home *** CD-ROM | disk | FTP | other *** search
/ DOS/V Power Report 2000 May / VPR0005B.BIN / DRIVER / MATROX / W9X_552 / Readme.txt next >
INI File  |  2000-02-21  |  5KB  |  127 lines

  1. [English]
  2. PDREADME.TXT                MATROX GRAPHICS INC.              2000.02.21
  3.  
  4.                        Matrox PowerDesk for Windows 95/98
  5.                              Revision 5.52.015
  6.  
  7.  
  8. Contents
  9. ========
  10.  
  11. - Description of this release
  12. - Installation
  13. - More information
  14. - Notes, problems, and limitations
  15.  
  16.  
  17. Description of this release
  18. ===========================
  19.  
  20. Matrox PowerDesk software includes a display driver and display utilities.
  21. With this software, you can take full advantage of your Matrox graphics 
  22. hardware and you can access additional Matrox display-related features.
  23.  
  24.  
  25. Installation
  26. ============
  27.  
  28. To install Matrox PowerDesk, start the "setup" program included with it, 
  29. then follow the on-screen instructions.
  30.  
  31. The setup program will only install software if a Matrox graphics card model
  32. supported by the setup program is installed in your computer. 
  33.  
  34.  
  35. More information
  36. ================
  37.  
  38. For more information on Matrox PowerDesk, see the help file included with it. 
  39. For information specific to your Matrox graphics card, see your Matrox or 
  40. system manual.
  41.  
  42.  
  43. Notes, problems, and limitations
  44. ================================
  45.  
  46. - DirectDraw, Direct3D and DirectVideo support
  47.  
  48.   The DirectDraw driver we provide is compatible with DirectX 2 (and
  49.   later) and includes Direct3D support. For our DirectDraw/Direct3D
  50.   driver to be called, and benefit from hardware acceleration,
  51.   Microsoft DirectX 2 (or later) MUST be installed, even for programs
  52.   originally made for DirectX 1.
  53.  
  54.   Also, if a recent version of DirectX isn't installed, some Matrox 
  55.   PowerDesk features may not be available.
  56.  
  57.   We provide DirectX on the Matrox CD-ROM. The latest DirectX is
  58.   available from the Microsoft Web site, and is included with many 
  59.   DirectX programs.
  60.  
  61.   IMPORTANT: If the DirectX setup program prompts you to replace the
  62.   existing display drivers, click "No". Otherwise, the setup program 
  63.   installs display drivers which are not as optimized as the Matrox 
  64.   drivers and which do not support PowerDesk software.
  65.  
  66.   Note that depending on the origin of your Microsoft DirectX software, 
  67.   it may not include DirectVideo support. For faster playback of Indeo 
  68.   and Cinepak AVI files, you should install Microsoft DirectVideo 
  69.   support. 
  70.  
  71. - Matrox bus mastering
  72.  
  73.   This driver supports bus mastering. Bus mastering is a feature that 
  74.   allows expansion cards to perform tasks at the same time as your 
  75.   computer's CPU. If you have a fast Pentium computer (faster than 
  76.   166 MHz), the display performance of most programs is improved when 
  77.   bus mastering is used.
  78.  
  79.   To use bus mastering with 3D (DirectX) programs, your graphics card 
  80.   needs an interrupt request (IRQ). Most computers automatically assign 
  81.   an IRQ to graphics cards, but some do not. If your graphics card hasn't 
  82.   been assigned an IRQ, programs that use Matrox bus mastering may not 
  83.   work properly. For more information, see your Matrox or system manual.
  84.  
  85. - Monitors in interlaced mode
  86.  
  87.   Some older monitors such as the NEC 3D and many "Super VGA" monitors
  88.   do not support non-interlaced mode in all resolutions. The Matrox display 
  89.   driver does not properly handle interlaced mode with the Windows 
  90.   monitor selection method. If you have one of these monitors, please 
  91.   use the Matrox Monitor selection method.
  92.  
  93. - DirectDraw and Automatic Power Management
  94.  
  95.   As stated in "Microsoft DirectX Release Notes", September 30, 1995, a 
  96.   DirectDraw game may be unable to restore properly if it is suspended 
  97.   by Automatic Power Management utilities.
  98.  
  99. - Installation in different language versions of Windows
  100.  
  101.   If you install software in a language different from the language of 
  102.   your operating system (for example, English software on a Japanese 
  103.   system), you may have problems with text and dialog box controls being 
  104.   cut off. This is because of differences in system fonts.
  105.  
  106. - OpenGL support
  107.  
  108.   Note the following limitations related to the OpenGL driver included with
  109.   Matrox PowerDesk:
  110.  
  111.     - OpenGL support may not be included in some versions of Matrox PowerDesk.
  112.       For a version of Matrox PowerDesk with OpenGL support enabled, see
  113.       the Matrox Web site (www.matrox.com/mga).
  114.  
  115.     - Regardless of your graphics card or display driver, Windows 98 only 
  116.       supports OpenGL acceleration with the primary display of your computer.
  117.       (The "primary display" is the one that first displays information when
  118.       you restart your computer.)
  119.  
  120.     - With the "Tribes" game, you may notice some minor display artifacts and 
  121.       the opening video introduction may not display properly.
  122.  
  123.     - Using 3D Studio Max 2.0, you may experience problems with the viewports
  124.       being improperly redrawn. If this happens, simply click in a viewport 
  125.       to properly update their display. (This problem isn't present with 
  126.       version 2.5 or 3.0 of 3D Studio Max.)
  127.