138 The system tried to join a drive\nto a directory on a joined drive.
139 The system tried to substitute a\ndrive to a directory on a substituted drive.
140 The system tried to join a drive to\na directory on a substituted drive.
141 The system tried to SUBST a drive\nto a directory on a joined drive.
142 The system cannot perform a JOIN or SUBST at this time.
143 The system cannot join or substitute a\ndrive to or for a directory on the same drive.
144 hxo0{hxg00phxg00B00~0[00.
145 hxL0zzg0o0B00~0[00.
146 The path specified is being used in\na substitute.
147 S0n0z0覯tY00_00n0p}L0ASRg0o0B00~0[00.
148 S0n0Bfケpg0o00c喙U00_0}o0)R(ug0M0~0[00.
149 An attempt was made to join\nor substitute a drive for which a directory\non the drive is the target of a previous\nsubstitute.
150 System trace information was not specified in your\nCONFIG.SYS file, or tracing is disallowed.
151 The number of specified semaphore events for\nDosMuxSemWait is not correct.
152 DosMuxSemWait did not execute; too many semaphores\nare already set.
153 The DosMuxSemWait list is not correct.
154 The volume label you entered exceeds the\n11 character limit. The first 11 characters were written\nto disk. Any characters that exceeded the 11 character limit\nwere automatically deleted.
155 ヨNn0}o0\Obg0M0~0[00.
156 The recipient process has refused the signal.
157 ~xL0稙k0テ^トhU00f0D00_000oxY00S0h0L0g0M0~0[00.
158 ~xo0稙k0qoxU00f0D0~0Y0.
159 }oIDn0q}L0燈U芯0f0D0~0Y0.
160 The argument string passed to DosExecPgm is not correct.
161 c喙U00_0}L0!qケRg0Y0.
162 A signal is already pending.
164 |}k0S00薇
Nn0}oL0\Obg0M0~0[00.
167 Unable to lock a region of a file.
170 ♂BlU00_0p}o0O(u-Ng0Y0.
173 A lock request was not outstanding for the supplied cancel region.
174 The file system does not support atomic changes to the lock type.
180 The system detected a segment number that was not correct.
182 uphx|}o0 %1 0歇Lg0M0~0[00.
183 Cannot create a file when that file already exists.
186 The flag passed is not correct.
187 The specified system semaphore name was not found.
196 The operating system cannot run this\napplication program.
197 The operating system is not presently\nconfigured to run this application.
198 INVALID_SEGDPL: uphx|}o0 %1 0歇Lg0M0~0[00.
199 The operating system cannot run this\napplication program.
200 zp~x064KB薇
Nk0畸5_g0M0~0[00.
201 RELOC_CHAIN_XEEDS_SEGLIM: %1 0歇Lg0M0~0[00.
202 INFLOOP_IN_RELOC_CHAIN: %1 0歇Lg0M0~0[00.
203 The system could not find the environment\noption that was entered.
205 No process in the command subtree has a\nsignal handler.
206 grT~0_0o0畸5_P[L0w漂0N0~0Y0.
207 x2n0}oxo0O(u-Ng0Y0.
208 The global filename characters, * or ?, are entered\nincorrectly or too many global filename characters are specified.
209 The signal being posted is not correct.
210 The signal handler cannot be set.
212 The segment is locked and cannot be reallocated.
214 Too many dynamic link modules are attached to this\nprogram or dynamic link module.
215 Can't nest calls to LoadModule.
230 The pipe state is invalid.
231 All pipe instances are busy.
232 The pipe is being closed.
233 No process is on the other end of the pipe.
234 More data is available.
240 The session was cancelled.
254 The specified extended attribute name was invalid.
255 The extended attributes are inconsistent.
259 No more data is available.
266 The Copy API cannot be used.
267 The directory name is invalid.
275 The extended attributes did not fit in the buffer.
276 The extended attribute file on the mounted file system is corrupt.
277 The extended attribute table file is full.
278 The specified extended attribute handle is invalid.
282 The mounted file system does not support extended attributes.
288 Attempt to release mutex not owned by caller.
298 Too many posts were made to a semaphore.
317 The system cannot find message for message number 0x%1\nin message file for %2.
487 Attempt to access invalid address.
534 Arithmetic result exceeded 32 bits.
535 There is a process on other end of the pipe.
536 Waiting for a process to open the other end of the pipe.
994 Access to the extended attribute was denied.
995 The I/O operation has been aborted because of either a thread exit\nor an application request.
996 Overlapped I/O event is not in a signalled state.
997 Overlapped I/O operation is in progress.
998 Invalid access to memory location.
999 Error performing inpage operation.
1001 Recursion too deep, stack overflowed.
1002 The window cannot act on the sent message.
1003 Cannot complete this function.
1004 Invalid flags.
1005 The volume does not contain a recognized file system.\nPlease make sure that all required file system drivers are loaded and that the\nvolume is not corrupt.
1006 The volume for a file has been externally altered such that the\nopened file is no longer valid.
1007 The requested operation cannot be performed in full-screen mode.
1008 An attempt was made to reference a token that does not exist.
1009 The configuration registry database is corrupt.
1010 The configuration registry key is invalid.
1011 The configuration registry key could not be opened.
1012 The configuration registry key could not be read.
1013 The configuration registry key could not be written.
1014 |}o0瑢ゥ_U00~0W0_0.
1015 |}L0ハX0f0D0~0Y0.
1016 An I/O operation initiated by the Registry failed unrecoverably.\nThe Registry could not read in, or write out, or flush, one of the files\nthat contain the system's image of the Registry.
1017 The system has attempted to load or restore a file into the Registry, but the\nspecified file is not in a Registry file format.
1018 Illegal operation attempted on a Registry key which has been marked for deletion.
1019 System could not allocate the required space in a Registry log.
1020 Cannot create a symbolic link in a Registry key that already\nhas subkeys or values.
1021 Cannot create a stable subkey under a volatile parent key.
1022 A notify change request is being completed and the information\nis not being returned in the caller's buffer. The caller now\nneeds to enumerate the files to find the changes.
1051 A stop control has been sent to a service which other running services\nare dependent on.
1117 The request could not be performed because of an I/O device error.
1118 No serial device was successfully initialized. The serial driver will unload.
1119 Unable to open a device that was sharing an interrupt request (IRQ)\nwith other devices. At least one other device that uses that IRQ\nwas already opened.
1120 A serial I/O operation was completed by another write to the serial port.\n(The IOCTL_SERIAL_XOFF_COUNTER reached zero.)
1121 A serial I/O operation completed because the time-out period expired.\n(The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
1122 No ID address mark was found on the floppy disk.
1123 Mismatch between the floppy disk sector ID field and the floppy disk\ncontroller track address.
1124 The floppy disk controller reported an error that is not recognized\nby the floppy disk driver.
1125 The floppy disk controller returned inconsistent results in its registers.
1126 While accessing the hard disk, a recalibrate operation failed, even after retries.
1127 While accessing the hard disk, a disk operation failed even after retries.
1128 While accessing the hard disk, a disk controller reset was needed, but\neven that failed.
1129 Physical end of tape encountered.
1130 Not enough server storage is available to process this command.
1131 A potential deadlock condition has been detected.
1132 The base address or the file offset specified does not have the proper\nalignment.
1200 The specified device name is invalid.
1201 The device is not currently connected but it is a remembered connection.
1224 The requested operation cannot be performed on a file with a user mapped section open.
1225 The remote system refused the network connection.
1226 The network connection was gracefully closed.
1227 The network transport endpoint already has an address associated with it.
1228 An address has not yet been associated with the network endpoint.
1229 An operation was attempted on a non-existent network connection.
1230 An invalid operation was attempted on an active network connection.
1231 The remote network is not reachable by the transport.
1232 The remote system is not reachable by the transport.
1233 The remote system does not support the transport protocol.
1234 No service is operating at the destination network endpoint\non the remote system.
1235 The request was aborted.
1236 The network connection was aborted by the local system.
1300 Not all privileges referenced are assigned to the caller.
1301 Some mapping between account names and security IDs was not done.
1302 No system quota limits are specifically set for this account.
1303 No encryption key is available. A well-known encryption key was returned.
1304 The NT password is too complex to be converted to a LAN Manager\npassword. The LAN Manager password returned is a NULL string.
1305 The revision level is unknown.
1306 Indicates two revision levels are incompatible.
1307 This security ID may not be assigned as the owner of this object.
1308 This security ID may not be assigned as the primary group of an object.
1309 An attempt has been made to operate on an impersonation token\nby a thread that is not currently impersonating a client.
1310 The group may not be disabled.
1311 There are currently no logon servers available to service the logon\nrequest.
1312 A specified logon session does not exist. It may already have\nbeen terminated.
1313 A specified privilege does not exist.
1314 A required privilege is not held by the client.
1315 The name provided is not a properly formed account name.
1316 The specified user already exists.
1317 The specified user does not exist.
1318 The specified group already exists.
1319 The specified group does not exist.
1320 Either the specified user account is already a member of the specified\ngroup, or the specified group cannot be deleted because it contains\na member.
1321 The specified user account is not a member of the specified group account.
1322 The last remaining administration account cannot be disabled\nor deleted.
1323 Unable to update the password. The value provided as the current\npassword is incorrect.
1324 Unable to update the password. The value provided for the new password\ncontains values that are not allowed in passwords.
1325 Unable to update the password because a password update rule has been\nviolated.
1326 Logon failure: unknown user name or bad password.
1327 Logon failure: user account restriction.
1328 Logon failure: account logon time restriction violation.
1329 Logon failure: user not allowed to log on to this computer.
1330 Logon failure: the specified account password has expired.
1331 Logon failure: account currently disabled.
1332 No mapping between account names and security IDs was done.
1333 Too many local user identifiers (LUIDs) were requested at one time.
1334 No more local user identifiers (LUIDs) are available.
1335 The subauthority part of a security ID is invalid for this particular use.
1336 The access control list (ACL) structure is invalid.
1337 The security ID structure is invalid.
1338 The security descriptor structure is invalid.
1340 The inherited access control list (ACL) or access control entry (ACE)\ncould not be built.
1341 The server is currently disabled.
1342 The server is currently enabled.
1343 The value provided was an invalid value for an identifier authority.
1344 No more memory is available for security information updates.
1345 The specified attributes are invalid, or incompatible with the\nattributes for the group as a whole.
1346 Either a required impersonation level was not provided, or the\nprovided impersonation level is invalid.
1347 Cannot open an anonymous level security token.
1348 The validation information class requested was invalid.
1349 The type of the token is inappropriate for its attempted use.
1350 Unable to perform a security operation on an object\nwhich has no associated security.
1351 Indicates a Windows NT Advanced Server could not be contacted or that\nobjects within the domain are protected such that necessary\ninformation could not be retrieved.
1352 The security account manager (SAM) or local security\nauthority (LSA) server was in the wrong state to perform\nthe security operation.
1353 The domain was in the wrong state to perform the security operation.
1354 This operation is only allowed for the Primary Domain Controller of the domain.
1355 The specified domain did not exist.
1356 The specified domain already exists.
1357 An attempt was made to exceed the limit on the number of domains per server.
1358 Unable to complete the requested operation because of either a\ncatastrophic media failure or a data structure corruption on the disk.
1359 The security account database contains an internal inconsistency.
1360 Generic access types were contained in an access mask which should\nalready be mapped to non-generic types.
1361 A security descriptor is not in the right format (absolute or self-relative).
1362 The requested action is restricted for use by logon processes\nonly. The calling process has not registered as a logon process.
1363 Cannot start a new logon session with an ID that is already in use.
1364 A specified authentication package is unknown.
1365 The logon session is not in a state that is consistent with the\nrequested operation.
1366 The logon session ID is already in use.
1367 A logon request contained an invalid logon type value.
1368 Unable to impersonate via a named pipe until data has been read\nfrom that pipe.
1369 The transaction state of a Registry subtree is incompatible with the\nrequested operation.
1370 An internal security database corruption has been encountered.
1371 Cannot perform this operation on built-in accounts.
1372 Cannot perform this operation on this built-in special group.
1373 Cannot perform this operation on this built-in special user.
1374 The user cannot be removed from a group because the group\nis currently the user's primary group.
1375 The token is already in use as a primary token.
1376 The specified local group does not exist.
1377 The specified account name is not a member of the local group.
1378 The specified account name is already a member of the local group.
1379 The specified local group already exists.
1380 Logon failure: the user has not been granted the requested\nlogon type at this computer.
1381 The maximum number of secrets that may be stored in a single system has been\nexceeded.
1382 The length of a secret exceeds the maximum length allowed.
1383 The local security authority database contains an internal inconsistency.
1384 During a logon attempt, the user's security context accumulated too many\nsecurity IDs.
1385 Logon failure: the user has not been granted the requested logon type\nat this computer.
1386 A cross-encrypted password is necessary to change a user password.
1387 A new member could not be added to a local group because the member does\nnot exist.
1388 A new member could not be added to a local group because the member has the\nwrong account type.
1389 Too many security IDs have been specified.
1390 A cross-encrypted password is necessary to change this user password.
1391 Indicates an ACL contains no inheritable components
1392 The file or directory is corrupt and non-readable.
1393 The disk structure is corrupt and non-readable.
1394 There is no user session key for the specified logon session.
1400 Invalid window handle.
1401 Invalid menu handle.
1402 Invalid cursor handle.
1403 Invalid accelerator table handle.
1404 Invalid hook handle.
1405 Invalid handle to a multiple-window position structure.
1406 Cannot create a top-level child window.
1407 Cannot find window class.
1408 Invalid window, belongs to other thread.
1409 Hot key is already registered.
1410 Class already exists.
1411 Class does not exist.
1412 Class still has open windows.
1413 Invalid index.
1414 Invalid icon handle.
1415 Using private DIALOG window words.
1416 The listbox identifier was not found.
1417 No wildcards were found.
1418 Thread does not have a clipboard open.
1419 Hot key is not registered.
1420 The window is not a valid dialog window.
1421 Control ID not found.
1422 Invalid message for a combo box because it does not have an edit control.
1423 The window is not a combo box.
1424 Height must be less than 256.
1425 Invalid device context (DC) handle.
1426 Invalid hook procedure type.
1427 Invalid hook procedure.
1428 Cannot set non-local hook without a module handle.
1429 This hook procedure can only be set globally.
1430 The journal hook procedure is already installed.
1431 The hook procedure is not installed.
1432 Invalid message for single-selection listbox.
1433 LB_SETCOUNT sent to non-lazy listbox.
1434 This list box does not support tab stops.
1435 Cannot destroy object created by another thread.
1436 Child windows cannot have menus.
1437 The window does not have a system menu.
1438 Invalid message box style.
1439 Invalid system-wide (SPI_*) parameter.
1440 Screen already locked.
1441 All handles to windows in a multiple-window position structure must\nhave the same parent.
1442 The window is not a child window.
1443 Invalid GW_* command.
1444 Invalid thread identifier.
1445 Cannot process a message from a window that is not a multiple document\ninterface (MDI) window.
1446 Popup menu already active.
1447 The window does not have scroll bars.
1448 Scroll bar range cannot be greater than 0x7FFF.
1449 Cannot show or remove the window in the way specified.
1500 The event log file is corrupt.
1501 No event log file could be opened, so the event logging service did not start.
1502 The event log file is full.
1503 The event log file has changed between reads.
1700 The string binding is invalid.
1701 The binding handle is not the correct type.
1702 The binding handle is invalid.
1703 The RPC protocol sequence is not supported.
1704 The RPC protocol sequence is invalid.
1705 The string universal unique identifier (UUID) is invalid.
1706 The endpoint format is invalid.
1707 The network address is invalid.
1708 No endpoint was found.
1709 The timeout value is invalid.
1710 The object universal unique identifier (UUID) was not found.
1711 The object universal unique identifier (UUID) has already been registered.
1712 The type universal unique identifier (UUID) has already been registered.
1713 The RPC server is already listening.
1714 No protocol sequences have been registered.
1715 The RPC server is not listening.
1716 The manager type is unknown.
1717 The interface is unknown.
1718 There are no bindings.
1719 There are no protocol sequences.
1720 The endpoint cannot be created.
1721 Not enough resources are available to complete this operation.
1722 The RPC server is unavailable.
1723 The RPC server is too busy to complete this operation.
1724 The network options are invalid.
1725 There is not a remote procedure call active in this thread.
1726 The remote procedure call failed.
1727 The remote procedure call failed and did not execute.
1728 A remote procedure call (RPC) protocol error occurred.
1730 The transfer syntax is not supported by the RPC server.
1732 The universal unique identifier (UUID) type is not supported.
1733 The tag is invalid.
1734 The array bounds are invalid.
1735 The binding does not contain an entry name.
1736 The name syntax is invalid.
1737 The name syntax is not supported.
1739 No network address is available to use to construct a universal\nunique identifier (UUID).
1740 The endpoint is a duplicate.
1741 The authentication type is unknown.
1742 The maximum number of calls is too small.
1743 The string is too long.
1744 The RPC protocol sequence was not found.
1745 The procedure number is out of range.
1746 The binding does not contain any authentication information.
1747 The authentication service is unknown.
1748 The authentication level is unknown.
1749 The security context is invalid.
1750 The authorization service is unknown.
1751 The entry is invalid.
1752 The server endpoint cannot perform the operation.
1753 There are no more endpoints available from the endpoint mapper.
1754 No interfaces have been exported.
1755 The entry name is incomplete.
1756 The version option is invalid.
1757 There are no more members.
1758 There is nothing to unexport.
1759 The interface was not found.
1760 The entry already exists.
1761 The entry is not found.
1762 The name service is unavailable.
1763 The network address family is invalid.
1764 The requested operation is not supported.
1765 No security context is available to allow impersonation.
1766 An internal error occurred in a remote procedure call (RPC).
1767 The RPC server attempted an integer division by zero.
1768 An addressing error occurred in the RPC server.
1769 A floating-point operation at the RPC server caused a division by zero.
1770 A floating-point underflow occurred at the RPC server.
1771 A floating-point overflow occurred at the RPC server.
1772 The list of RPC servers available for the binding of auto handles\nhas been exhausted.
1773 Unable to open the character translation table file.
1774 The file containing the character translation table has fewer than\n512 bytes.
1775 A null context handle was passed from the client to the host during\na remote procedure call.
1777 The context handle changed during a remote procedure call.
1778 The binding handles passed to a remote procedure call do not match.
1779 The stub is unable to get the remote procedure call handle.
1780 A null reference pointer was passed to the stub.
1781 The enumeration value is out of range.
1782 The byte count is too small.
1783 The stub received bad data.
1784 The supplied user buffer is not valid for the requested operation.
1785 The disk media is not recognized. It may not be formatted.
1786 The workstation does not have a trust secret.
1787 The SAM database on the Windows NT Advanced Server does not have a computer\naccount for this workstation trust relationship.
1788 The trust relationship between the primary domain and the trusted\ndomain failed.
1789 The trust relationship between this workstation and the primary\ndomain failed.
1790 The network logon failed.
1791 A remote procedure call is already in progress for this thread.
1792 An attempt was made to logon, but the network logon service was not started.
1793 The user's account has expired.
1794 The redirector is in use and cannot be unloaded.
1795 The specified printer driver is already installed.
1796 The specified port is unknown.
1797 The printer driver is unknown.
1798 The print processor is unknown.
1799 The specified separator file is invalid.
1800 The specified priority is invalid.
1801 The printer name is invalid.
1802 The printer already exists.
1803 The printer command is invalid.
1804 The specified datatype is invalid.
1805 The Environment specified is invalid.
1806 There are no more bindings.
1807 The account used is an interdomain trust account. Use your global user account or local user account to access this server.
1808 The account used is a Computer Account. Use your global user account or local user account to access this server.
1809 The account used is an server trust account. Use your global user account or local user account to access this server.
1810 The name or security ID (SID) of the domain specified is inconsistentn\nwith the trust information for that domain.
1811 The server is in use and cannot be unloaded.
1812 The specified image file did not contain a resource section.
1813 The specified resource type can not be found in the image file.
1814 The specified resource name can not be found in the image file.
1815 The specified resource language ID cannot be found in the image file.
1816 Not enough quota is available to process this command.
1817 No interfaces have been registered.
1818 The server was altered while processing this call.
1819 The binding handle does not contain all required information.
1820 Communications failure.
1821 The requested authentication level is not supported.
1822 No principal name registered.
1823 The error specified is not a valid Windows NT RPC error code.
1898 The group member was not found.
1899 The endpoint mapper database could not be created.
1900 The object universal unique identifier (UUID) is the nil UUID.
1901 The specified time is invalid.
1902 The specified Form name is invalid.
1903 The specified Form size is invalid
1904 The specified Printer handle is already being waited on
1905 The specified Printer has been deleted
1906 The state of the Printer is invalid
1907 The user must change his password before he logs on the first time.
1908 c喙rn0_00n0rzp0級d0Q00S0h0L0g0M0~0[00.
2202 The specified username is invalid.
2250 This network connection does not exist.
2401 This network connection has files open or requests pending.
2402 Active connections still exist.
2404 The device is in use by an active process and cannot be disconnected.