home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Vectronix 2
/
VECTRONIX2.iso
/
FILES_01
/
MB48REG.LZH
/
INSTALL.TXT
< prev
next >
Wrap
Text File
|
1994-10-05
|
3KB
|
77 lines
MasterBrowse 4.8 (w\ MasterBrowse Installation Program V.4.7)
-------------------------------------------------------------
This document explains how to install MasterBrowse; it does not
contain the documentation that explains how to use MasterBrowse, though.
That information is presented to you in the file MBROWSE.DOC after
installation.
To install the MasterBrowse Text File Viewer, please double-click
on INSTALL.APP and provide the installation program with the following
information:
Destination Path
----------------
The destination path is the folder in which MasterBrowse will
be installed. If you do not want to type the destination path, you
can use the file selector to locate it simply by double-clicking on
the editable text field.
Boot Drive
----------
This is the drive that your system boots from; it is usually
the drive that contains your accessories and \AUTO folder.
MasterBrowse Multitasking AES Client
------------------------------------
This information is only required if you have Geneva, MultiTOS,
or Mag!X. If you do not have any of these replacement operating
systems, select "None". Otherwise, select the button that corresponds
to your configuration.
Alternate Viewer
----------------
For MultiTOS and Geneva, MasterBrowse can be configured to call
an alternate viewer for picture files or special document types that
MasterBrowse cannot normally process. If you want to use this feature,
follow these four steps:
1. Click on "Install Alternate Viewer".
2. Enter the path of the alternate viewer in the
"Source Path" editable field. The files in this
path will be copied to the destination path (with
the other components of MasterBrowse).
3. Enter the filename of the alternate viewer in the
"Alternate Viewer Filename" editable field. This
information is needed so that MasterBrowse can
determine which of the files in the "Source Path"
is the alternate viewer.
4. The last step is to tell MasterBrowse which file
types should be processed by the alternate viewer.
There are twenty editable fields available for
this purpose, so even GemView can be used as an
alternate viewer.
NOTE: All information entered is case sensitive; "*.JPG"
is not the same as "*.jpg".
That is all there is to it! Click on the "Install" button,
and the installation program will immediately begin working. If
you have made an error in input, the installation program will
alert you and provide detailed instructions on how to proceed.
When the installation is complete, please reset your system so that
the changes can take effect.
-Michel Forget
Electric Storm Software
October 6, 1994