home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1999 February
/
VPR9902B.ISO
/
Upgrade
/
UpgradeE
/
README
next >
Wrap
Text File
|
1998-11-11
|
1KB
|
43 lines
README for TurboLinux's 2.0->3.0 upgrade script
by Scott Stone <sstone@turbolinux.com>
-----------------------------------------------
This script carries its own documentation which will be presented to
you as you move through the upgrade process. However, it is highly
recommended that you print out a copy of upgrade-doc2.txt and have it
handy while performing the upgrade.
To start the upgrade, log in to your system as the super-user (root).
If you have a TurboLinux 3.0 CD-ROM, place it in the drive and mount
it with 'mount /mnt/cdrom'. Then, you must enter runlevel 1 by typing
'telinit 1'. Once you are in runlevel 1 (single-user mode), cd to the
directory that contains this file and run './upgrade'
When the process is finished, the system will be halted. At this
point you may either reboot with CTRL-ALT-DEL, hit the reset button,
or turn the computer off.
REQUIREMENTS:
-------------
1. A system with TurboLinux 2.0 English (USA) installed on it. This
script can NOT upgrade TurboLinux 1.x to 3.0.
2. A TurboLinux 3.0 CD-ROM or a sufficiently fast network connection
to upgrade via FTP.
PACKING LIST:
--------------
You should have the following files in this archive:
README
upgrade.sh
upgrade2.sh
upgrade (symbolic link to upgrade.sh)
turbopkg-5.3.3-1TL.i386.rpm
upgrade-doc1.txt
upgrade-doc2.txt
upgrade-doc3.txt
upgrade-cdwarn.txt