home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1998 September
/
VPR9809B.ISO
/
BIOS
/
shuttle
/
patch20a
/
README.TXT
< prev
Wrap
Text File
|
1998-07-04
|
3KB
|
65 lines
ReadMe File for the Shuttle Mainboard Patch Program (Windows 95)
Version 2.0a
May 13, 1998
I. Introduction
================
In Windows 95 version OSR2.0 or earlier, some devices from the Intel 430TX,
440LX or AMD-640 chipsets mainboards cannot be correctly recognised and the
drivers for these devices were not included too. So after installation of
the Windows 95, there will always be a QUESTION MARK next to these
unrecognised devices. Indicating that the the driver is not installed or
the device is not working properly. Unrecognised devices are:
Intel 430TX, 440LX/EX, 440BX chipsets:
82439TX, 82443LX/EX, 82443BX Host to PCI Bridge
82371xB Power Management Controller
82371xB PCI to ISA Bridge
(Optional) 82371xB PCI to USB Universal Host Controller
VIA / AMD-640 chipsets:
VIA VPX97 Host to PCI Bridge
VIA VP3 Host to PCI Bridge
PCI to ISA Bridge
AMD-645 Host to PCI Bridge
Power Management Controller
(Optional) PCI to USB Universal Host Controller
The problem is that Windows 95 OSR2.0 or earlier version, were released
before the 430TX, 440LX and 640 chipsets hit the market. So these earlier
version of the OS, do not have the correct drivers information build-in.
In order to resolve this problem, we are offering this patch program, to
allow Windows 95 to correctly detect the devices. After installing this
program, you will find that both of these devices show they are working
properly.
*** Note: Windows 98 does not need to patch.
II. Files
=================
The files are:
-- README.TXT - This ReadMe file.
-- PATCH.EXE - This Program file
III. Installation
=================
Step 1.) Explore the PATCH.EXE.
Step 2.) Run PATCH.EXE in Windows 95 environment.
Step 3.) You can set the check-box in the middle to determine patch
implementation for USB is included or not. (Default is checked)
Step 4.) Select 'Run Patch' to implement patch.
Step 5.) Windows 95 will display messages as patch finished, Press 'OK'
button to reboot.
Step 6.) When Windows 95 restarted, it will display messages that it had
detected various new hardware components in the system, and
proceed with its own installation procedure. Finally when
Windows 95 complete its bootup procedure, check the Device
Manager again on System of Control Panel. You will see that
all devices show it is working normally.
===========================================================
Developed by Shuttle
Copyright (c) 1997, 1998 Shuttle Inc.
All Rights Reserved.