home *** CD-ROM | disk | FTP | other *** search
- MemSnoop 32 V1.07
-
- -----------------------------------------------------------------------
- Registration
- -----------------------------------------------------------------------
-
- MemSnoop 32 is shareware. You may use the program for an evaluation
- period of up to 30 days, in order to determine whether the program
- meets your needs before purchasing it. Once the evaluation period
- ends, you agree to either purchase a registered copy of the program,
- or to stop using it.
-
- The registration fee for the international version is US $10.
-
- You agree not to install or use any individual copy of the program
- on more than one computer at a time. However, you may install an
- individual copy simultaneously on one computer at work, one computer
- at home, and one portable computer, IF (and ONLY if) all computers
- are used primarily by the same individual.
-
- If you intend to use MemSnoop 32 in a network you have to purchase a
- license for every computer that uses it. Ask for discount prices if
- you want to buy a network license.
-
- To register you have to send a letter via old-fashioned mail
- containing:
-
- - The registration fee of US $10 (No money orders!)
- (If you worry about sending cash and insist on sending a money
- order, I have to charge you $20 since the bank will charge me
- about $10 for cashing the money order. Sorry about that!)
- - Your full name
- - Your email address
-
- Send it to this address:
- Malte Borsum
- Ohrberg 14
- 30982 Pattensen
- (D) Germany
-
- I will send a registered version containing your name immediately to
- your email address. Please keep in mind that it takes one to three weeks
- for a letter from America or Australia to arrive here, so please be
- patient.
-
- In the unlikely case, that you don't have an email address, I will send
- you version of MemSnoop 32 on a floppy disk. In that case please add
- US $5 for postage and packaging and include your full postal address.
-
-
- -----------------------------------------------------------------------
- Description of the displays
- -----------------------------------------------------------------------
-
- File: Current size of the swapfile in relation to its maximum size. The
- text shows the exact size.
-
- Swap: Currently swapped bytes in relation to the size of the swapfile.
- The text shows the exact amount of swapped bytes.
-
- Mem: Used physical memory in relation to the total amount of physical
- memory in your computer. The text shows the exact amount of free
- physical memory.
-
- CPU: CPU usage in the last 1.5 minutes is being shown graphically.
- Additionally the current CPU usage is displayed as text.
-
- R/W: The current read/write rates of the hard disks in your system.
-
- Resources:
- GDI: percentage of available GDI-resources
- User: percentage of available User-resources
- CPU: CPU usage (same as above)
-
- C:-Z: Used space on the corresponding drive relative to the size of
- this drive. The text shows the free space.
-
-
- -----------------------------------------------------------------------
- Configuration Dialog
- -----------------------------------------------------------------------
-
- Display-Sheet
-
- Here you can enable or disable all of the above described resource-
- meters. Enable 'show net-drives' to display net drives as well.
-
- Colors-Sheet
-
- Choose your favorite color for any of the above described resource-
- meters.
-
- Alignment-Sheet
-
- Here you can configure how the drives of your hard disk(s) will be
- displayed:
-
- 'Each drive on its own': For each drive the free space will be
- displayed relative to the size of that particular drive.
-
- 'Free space proportional to largest drive': The free space from all
- drives is displayed relative to the largest drive. So you can
- compare the free space much better.
-
- 'Proportional to largest drive (left)': The used and the free space
- of each drive will be displayed proportional to the biggest drive
- in your system. Therefore the bars for the smaller drives get
- smaller too, and the remaining space will be 'filled' with a third
- color. If you choose 'left', it will be filled at the right side
- and so you can compare the used space on the left side.
-
- 'Proportional to largest drive (right)': Same as above, with the only
- difference that the bars of the smaller drives will be aligned at
- the right side. If you choose 'right', it will be filled at the
- left side and so you can compare the free space on the right side.
-
- Drives-Sheet
-
- Choose the drives to be displayed.
-
-
- -----------------------------------------------------------------------
- Problem Solving
- -----------------------------------------------------------------------
-
- MemSnoop 32 is covered by other windows.
- -> press CTRL+Alt+Shift+S
-
- You have problems with special drives or net drives.
- -> Disable 'Show net-drives' in Configuration: Display
- Disable the corresponding drive in Configuration: Drives
-
- You have disabled all displays and now you can't find MemSnoop 32
- on your monitor.
- -> That was not very clever!
- Delete the file MemSnoop32.INI. Watch out! If you do so, the colors
- you have set will be lost.
-
-
- -----------------------------------------------------------------------
-
- Malte Borsum
- Ohrberg 14
- (D) 30982 Hannover
-
- borsum@stud.uni-hannover.de
-
- HTTP://www.stud.uni-hannover.de/~borsum/memsnoop32.html