31=,"The printer port will be configured automatically.","","Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed."
32=,"Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed.","","If you do not want to configure the printer port automatically, or if your printer is connected through a network, click the Cancel button."
35=,"The printer port connection could not be confirmed.","","Make sure that the printer is connected properly and that the power is on, then click the Retry button."
36=,"The printer may not be connected properly, or a different printer may be connected.","","Confirm the printer and its connections, then click the Retry button."
[stringid.winnt50]
1=,"EPSON Printer Utility Setup"
11=,"OK"
12=,"Stop searching"
13=,"Retry"
14=,"Abort"
15=,"Please wait..."
31=,"The printer port will be configured automatically.","","Make sure the printer is connected to the computer, then turn the printer on and wait for configuration to proceed."
32=,"Make sure the printer is connected to the computer, then turn the printer on and wait for confirmation.","The program searches for the printer to set the printer port.","","You should click [Stop searching] in either of the following situations:","- if the printer is connected to a network.","- if you connect the printer to the computer with a parallel cable."
35=,"The printer may not be connected properly, or the printer may not be turned on.","","Check the printer and cable connections, then click the Retry button."
36=,"The printer may not be connected properly, or the printer may not be turned on.","","Check the printer and cable connections, then click the Retry button."