home *** CD-ROM | disk | FTP | other *** search
- HHE v1.0
- By Greg Lewis (Tree)
- gregl@umich.edu
-
- The start-up instructions for using HHE are very basic. Here's the
- easy 3-step list to get you started:
-
- 1. It's suggested to make a separate directory and store all of your
- HHE files there. It doesn't matter where you put it or what you call it,
- as long as the HHE.INI and HHE.EXE files are both in that directory you
- should be set.
-
- 2. Edit your HHE.INI file and change all the necessary parameters to
- reflect the setup of your computer. This should be as simple as changing
- a path or two, and filling in the specs for your Sound-Blaster compatible
- card.
-
- 3. Now making sure that HHE and the ini file are in the same directory,
- run HHE. As long as you don't get any errors, you're ready to start
- experimenting! If you do get any errors about finding the exe or WAD
- files that HHE needs, go back and double check that the paths are correct
- in the ini file. That is the most common cause of start-up problems.
-
- Now you should be all set up. Have fun, send me email if you have any
- problems and I'll try to help you out.
-