home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
DOS/V Power Report 1997 March
/
VPR9703B.ISO
/
driver
/
canopus
/
nt
/
3dv_nta
/
3dv_nta.lzh
/
OEMSETUP.INF
next >
Wrap
INI File
|
1996-06-07
|
16KB
|
480 lines
;-----------------------------------------------------------------------
[Identification]
OptionType = VIDEO
;-----------------------------------------------------------------------
[LanguagesSupported]
ENG
;-----------------------------------------------------------------------
[Options]
"Canopus S3DV 640x480x8, 60 Hz" = PW3D, 8, 640, 480, 60, ""
;-----------------------------------------------------------------------
[MiniportDrivers]
PW3D = !SERVICE_KERNEL_DRIVER, Video, !SERVICE_ERROR_IGNORE, 33, {PW3D}, 0, %SystemRoot%\System32\IoLogMsg.dll , 7
;-----------------------------------------------------------------------
[OptionsTextENG]
"Canopus S3DV 640x480x8, 60 Hz" = "Power Window 3DV"
;---------------------------------------------------------------------------
[Identify]
;
;
read-syms Identification
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
;------------------------------------------------------------------------
; 2. ReturnOptions:
;
; DESCRIPTION: To return the option list supported by this INF and the
; localised text list representing the options.
;
;
; INPUT: $($0): Language used. ( ENG | FRN | ... )
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE
; STATUS_FAILED
;
; $($R1): Option List
; $($R2): Option Text List
;------------------------------------------------------------------------
[ReturnOptions]
;
;
set Status = STATUS_FAILED
set OptionList = {}
set OptionTextList = {}
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
goto returnoptions
else
set Status = STATUS_NOLANGUAGE
goto finish_ReturnOptions
endif
;
; form a list of all the options and another of the text representing
;
returnoptions = +
set OptionList = ^(Options, 0)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
finish_ReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
;---------------------------------------------------------------------------
; MapToSupportedOption
;
; DESCRIPTION: To map a hardware detected option to the NT Supported
; option which represents it.
;
; INPUT: $($0): Option
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL
; $($R1): Mapped Option
;
;---------------------------------------------------------------------------
[MapToSupportedOption]
;
set Status = STATUS_FAILED
set MappedOption = $($0)
;
; If the option is one we can support using one of our standard options
; then map it to the standard option else map it to the default option
; which is VGA.
;
set OptionList = ^(MapOfOptions, 0)
ifcontains $($0) in $(OptionList)
set MappedOption = #(MapOfOptions, $($0), 1)
else
set MappedOption = "VGA"
endif
set Status = STATUS_SUCCESSFUL
Return $(Status) $(MappedOption)
[ServicesEntry]
CurrentEntry = "" ? $(!LIBHANDLE) GetDevicemapValue Video \Device\Video0
;
; InstallOption:
;
; FUNCTION: To copy files representing Options
; To configure the installed option
; To update the registry for the installed option
;
; INPUT: $($0): Language to use
; $($1): OptionID to install
; $($2): SourceDirectory
; $($3): AddCopy (YES | NO)
; $($4): DoCopy (YES | NO)
; $($5): DoConfig (YES | NO)
;
; OUTPUT: $($R0): STATUS: STATUS_SUCCESSFUL |
; STATUS_NOLANGUAGE |
; STATUS_USERCANCEL |
; STATUS_FAILED
;
[InstallOption]
;
; Set default values for
;
set Status = STATUS_FAILED
set DrivesToFree = {}
;
; extract parameters
;
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
;
; Check if the language requested is supported
;
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
else
set Status = STATUS_NOLANGUAGE
goto finish_InstallOption
endif
read-syms Strings$($0)
;
; check to see if Option is supported.
;
set OptionList = ^(Options, 0)
ifcontains $(Option) in $(OptionList)
else
goto finish_InstallOption
endif
set OptionList = ""
;
; Option has been defined already
;
set MiniportDriver = #(Options, $(Option), 1)
set BitsPerPel = #(Options, $(Option), 2)
set XResolution = #(Options, $(Option), 3)
set YResolution = #(Options, $(Option), 4)
set VRefresh = #(Options, $(Option), 5)
set BoardType = #(Options, $(Option), 6)
set Type = $(#(MiniportDrivers, $(MiniportDriver), 1))
set Group = #(MiniportDrivers, $(MiniportDriver), 2)
set ErrorControl = $(#(MiniportDrivers, $(MiniportDriver), 3))
set Tag = #(MiniportDrivers, $(MiniportDriver), 4)
set InstalledDisplays = #(MiniportDrivers, $(MiniportDriver), 5)
set VgaCompatible = #(MiniportDrivers, $(MiniportDriver), 6)
set EventMessageFile = #(MiniportDrivers, $(MiniportDriver), 7)
set TypesSupported = #(MiniportDrivers, $(MiniportDriver), 8)
read-syms ServicesEntry
detect ServicesEntry
installtheoption = +
;
; Code to add files to copy list
;
ifstr(i) $(AddCopy) == "YES"
set DoActualCopy = NO
set FileToCheck = #(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\drivers\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
goto addfiles
endif
ForListDo $(InstalledDisplays)
set FileToCheck = #(Files-DisplayDLLs, $($), 2)
LibraryProcedure STATUS,$(!LIBHANDLE),CheckFileExistance $(!STF_WINDOWSSYSPATH)"\"$(FileToCheck)
ifstr(i) $(STATUS) == NO
set DoActualCopy = YES
endif
EndForListDo
addfiles = +
ifstr(i) $(DoActualCopy) == NO
shell "subroutn.inf" DriversExist $($0) $(String1)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "VIDEO.INF: shelling DriversExist failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_CURRENT
else-ifstr(i) $($R0) == STATUS_NEW
set DoActualCopy = YES
else-ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "VIDEO.INF: User cancelled video installation"
goto finish_InstallOption
else
Debug-Output "VIDEO.INF: Error reported in DriversExist routine in SUBROUTN.INF"
goto finish_InstallOption
endif
endif
ifstr(i) $(DoActualCopy) == YES
shell "subroutn.inf" DoAskSourceEx $(SrcDir) $(String2)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "VIDEO.INF: shelling DoAskSourceEx failed"
goto finish_InstallOption
endif
ifstr(i) $($R0) == STATUS_SUCCESSFUL
set SrcDir = $($R1)
ifstr(i) $($R2) != ""
set DrivesToFree = >($(DrivesToFree), $($R2))
endif
else
Debug-Output "VIDEO.INF: User cancelled asking source."
goto finish_InstallOption
endif
install Install-AddCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) != "STF_SUCCESS"
Debug-Output "VIDEO.INF: Adding video files to copy list failed"
goto finish_InstallOption
endif
else
set DoCopy = NO
endif
endif
ifstr(i) $(DoCopy) == "YES"
read-syms ProgressCopy$($0)
install Install-DoCopyOption
ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_FAILURE"
Debug-Output "Copying files failed"
goto finish_InstallOption
else-ifstr(i) $(STF_INSTALL_OUTCOME) == "STF_USERQUIT"
set Status = STATUS_USERCANCEL
goto finish_InstallOption
endif
endif
ifstr(i) $(DoConfig) == "YES"
;
; first run a privilege check on modifying the setup node
;
shell "registry.inf" CheckSetupModify
ifint $($ShellCode) != $(!SHELL_CODE_OK)
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
goto finish_InstallOption
endif
;
; first make a new video entry, the entry is created automatically
; enabled
;
set ServiceNode = $(MiniportDriver)
set ServiceBinary = %SystemRoot%\System32\drivers\#(Files-DisplayMiniportDrivers, $(MiniportDriver), 2)
set ServicesValues = { +
{Type, 0, $(!REG_VT_DWORD), $(Type) }, +
{Start, 0, $(!REG_VT_DWORD), $(!SERVICE_SYSTEM_START) }, +
{Group, 0, $(!REG_VT_SZ), $(Group) }, +
{ErrorControl, 0, $(!REG_VT_DWORD), $(ErrorControl) }, +
{Tag, 0, $(!REG_VT_DWORD), $(Tag) }, +
{BinaryPathName, 0, $(!REG_VT_EXPAND_SZ), $(ServiceBinary) } +
}
set ParametersValues = { +
{InstalledDisplayDrivers, 0, $(!REG_VT_MULTI_SZ), $(InstalledDisplays) }, +
{VgaCompatible, 0, $(!REG_VT_DWORD), $(VgaCompatible) }, +
{DefaultSettings.BitsPerPel, 0, $(!REG_VT_DWORD), $(BitsPerPel) }, +
{DefaultSettings.XResolution, 0, $(!REG_VT_DWORD), $(XResolution) }, +
{DefaultSettings.YResolution, 0, $(!REG_VT_DWORD), $(YResolution) } +
}
ifstr(i) $(VRefresh) != ""
set VRefreshValue = {DefaultSettings.VRefresh, 0, $(!REG_VT_DWORD), $(VRefresh)}
set ParametersValues = >($(ParametersValues), $(VRefreshValue))
endif
ifstr(i) $(BoardType) != ""
set PC98BoardTypeValue = {PC98, 0, $(!REG_VT_DWORD), $(BoardType)}
set ParametersValues = >($(ParametersValues), $(PC98BoardTypeValue))
endif
set DeviceValues = {}
set EventLogValues = { +
{EventMessageFile, 0, $(!REG_VT_EXPAND_SZ), $(EventMessageFile) }, +
{TypesSupported, 0, $(!REG_VT_DWORD), $(TypesSupported) } +
}
shell "registry.inf" MakeServicesEntry $(ServiceNode) +
$(ServicesValues) +
$(ParametersValues) +
$(DeviceValues) +
$(EventLogValues) +
Device0
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't execute MakeServicesEntry in registry.inf"
goto finish_InstallOption
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "MakeServicesEntry failed for video"
goto finish_InstallOption
endif
;
;
; then disable the previous video entry
;
ifstr(i) $(CurrentEntry) != $(MiniportDriver)
ifstr(i) $(CurrentEntry) != VGA
ifstr(i) $(CurrentEntry) != ""
shell "registry.inf" ModifyServicesEntry $(CurrentEntry) $(!SERVICE_DISABLED)
ifint $($ShellCode) != $(!SHELL_CODE_OK)
Debug-Output "Couldn't find DisableServicesEntry in registry.inf"
goto errorconfig
endif
ifstr(i) $($R0) != STATUS_SUCCESSFUL
Debug-Output "DisableServices entry failed"
endif
endif
endif
endif
goto configdone
errorconfig = +
ifstr(i) $(CurrentEntry) != $(MiniportDriver)
shell "registry.inf" ModifyServicesEntry $(MiniportDriver) $(!SERVICE_DISABLED)
ifstr(i) $(CurrentEntry) != ""
shell "registry.inf" ModifyServicesEntry $(CurrentEntry) $(!SERVICE_SYSTEM_START)
endif
endif
goto finish_InstallOption
configdone = +
endif
set Status = STATUS_SUCCESSFUL
finish_InstallOption = +
ForListDo $(DrivesToFree)
LibraryProcedure STATUS,$(!LIBHANDLE), DeleteNetConnection $($) "TRUE"
EndForListDo
Return $(Status)
[Install-AddCopyOption]
set STF_VITAL = ""
;
; Add the files to the copy list
;
AddSectionKeyFileToCopyList Files-DisplayMiniportDrivers +
$(MiniportDriver) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)\drivers
ForListDo $(InstalledDisplays)
AddSectionKeyFileToCopyList Files-DisplayDLLs +
$($) +
$(SrcDir) +
$(!STF_WINDOWSSYSPATH)
EndForListDo
exit
[Install-DoCopyOption]
;
; Copy files in the copy list
;
CopyFilesInCopyList
exit
;**************************************************************************
; PROGRESS GUAGE VARIABLES
;**************************************************************************
[ProgressCopyENG]
ProCaption = "Windows NT セットアップ"
ProCancel = "キャンセル"
ProCancelMsg = "Windows NT は正しく組み込まれていません。"+
"ファイルのコピーを中止しますか?"
ProCancelCap = "セットアップ メッセージ"
ProText1 = "コピー元:"
ProText2 = "コピー先:"
[StringsENG]
String1 = "ディスプレイ"
String2 = "Windows NT ディスプレイ ドライバ ファイルへのフル パスを入力してくだ"+
"さい。セットアップ フロッピー ディスクからファイルを組み込む場合は、"+
"ドライブ パス (A:\ など) を入力してください。"+
"入力したら[続行]ボタンをクリックしてください。"
;-----------------------------------------------------------------------
; SOURCE MEDIA DESCRIPTIONS
; -------------------------
; The OEM should list all the diskette labels here. The source media
; description is used during copy to prompt the user for a diskette
; if the source is diskettes.
;
; Use 1 = "Diskette 1 Label" , TAGFILE = disk1
; 2 = "Diskette 2 Label" , TAGFILE = disk2
; ...
;-----------------------------------------------------------------------
;--------------------------------------------------------------------
; THE SECTIONS BELOW SHOULD BE AUTOMATICALLY GENERATED BY THE EXCEL
; SPREAD SHEETS
;--------------------------------------------------------------------
[Source Media Descriptions]
1 = "", TAGFILE = disk1
[Files-DisplayDLLs]
PW3D = 1, PW3D.DLL, SIZE=98816
[Files-DisplayMiniportDrivers]
PW3D = 1, PW3D.SYS, SIZE=46560