home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The Games Machine 29
/
XENIATGM29.iso
/
schede3d
/
d3d
/
vd3d205.exe
/
readme.txt
< prev
next >
Wrap
Text File
|
1997-04-21
|
6KB
|
174 lines
Direct3D Drivers for Voodoo Graphics Based 3D Accelerators
Version 2.08
Copyright ( 1997 3Dfx Interactive, Inc. )
All Rights Reserved
3Dfx Interactive, Inc.
website: www.3Dfx.com
news server: news.3dfx.com
=======================================================================
What's in the distribution?
=======================================================================
This distribution contains Direct3D drivers (Version 2.08) for Voodoo
Graphics Based 3D Accelerators. These drivers were tested on the
following boards:
- 3Dfx Interactive reference boards
- Diamond Monster 3D
- Orchid Righteous 3D
- Deltron Realvision Flash 3D
NOTE: 3Dfx Interactive will provide support for 3Dfx reference board
users only!! Monster 3D and Orchid Righteous 3D users are recommended to
use drivers provided by each respective company to ensure that they can
obtain full support.
- Monster 3D supported drivers can be obtained from www.diamondmm.com
- Righteous 3D supported drivers can be obtained from www.orchid.com
- Flash 3D supported driver can be obtained from your Flash 3D reseller
NOTE: Using these drivers over an existing Diamond Monster 3D or
Orchid Righteous 3D driver install will cause the Control Panel Display
properties extensions for the Monster 3D and the Righteous 3D to be
removed.
Included Files
--------------
DD3DFX.DRV - Direct Draw Driver
DD3DFX16.DLL - DirectDraw 16 Bit DLL
DD3DFX32.DLL - DirectDraw 32 Bit DLL
FXMEMMAP.VXD - Voodoo VXD for Mapping Memory
MSVCRT.DLL - Microsoft Redistributable File
VOODOO.INF - INF File for installing Drivers
README.TXT - This File
=======================================================================
Installation
=======================================================================
Requirements
------------
- Windows 95
- PC with a Pentium or Pentium Pro Processor and a free PCI slot
- 16MB of RAM or more Suggested
Installation
------------
Existing Drivers Installed or PCI Multimedia Device shown in Device Mgr
-----------------------------------------------------------------------
1) Start Windows 95 and open Device Manager (Control Panel, System)
2) Locate the existing reference to the card it will be listed as:
Obsidian Card : Other Devices / PCI Multimedia Device
Monster 3D : Multimedia / Monster 3D
Righteous 3D : Sound, Video and Game Contrl / Righteous 3D
3) Double Click on the card, then click the driver Tab
4) Click Change Driver and choose Have Disk.
5) Point to the location you extracted the Voodoo Graphics Direct3D
drivers to and click OK.
6) Select Voodoo Based 3D Accelerator from the List and click OK.
Click OK again to save changes in Device Manager.
7) You MAY then be prompted to insert the "DirectX Drivers for Voodoo
Based 3D Accelerator" Disk. Again, point to the path you extracted
the files to and press OK.
8) Windows will copy the drivers from the Floppy. Reboot the system
when prompted
9) Install DirectX 2.0 or 3.0. (If not already installed)
No Current Drivers Installed
----------------------------
1) Start Windows 95
2) Copy the Voodoo Graphics Direct3D drivers you extracted to a floppy.
(This will make installation easier for a new device.)
3) Power off System and install your Voodoo Graphics 3D Based
Accelerator into a PCI slot. (Users with PCI to PCI bridges, should
install on a primary PCI Slot)
4) Restart Windows 95 after hardware installation.
5) Windows 95 will detect a "PCI Multimedia Device", you need to:
Windows 95 Standard Release users: Select "Use Driver from Mfr"
and click OK
Windows 95 OEM SR2 users: Click the Next Button on the
Detection Dialog Box
6) Insert the installation floppy you created in step 2 in the A: drive
and point the driver location to A:\ then click OK
(OEM SR2 users, just click Next)
7) You MAY then be prompted to insert the "DirectX Drivers for Voodoo
Based 3D Accelerator" Disk. Enter A:\ and press OK.
8) Windows will copy the drivers from the Floppy. Reboot the system
when prompted
9) Install DirectX 2.0 or 3.0.
Troubleshooting
---------------
####
Problem: After installing this driver, the Control panel applet I had
for the Monster 3D or Righteous 3D is now gone
Resolution: As noted earlier, such applets and extensions are removed.
Please download and install drivers from your card manufacturer, drivers
may be obtained from:
- Diamond supported drivers can be obtained from www.diamondmm.com
- Orchid supported drivers can be obtained from www.orchid.com
####
Problem: How I change the refresh rate and Gamma?
Resolution: Using Registry Editor, edit:
HKLM\Software\3Dfx Interactive\Voodoo Graphics
WARNING: Using Registry editor incorrectly can cause unexpected
results. Only those comfortable with altering the registry
should make changes.
Add the following Entries as DWORD Value types:
Value Name Value Description
---------- -----------------
REFRESH_512x384 Refresh Rate for 512x384
REFRESH_640x400 Refresh Rate for 640x400
REFRESH_640x480 Refresh Rate for 640x480
REFRESH_800x600 Refresh Rate for 800x600
(Supported refresh rate decimal values: 60, 75, 85, 120)
SST_GAMMAB Blue Gamma Setting
SST_GAMMAG Green Gamma Setting
SST_GAMMAR Red Gamma Setting
(Hex default for Gamma: 0x3FF73333)
####