home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1999 May
/
VPR9905A.BIN
/
DRIVER
/
TEKRAM
/
DC390U2W
/
NETWARE.31X
/
README.31X
< prev
Wrap
Text File
|
1995-12-06
|
2KB
|
42 lines
< Installing the NetWare V3.1x drivers>
The following introduces how to install driver modules, NV31XBMP.DSK, for
NetWare v3.11/3.12/SFT-III:
First copy the two files, NV31XBMP.DSK and ASPITRAN.DSK, from the NetWare
driver diskette that comes with your DC-390U/W/F to the directory where the
server program resides.
After booting up the NetWare operating system, load the DC-390U/W/F driver by
typing at the prompt
:load nv31xbmp <Return>
ASPITRAN.DSK will be automatically loaded with messages like the following:
Loading module NV31XBMP.DSK
DC-390W/U/F(T) PCI SCSI Driver For NetWare V3.1X/SFT-III
Version 1.56 November 21, 1995
Auto-loading module ASPITRAN.DSK
Tekram SCSI Adapter NetWare 386 ASPI Transport Layer
Version 1.51 April 24, 1995
Supported Slot values are 27
Slot = 27 (note: this slot number is SLOT and MAINBOARD dependent)
Write down this slot number for later use and press <Enter> to proceed:
DC-390U: BUS#00 DEV#0B FUN#0
Adapter SCSI ID : 7
I/O Port Address : FC00h
Interrupt Level : 11
To simplify the booting procedure thereafter, you may want to edit STARTUP.NCF
file by modifying the line:
LOAD NV31XBMP port=FC00 int=A
to =>
LOAD NV31XBMP SLOT=X (note: use the slot number you just wrote down)
Replace the 'X' with 27 for the current example. Refer to the NetWare manual for
the procedure to edit this STARTUP.NCF file.
In case that two or more DC-390U/W/Fs are present, you have to load the same
driver by typing "load NV31XBMP" as many times as the number of DC-390U/W/F
adapters installed.