:
5380 &Assignment:
5400 Game Controller Properties
5410 To calibrate your game controller, click Calibrate.
5420 Product Name:\n\n
5421 \n\n
5422 \n\n
5430 Software Version:
5440 Copyright information:\n\n
5441 ⌐ 1996 Microsoft Corporation. All rights reserved.
5450 Product ID Number:
5460 %d device(s) connected
5470 Diagnostic Code:
5520 error
5700 Controller
5710 Status
5720 ID
5730 OK
5740 not connected
5760 Game Controllers
6000 Changes settings for game controller
6010 Controller
6020 controller
6030 controller's
6040 To set your controller's center position, leave its handle centered, and then press a button on the controller.
6050 To set your controller's range of motion, move its handle in complete circles several times, and then press a button on the controller.
6060 To set the range of motion for axis 3, move it all the way up and all the way down several times, and then press a button on the controller.
6070 To set the %1 position for your %2 point of view (POV) hat, move the POV hat to the %3 position, and then press ENTER.
6080 up
6090 down
6100 left
6110 right
6120 Controller %d Test
6130 Button 1
6140 Button 2
6150 Controller %d Calibration
6160 Your game controller is not connected correctly.\n\nEnsure that it is plugged into your computer.
6170 To calibrate your flight yoke's range of motion, move the yoke all the way in and out several times. Then move it all the way to the left and right several times. Finally, press one of the flight yoke's buttons.
6180 You have successfully calibrated your %s. To save your %s calibration, click Finish.
6190 To calibrate the range of motion for your game pad's D-Pad, press all eight of the D-Pad's corners, and then press one of the game pad's buttons.
6200 To set the center position of your game pad's D-Pad, press a button on your game pad without pressing the D-Pad.
6210 To set the center position for your flight yoke, leave the yoke centered, and then press one of its buttons.
6220 Game Controller Error
6230 To set the range of motion for axis 4, move it all the way from one side to the other several times, and then press one of your %s buttons.
6240 To calibrate your race car controller's range of motion, move the steering wheel all the way to the left and right several times. Then press the brake and gas pedals fully several times. Finally, press one of the race car controller's buttons.
6250 To set the center position for your race car controller's steering wheel and pedals, keep the wheel centered, keep your feet off the brake and gas pedals, and then press one of the car controller's buttons.
6260 To confirm your controller's center position, leave its handle centered, and then press a button on the controller.
6270 flight yoke
6280 car controller
6290 game pad
6300 Your computer does not have a game controller port.
6310 You have not finished calibrating your %s. To finish calibrating it, click Back.
6320 To set the range of motion for your U-axis, move it all the way up and all the way down several times, and then press one of your %s buttons.
6330 To set the range of motion for your V-axis, move it all the way up and all the way down several times, and then press one of your %s buttons.
6340 You must restart your computer before the new settings will take effect.\n\n
6341 Do you want to restart your computer now?
6350 Game Controller Settings Change
6360 To confirm the D-Pad's center position, press a button on your game pad without pressing the D-Pad.
6370 To confirm your flight yoke's center position, leave the yoke centered, and then press one of its buttons.
6380 To confirm the center position for your race car controller's steering wheel and pedals, leave the wheel centered, keep your feet off the brake and gas pedals, and then press one of the car controller's buttons.
6390 flight yoke's
6400 car controller's
6410 game pad's
6420 \n(done)
6430 V axis
6440 U axis
6450 Point of view hat
6460 Axis 3
6470 Axes 1 (X) and 2 (Y)
6480 Axis 4
6490 Set &POV
6500 < &Back
6510 &Next >
6520 &Finish
6530 Calibration Information
7000 (none)
7010 (Custom ...)
8010 Custom Game Controller
8020 Axes
8090 &Special Features
9000 Game Controllers
9001 Settings
9002 Test
10051 Test the %s. If the controller is not working correctly, it may need to be calibrated
