2001 %1 isn't found.\nIn case of the media contains this program is removed from drive, please insert it into the original drive and push the Retry button,to continue the set-up.
2002 %1 is not readable.
2003 Eather there are no space in the drive that the system is installed or the drive is write protected.
2004 %s finished normally.
2005 The execution of %s was interrupted.
2006 %s finished normally.\n\nTo validate the setting of connection to Internet, it is necessary to restart your computer.\nDo you want to restart your computer now?
2007 To validate the setting of connection to Internet, it is necessary to restart your computer.\nDo you want to restart your computer now?
2008 Undefined system detected.\nOnly Windows 95/98 or Windows NT4.0 system is supported by this program.
2009 Cannot assign the shared memory. \nThe initialization of this program was failed.
2010 The initialization of this program was failed.
2011 No modem is registered in Dial-Up Network.\nPlease register one eather by start Modem Wizard and delete Modem definition, and re-register the modem, or, by start Remote Access SetUp and register Modem in Dial-Up Network.\nThen, restart this program.
2012 Your computer will be restarted. \nIf Floppy disc is inserted in drive, please remove it.\nIf you are ready, push the OK button to restart your computer.
2013 Your computer couldn't be restarted.\nPlease restart by hand.\nAfter your computer is restarted, the setting becomes valid.
2014 %s finished normaly.\nPlease restart your computer.
2015 The error occoured in the execution of this program.\nThe setting of connection to Internet doesn't finish yet.
2016 Registry Key "%1" can't be created.
2017 Registry Key "%1" can't be updated.
2018 Registry Key "%1" can't be deleted.
2019 Internel error (%1). Process was interruped.
2020 ?2020
2021 Dial-Up Network isn't installed.
2022 Installing Dial-Up Network ...
2023 Installing TCP/IP Protocol ...
2024 Configuring Dial-Up Networking ...
2025 Updating registry ...
2026 Dial-Up Network couldn't be installed.
2027 TCP/IP protocol couldn't be installed.
2028 Internal error (rasapi32.dll).Process was interrupted.
2029 Dial-Up Network couldn't be configured. (%d)
2030 Failed to write the Registry information.\nThe setting is incomplete.
2031 Cannot find alert.txt.
2032 Your Password was not being saved.\nThat means, It is necessary to input your Password every time you connect to the Dial-Up Network.
2033 Internal error (%s [COMMON]).\nDetai:%s!=%s\nProcess was interrupted.
2034 Internal error (%s [APMAX]).\nDetail:maxap=%d\nProcess was interrupted.
2035 Internal error (%s [COMMON]).\nDetail:%s!=%s\nProcess was interrupted.
2036 Internal error (Cannot find pppsetup.idx).\nProcess was interrupted.
2037 Internal error (%s [COMMON] ).\nDetail:%s\nProcess was interrupted.
2038 Internal error (%s).\nDetail:%s\nProcess was interrupted.
2039 A Modem that is necessary for connection to Dial-Up isn't Installed.\nDo you install Modem with starting Modem Wizard now?
2040 Cannot process %s with no Modem installed.\nPlease install a Modem with referring to the manual belongs to the Modem, and start this program again.
2041 Cannot execute Modem Wizard.
2042 Cannot find Dial-Up Network (Remote Access Service). \nDial-Up Network is necessary to execute %s.\nDo you want to install Dial-Up Network?
2043 Please set Windows NT4.0 System CD (Disk1), and push the OK button.
2044 Failed to install Dial-Up Network.\nPlease install Dial-Up Network with referring to the manual, and start this program again.
2045 To set the connection to Internet, it is necessary to restart your computer.\nDo you want to restart your computer now?
2046 Your computer will be restarted.\nIf a floppy disc is inserted in drive, remove it.\nIf you are ready, push the OK button to restart your computer.\nAfter it is restarted, continue the setting process by restart this program.
2047 Cannot continue setting without restart your computer. Please restart your computer, and then, restart this program.
2048 Please install Dial-Up Network with referring to the manual, and start this program again.
2049 Failed to write the Registry information. (Internet Explorer)
2050 Failed to write the Registry information. (Microsoft Exchange)
2051 Failed to write the Registry information. (Microsoft Internet Mail and News)
2052 Failed to write the Registry information. (Netscape Navigator / Communicator)
2053 Failed to write the Registry information. (Netscape Communicator)
2054 Failed to write the Registry information. (EUDORA PRO for Windows)
2055 Internel error (%1). Process was interruped.
2056 Configuring Softwares ...
2057 A Modem that is necessary for connection to Dial-Up isn't Installed.\nDo you install Modem with starting Modem Wizard now?
2058 ?2058
2059 Network Setup Error (%1)
2060 Dial-UP Netowork Setup Error (%1)
2061 Failed to write the Registry information. (Microsoft Outlook Express)
2062 ?2062
2063 ?2063
2064 ?2064
2065 Failed to install the TCP/IP protcol.
2066 ?2066
2067 ?2067
2068 ?2068
2069 ?2069
2070 ?2070
2071 ?2071
2072 ?2072
2100 Cannot use Microsoft Exchange for send and receive Internet Mail because there are no profile in Microsoft Exchange or Internet Mail Service is not in the profile.\nTo send and receive Internet Mail by Microsoft Exchange, start Microsoft Exchange by double clicking the receive tray on the desktop, and add Internet Mail Service to the profile and restart this program.