home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1998 October
/
VPR9810B.BIN
/
DRIVER
/
asus
/
L101V109
/
WIN95
/
PUSH
/
MSBATCH.INF
< prev
next >
Wrap
INI File
|
1997-10-09
|
18KB
|
468 lines
; Microsoft Windows 95* Answer File
; Version 1.00
; Answer File Parameters
; ---------------------------------------------------------------------
; You must include the sections below in any answer file you create, even if the only information
; in the section is the section name. Otherwise, the Setup program will wait for user input.
; For new installations, you must specify all the parameters in the
; answer file because the system doesn't have existing information
; for the Setup program to use.
;
; The sections are arranged in the order the Setup program runs.
[BatchSetup]
Version=2.0 (32-bit)
SaveDate=10/10/96
[Setup]
ProductType=1
ProductID=335-6185957-
; This section controls the Windows95 setup.
Express=1
; This paramter specifies whether or not the
; user can give input during setup. The default
; value is 0.
; 0 = setup will ask the user for input.
; 1 = setup will not ask the user for input and
; will use only the settings specified in this
; answer file or built-in defaults.
InstallDir="c:\windows"
; The value of the parameter "InstallDir" is the directory
; where Windows95 is to be installed. The default value
; is the current windows directory, if it is present on
; the computer.
EBD=0
; This parameter specifies if a startup disk is to be created
; during setup.
; 0 = Setup will not create a startup disk.
; 1 = Setup will create a startup disk. This is
; also the default.
ChangeDir=0
OptionalComponents=1
Network=1
System=0
CCP=0
CleanBoot=0
Display=0
PenWinWarning=0
; This parameter specifies if a warning is to be displayed
; if an unknown version of Pen Windows is installed.
; 0 = Do not display warning.
; 1 = Display warning.
InstallType=1
; This parameter specifies how to install Windows95.
; 0 = Compact
; 1 = Typical
; 2 = Portable
; 3 = Custom
DevicePath=0
; This parameter specifies if Windows95 should check some
; path to find INF files, in addition to the
; Windows95 INF directory. If the value is set to
; check a path, INF files can be added to a single
; location (the path). Only specify a path if the
; installation source files are on a network directory.
; 0 = Do not add a path for INFs.
; 1 = Add the path for finding additional INF files.
TimeZone="GMT"
; This parameter specifies the time zone.
Uninstall=0
; This parameter specifies if a pre-existing version of
; Windows and MS-DOS should be compressed into a
; backup version to be used to automatically uninstall
; Windows95.
; 0 = The user is not allowed to speciy uninstall
; options and the compressed backup files are not
; created.
; 1 = Display the uninstall options for the user to
; select.
; 5 = The unistall options are not displayed and the
; pre-existing version of Windows and MS-DOS are
; compressed into a backup version to be used to
; automatically uninstall Windows95.
VRC=0
; This parameter specifies if setup should overwrite
; existing files during setup, regardless of the
; dates of all files.
; 0 = If a file on the computer that is to be overwritten
; is more recent than its replacement, the user will
; be prompted to confirm the operation.
; 1 = Files are overwritten regardless of the date.
NoPrompt2Boot=1
[NameAndOrg]
; This section specifies the name and organization to
; which this copy of Windows95 belongs.
Name="User Name"
; The value of this parameter is a string that is the name
; of the user of Windows95.
Org="Organization Name"
; The value of this parameter is a string that is the
; name of the organization to which this Windows95
; belongs.
Display=0
; This parameter specifies if the dialog box with Name and
; Organization appears during setup.
; 0 = The dialog box is not displayed.
; 1 = The dialog box is displayed.
[Network]
; This section contains information about installing
; network information during setup of Windows95.
ComputerName="ComputerName"
; The value of this parameter is a string which specifies the
; computer's network name.
; This parameter is generated by the Configuration Manager
; and will consist of the first three letters of the user
; who logged in and the MAC address.
;
; For example: If user1 logged in with a MAC address of
; 0123456789AB, the computer name would be set to
; use0123456789AB.
;
; This name can be changed in the Control Panel after NT
; has been installed. Any value you enter above will be
; overwritten during installation.
Workgroup="Workgroup"
; The value of this parameter is a string which specifes the
; workgroup name for the computer on which Windows95 is
; being installed.
Description="Description"
; The value of this parameter is a string which is a description
; for the computer. The string is a maximum of 48
; characters with no commas.
Display=0
; This parameter specifies if the network configuration dialog
; boxes are to appear in custom setup.
; 0 = Do not display the network configuration dialog boxes.
; 1 = Display the network configuration dialog boxes.
Clients=VREDIR, NWREDIR
; This parameter specifies which network clients are to be
; installed during setup. The value for this parameter is a
; comma separated list of devices ids used in the INF files.
; The first client in a comma separated list will be the
; first to start.
; The default values used in this answer file are:
; VREDIR - Client for Microsoft Windows
; NWREDIR - Microsoft Client* for NetWare*
Protocols=NETBEUI, NWLINK, NWNBLINK, MSTCP
; This parameter specifies which network protocols are to
; be installed during setup. The value for this parameter is
; a comma separated list of protocol device ids used
; in the INF files.
; The default values used in this answer file are:
; NETBEUI - Microsoft NETBEUI
; NWLINK - IPX/SPX
; NWNBLINK - NetBIOS support for IPX/SPX
; MSTCP - Mircosoft TCP/IP
; Other values possible:
; DEC40 - DECnet 4.1 Ethernet*
; DEC40t - DECnet 4.1 Token Ring*
; DEC50 - DECnet 5.0A Ethernet*
; DEC50t - DECnet 5.0A Ethernet*
; NFSLINK - Sun PC NFS*
; NDTOKBAN - Banyan VINES NDIS Token Ring*
; NDISBAN - Banyan VINES NDIS Ethernet*
; MSDLC - Microsoft DLC*
; IPXODI - Novell IPXODI*
IgnoreDetectedNetCards=0
; This parameter specifies if setup uses detected information
; to configure network cards. If detected information
; is not used, then the value of the parameter "netcards" (which
; is not used in this default answer file) will
; be used to configure network cards.
; 0 = Use detected information to configure network cards.
; 1 = Do not use detected information to configure
; network cards.
Security=SHARE
; This parameter specifies what kind of security model is
; to be used and the type of pass-through agent for
; user level security. The client must be installed with
; a security provider in order for this parameter to have the
; desired effect.
; SHARE = share level security.
; NWSERVER = user level security by a NetWare server.
; DOMAIN = user level security by a Windows NT domain.
; MSSERVER = user level security by a Windows NT Workstation.
PrimaryLogon=VREDIR
DefaultProtocol=MSTCP
; This parameter specifies the default protocol. The value
; of this parameter can be a protocol with an associated
; network card OR just a protocol. If a protocol is
; listed with a network card, then that protocol is
; bound to that network card. The protocol must be
; a protocol device id that is listed in the "Protocol" parameter
; of the [Network] section of this answer file. The network
; card must be a network card device id that is listed in
; the "Netcard" (which is not used in this default answer file)
; parameter of the [Network] section of this answer file.
; For example:
; DefaultProtocol = MSTCP
; specifies Microsoft TCP/IP* as the default protocol.
; For example:
; DefaultProtocol = MSTCP,<network card id>
; would cause an instance of MSTCP to be bound to that
; adapter.
Services=VSERVER
; This parameter specifies which network services are to
; be installed. The value is a comma separated list
; of device ids used in the INF files.
; The default values used in this answer file are:
; VSERVER - File/Printer sharing for Microsoft Networks*
; Other values possible:
; BKUPAGNT - Arcada Backup Exec* agent
; CHEYAGNT - Cheyenne ARCserve* agent
; JADM - HP Network Printer for Microsoft*
; JANW - HP Network Printer for NetWare*
; NMAGENT - Microsoft Network Monitor Agent*
; NWSERVER - File and Printer Shaing for NetWare Networks*
; PSERVER - Microsoft Print Service for NetWare Networks*
; REMOVEREG - Microsoft Remote Registry* service
; SNMP - Microsoft SNMP* agent
ValidateNetCardResources=1
; This parameter specifies if a dialog box is to be displayed
; to have the user respond to resource conflicts.
; Resource conflicts include a partial configuration is
; found or there is an IRQ conflict involving the
; network card.
; 0 = The dialog box is not displayed.
; 1 = The dialog box is displayed.
[NWLINK]
; This section specifies settings for the IPX/SPX
; protocols. These settings are valid only if
; "nwlink" is a value for the "Protocols" parameter in the
; [Network] section.
NetBIOS=1
; This parameter specifies if NetBIOS support for IPX/SPX
; should be installed during setup.
; 0 = NetBIOS support for IPX/SPX is not installed.
; 1 = NetBIOS support for IPX/SPX is installed.
Frame_Type=4
; This parameter specifies the default frame type for the
; IPX protocol.
; 0 = 802.3
; 1 = 802.2
; 2 = Ethernet II
; 4 = Auto
; 5 = Token Ring
; 6 = Token Ring SNAP
[NWREDIR]
; This section contains information to install the
; Client for NetWare.
FirstNetDrive=F:
; This parameter specifies the first network drive that a
; client for NetWare will attach. The value for this
; parameter is a drive letter. The colon is not required but
; may be present. The value of this parameter overrides the
; setting in the net.cfg file.
ProcessLoginScript=1
; This parameter specifies if login script processing is enabled
; when the client for NetWare is active.
; 0 = Login script processing is not enabled for the client.
; 1 = Login script processing is enabled for the client.
[VREDIR]
; This section contains information for installing the
; Client for Microsoft Networks*.
LogonDomain="Workgroup"
; This parameter specifies which Windows NT domain is to be
; used for logon validation (see "ValidatedLogon" below).
; If the value of the parameter "ValidatedLogon" is 0, then
; the LogonDomain is optional. If the value of the parameter
; "ValidatedLogon" is 1, then the parameter "LogonDomain" is
; required. "LogonDomain" is required when "ValidatedLogon"
; is 1 to ensure setup has access to the domain and
; that the user can log on when setup has finished.
ValidatedLogon=0
; This parameter specifies if a logon to Windows95 is to
; be validated in a Windows NT domain.
; 0 = Do not validate the logon with a Windows NT domain.
; 1 = Validate the logon with a Windows NT domain.
; The parameter "LogonDomain" (above) must have a value.
[MSTCP]
; This section specifies information to install
; Microsoft TCP/IP*.
DHCP=1
; This parameter specifies if TCP/IP should be configured
; to use DHCP.
; 0 = Do not use DHCP.
; 1 = Use DHCP.
;IPAddress=128.128.128.128
; This parameter sets the IP address if DHCP is disabled.
;IPMask=255.255.255.0
; This parameter sets the IP subnet mask if DHCP is disabled.
;DNS=1
; This parameter specifies if DNS name resolution is to
; be used.
; 0 = Do not use DNS name resolution.
; 1 = Use DNS name resoluiton.
;WINS=1
; This parameter specifies if WINS for NetBIOS name
; resolution is to be used.
; 0 = Do not use WINS for NetBIOS name resolution.
; 1 = Use WINS for NetBIOS name resolution.
;DNSServers=128.128.128.128
; This parameter specifies a comma separated list of DNS
; servers to use. The servers are tried in order.
;Domain=DomainName
; This parameter specifies the domain the computer is in.
;Hostname=ComputerName
; This parameter specifies the DNS hostname for the computer.
;Gateways=128.128.128.128
; This parameter specifies a comma separated list of IP gateways.
; The IP gateways are tried in order.
;PrimaryWINS=128.128.128.128
; This parameter specifies the primary WINS name server.
;SecondaryWINS=128.128.128.128
; This parameter specifies the secondary WINS name server.
[NWSERVER]
; This section contains information for installing
; File and Printer Sharing for NetWare networks*.
BrowseMaster=1
; This parameter specifies if the computer has File and
; Printer Sharing for NetWare networks can be elected
; browse master.
; 0 = The computer with File and
; Printer Sharing for NetWare networks can not
; be elected browse master.
; 1 = The computer with File and
; Printer Sharing for NetWare networks can
; be a browse master.
; 2 = The computer with File and
; Printer Sharing for NetWare networks is
; the preferred browse master.
Use_SAP=0
; This parameter specifies if the computer with File and
; Printer Sharing for NetWare networks will use
; Server Advertising Protocol browsing. If Server
; Advertising Protocol is used, the computer with
; File and Printer Sharing for NetWare networks can
; be seen by a NetWare client but the computer will
; not appear in the Network Neighborhood.
; 0 = Do not use Server Advertising Protocol browsing.
; 1 = Use Server Advertising Protocol browsing.
[VSERVER]
; This section contains information for installing
; File and Printer Sharing for Microsoft Networks.
LMAnnounce=1
; This parameter specifies that if the computer has Microsoft
; File and Printer Sharing, the computer will
; announce itself to LAN Manager computers that are
; present on the network.
; 0 = The computer will not announce itself to the
; LAN Manager computers present on the network.
; 1 = The computer will announce itself to the
; LAN Manager computers present on the network.
MaintainServerList=0
; This parameter specifies the behavior of the computer in a browse
; master electon if that if the computer has Microsoft
; File and Printer sharing.
; 0 = The computer with Microsoft File and Printer sharing
; can not be browse master.
; 1 = The computer with Microsoft File and Printer sharing
; is the browse master.
; 2 = The computer with Microsoft File and Printer sharing
; can be the browse master if required.
[OptionalComponents]
; This section contains the optional components that
; can be installed on Windows95. The optional
; components dialog box that appears in Windows95
; during setup has the same parameters that are
; in this section. The value for each parameter in this section
; is 0 or 1.
; 0 = Informs setup NOT to install this option.
; 1 = Informs setup TO install this option.
"Accessibility Options"=0
"Briefcase"=0
"Calculator"=1
"Character Map"=0
"Clipboard Viewer"=0
"Desktop Wallpaper"=0
"Document Templates"=1
"Games"=0
"Mouse Pointers"=0
"Net Watcher"=0
"Object Packager"=1
"Online User's Guide"=0
"Paint"=1
"Quick View"=0
"System Monitor"=0
"System Resource Meter"=0
"Windows 95 Tour"=0
"WordPad"=1
"Dial-Up Networking"=0
"Direct Cable Connection"=0
"HyperTerminal"=1
"Phone Dialer"=1
"Backup"=0
"Defrag"=1
"Disk compression tools"=1
"Microsoft Exchange"=0
"Microsoft Mail Services"=0
"Microsoft Fax Services"=0
"Microsoft Fax Viewer"=0
"Audio Compression"=1
"CD Player"=1
"Jungle Sound Scheme"=0
"Media Player"=1
"Musica Sound Scheme"=0
"Robotz Sound Scheme"=0
"Sample Sounds"=0
"Sound Recorder"=1
"Utopia Sound Scheme"=0
"Video Compression"=1
"Volume Control"=1
"Additional Screen Savers"=0
"Flying Windows"=1
"The Microsoft Network"=0
[Printers]
; This section is used to install one or more printers.
; If this section is left blank, the user is not
; asked to select a printer the first time that
; Windows95 is run.
; To install a printer, follow the following format:
; <printer name> = <driver model>,<port>
; <printer name> = a string in quotes that does not
; contain \ , ; =
; <driver model> = a string in quotes that is the
; driver name under Windows95.
; <port> = the port the printer is connected
; to the computer or the unc path
; to a network printer.
: Example : A printer to be called "myprinter" whose
; driver model is "myprinter driver" and
; is connected to LPT1.
;
; "myprinter" = "myprinter driver",LPT1
; * OTHER PRODUCT AND CORPORATE NAMES MAY BE TRADEMARKS
; OF OTHER COMPANIES AND ARE USED ONLY FOR EXPLANATION
; AND TO THE OWNERS' BENEFIT, WITHOUT INTENT TO INFRINGE.
[Install]
DelReg=Delete.inbox.icon
CopyFiles=Inf.Copy
[Inf.Copy]
net82557.inf
[DestinationDirs]
Inf.Copy=17
[load_inf]
net82557.inf
[Delete.inbox.icon]
HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace\{00020D75-000-C000-000000000046},,,,,,
HKLM,SOFTWARE\Microsoft\Windows\CurrentVersion\explorer\Desktop\NameSpace\{00020D76-000-C000-000000000046},,,,,,