home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 2001 April
/
VPR0104A.BIN
/
DRIVER
/
EIZO
/
L660INF
/
L660INF.EXE
/
README.TXT
< prev
next >
Wrap
Text File
|
2000-10-12
|
10KB
|
264 lines
******************************************************************************
About Display Information File
******************************************************************************
The Display Information File includes the information of your display.
When your display does not support Plug & Play function, this file enables
setting suitable resolution and refresh rate for your display.
* About Plug & Play
When your computer and display support VESA DDC, the suitable resolution
and the refresh rate are set by just plugging your display into the
computer without any manual settings.
When your computer system supports Plug & Play, the Display Information
File is not required except for installing the Color Profile.
(System requirement for Plug & Play)
OS (Operating System) supporting VESA DDC
Microsoft Windows 95 (Windows 95)
Microsoft Windows 98 (Windows 98)
Microsoft Windows 2000 (Windows 2000)
Microsoft Windows Millennium Edition (Windows Me)
Computer (Graphics Board) supporting VESA DDC
Display Cable supporting VESA DDC
* Please contact each manufacture (computer, OS, graphics board)
to find if your system supports VESA DDC.
* The following procedure may differ depending on your computer
(graphics board).
* About VESA DDC
Plug & Play standard for the display settled by VESA (Video Electronics
Standards Association)
==============================================================================
1) For using on Windows 95
==============================================================================
When your system does not support VESA DDC, the display name is listed in the
display list and monitor information is stored in Windows 95 by installing the
Display Information File.
Settings
(1) Connect the Display with the Computer and start Windows 95.
(2) Download the "Display Information File" and copy the extracted files into
the floppy disk.
(3) Click "Start" and select "Control Panel" from "Settings".
(4) Double-click "Display" icon in the "Control Panel" and open "Display
Properties".
(5) Select "Settings" tag and click "Change Display Type...".
(or click "Advanced...".)
(6) Select "Change..." from "Monitor type".
(or select "Monitor" tag and click "Change...".)
(7) Click "Have Disk..." in the Selected Device dialog box.
(8) Insert above (2) floppy disk into the floppy disk drive.
(9) Select the floppy disk drive and select "Copy manufacturer files from:"
and then click "OK".
(10) Select the preferred monitor from the displayed "Models:" list.
(11) Select "OK" and close the dialog box.
(12) Restart Windows 95 to activate the setting.
============================================================================
2) For using on Windows 98
============================================================================
* For the system supporting VESA DDC
If your system supports VESA DDC, the display is automatically recognized
and suitable resolution and refresh rate are selected.
There is no need to install the Display Information File except for using
the Color Profile.
Settings
(1) Connect the Display with the Computer and start Windows 98.
(2) After "New Hardware Found" is displayed, "Add New Hardware Wizard"
window appears and "The wizard searches for new drivers for: Plug and
Play Minter" is displayed. Click "Next".
(3) Select "Search for the best driver for your device. (Recommended)" then
click "Next".
(4) Click "Next" without marking the target drive for searching the driver.
(5) "Windows driver file searches for the device: Plug and Play Monitor" is
displayed then click "Next".
(6) "Windows has finished installing the software that your new hardware
device requires." is displayed then click "Finish".
* For the system not supporting VESA DDC
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tag and click "Advanced...".
(5) Select "Monitor" tag and click "Change...".
(6) "Update Device Driver Wizard" windows appears and click "Next".
(7) Select "Display a list of all the drivers in a specific location, so
you can select the driver you want." then click "Next".
(8) Click "Have Disk..."
(9) "Install From Disk" window is displayed and select a floppy disk drive
in the "Copy manufacturer's files from:" section. Click "OK".
(10) Select a suitable display name from the "Models:" then click "Next".
(11) "Windows driver file searches for the device:" is displayed and click
"Next".
(12) "Windows has finished installing the driver you selected for your
hardware device." is displayed and click "Finish".
============================================================================
3) For using on Windows 2000
============================================================================
* For the system supporting VESA DDC
If your system supports VESA DDC, the display is automatically recognized
and suitable resolution and refresh rate are selected.
There is no need to install the Display Information File except for using
the Color Profile.
Settings
(1) Connect the Display with the Computer and start Windows 2000.
Confirmation
(1) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tag and click "Advanced...".
(5) Select "Monitor" tag and confirm "Plug and Play Monitor" is displayed
in the "Monitor Type".
* For the system not supporting VESA DDC
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tag and click "Advanced...".
(5) Select "Monitor" tag and click "Properties".
(6) Select "Driver" tag and click "Update Driver...".
(7) "Upgrade Device Driver Wizard" window is displayed and click "Next".
(8) Select "Display a list of the known drivers for this device so that
I can choose a specific driver" and click "Next".
(9) Click "Have Disk...".
(10) "Install From Disk" window is displayed and select a floppy disk drive
in the "Copy manufacturer's files from:" section. Click "OK".
(11) Select a suitable display name from the "Models:" then click "Next".
(12) "The wizard is ready to install the driver for the following hardware
device:" is displayed and confirm that your selected display name
is displayed. Click "Next".
(13) "Digital Signature Not Found" window may appear. Click "Yes" to
continue the installation.
(14) "Completing the Upgrade Device Driver Wizard" is displayed and
click "Finish".
******************************************************************************
About Color Profile
******************************************************************************
Color Profile (ICC Profile) includes all the necessary color information
for the display.
This file is used for color management with the application software
which support ICC function.
* What is the ICC Profile?
A specific file including the color characteristic information for the
device, settled by ICC (International Color Consortium).
* Settings
The Color Profile is not automatically installed on Windows 98 and
Windows 2000. Please install the profile following the instruction
of below.
When installing the Display Information File with above procedure,
the Color Profile is automatically installed. In this case, the following
profile will be set as a default profile;
Default Color Profile;
CRT Display Monitor: xxx_93 (9300K Color Temperature)
LCD Display Monitor: xxx_m1 (Color Mode 1)
============================================================================
For using on Windows 98 and Windows 2000
============================================================================
Settings
(1) Download "Display Information File" and copy the extracted files
into the floppy disk and insert the disk into the floppy disk drive.
(2) Click "Start" and select "Control Panel" from "Settings".
(3) Double click "Display" icon in "Control Panel" and open "Display
Properties".
(4) Select "Settings" tag and click "Advanced...".
(5) Select "Color Management" tag and click "Add...".
(6) "Add Profile Association" window is displayed and select a floppy disk
drive in the "Look in:" section.
(7) Select a suitable Color Profile from the list then click "Add".
(8) Select a Color Profile from the list in the "Color Profiles currently
associated with this device:" and click "Set As Default".
(9) Click "Apply" and click "OK" to close a menu.
------------------------------------------------------------------------------
Copyright(c) 2000 EIZO NANAO CORPORATION