home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1997 March
/
VPR9703B.ISO
/
driver
/
novell
/
nwpatch
/
server
/
nw312j
/
core.os
/
tcp188j.exe
/
TRAPTARG.CFG
< prev
Wrap
Text File
|
1993-03-17
|
2KB
|
45 lines
###########################################################
# traptarg.cfg
#
# Snmp Agent Trap Target (Destination) Configuration
#
# This file specifies all managers that are to receive
# snmp trap messages generated by the Snmp Agent (snmp.nlm)
#
# File Format:
#
# Protocol <name>
# Specifies the beginning of a list of names or
# address of managers to which to send traps using the
# protocol specified by <name> if that protocol is
# registered as a service provider to the snmp agent.
#
# All destinations must be preceeded by white space
# Each destination must be listed on a separate Line
#
# The Protocol keyword, left justified, signifies the
# start of a new protocol section.
#
# Comments are preceeded by the hash mark, and proceed
# to the end of the line
#
###########################################################
Protocol IPX
# In this section you can put SNMP managers that want to receive
# traps from the local node over IPX. Managers can be identified
# by NetWare service name (a NetWare file server name, for example)
# or by IPX address. To specify by IPX address, use the following
# format:
# IPX Network Number: MAC Address
#
# for example, c9990111:00001B555555
Protocol UDP
# In this section you can put SNMP managers that want to receive
# traps from the local node over UDP. Use either IP address or
# logical name. (If you use a logical name be sure the name and its
# corresponding ip address appear in the sys:etc\hosts file.)
# By default, the local node sends traps at least to itself.
127.0.0.1 # send traps to the loopback address