4628 At least one of the margins you have defined will be outside the printable area and printable part of drawing may be lost during printing. Would you like TurboCAD to adjust margins for you?
4629 %s was modified. Save changes ?
4639 Cannot print with current printer setup. Check that the printer is connected properly.
4640 Run Script
4641 Add Script
4642 Open Template
4643 Library Files
4644 Template Files Location
4645 Script Files Location
4646 Backup Files Location
4647 AutoSave Files Location
4648 SymbolLibrary Files Location
4649 Drawing Files Location
4650 Raster Files
4651 Raster Files Location
4656 Templates
4657 Scripts
4658 Backups
4659 AutoSave Files
4660 SymbolLibrary Files
4661 Drawings
4662 Copying graphics...
4663 Transferring graphics...
4664 This will print only preview! Are you sure you want to print preview?
4665 This paper size is not supported by this printer! Would you like TurboCAD to adjust paper size for you?
4666 Please enter a size between %1 and %2.
4995 Not all of crop marks can be printed for this page. Do you want to continue printing?
14336 TC40_DESKTOP_CFG800
14337 TC40_DESKTOP_CFG640
14338 TC40_DESKTOP_CFG1024
14351 TC40_CONFIG_ACCESS
14352 Customize the TurboCAD user interface (menus, keyboard, and toolbars)
14353 Drag to create empty standard toolbar to a desktop
14354 Drag to create empty tabbed toolbar to a desktop
14355 Drag to create text button to a toolbar or the desktop
14356 Drag to copy button to a toolbar or the desktop
14357 Drag on or from the picker to change toolbar style or on the button to create the fly-out toolbar
14358 Drag to move button to a toolbar or the desktop. Drag the button on the sheet to remove it
14359 Are you sure you want to reset the key assignments ? This action will remove all custom key assignments at the Main level.
14360 Are you sure you want to reset the menu assignments ? This action will remove all menu changes.
14361 Are you sure you want to reset toolbars ?This action will remove current toolbars setting.
14362 Are you sure you want to reset this ? This action will remove current settings.
16590 ANSI A Size (8.5 in x 11 in)\nANSI B Size (11 in x 17 in)\nANSI C Size (17 in x 22 in)\nANSI D Size (22 in x 34 in)\nANSI E Size (34 in x 44 in)
16591 ISO A4 Size (210 mm x 297 mm)\nISO A3 Size (297 mm x 420 mm)\nISO A2 Size (420 mm x 594 mm)\nISO A1 Size (594 mm x 841 mm)\nISO A0 Size (841 mm x 1189 mm)
16592 Not a registered copy of TurboCAD
28681 Select object(s)
28929 You cannot set a layer which is not Editable as the default Layer.
28930 You cannot set a layer which is not Editable as the default Layer.
28931 Failed because selection contains graphics which are read only.
28932 How many?, I don't understand...
28933 Cannot divide an ellipse. Not implemented yet.
28934 How many? I don't understand...
28935 This circle has already been picked.
28936 Tangent circle/arc doesn't have valid tangency points.
28937 Tangent circle/arc doesn't exist.
28938 Cannot split this entity.
28939 Cannot edit this entity.
28940 Cannot extend to this entity.
28941 You cannot add entities to a Layer which is not Editable.
28942 Wrong option selection.
28943 Chamfer is not possible in this case.
28944 Wrong selection. Try to select the second segment again or use the local menu.
28945 For this case, the modification requested is not possible.
28946 These two segments belong to the same multiline so a Meet cannot be performed on them.
28947 These two segments belong to the same multiline so a Meet cannot be performed on them.
28948 These two segments belong to the same multiline so a Meet cannot be performed on them.
28949 At least one of the two chosen segments of different multilines is not a start/end segment.
28950 Cannot Meet these two segments.
28951 Meet is not possible, try again!
28952 Cannot X_Meet these two segments.
28953 A currently selected entity has lost connections to its dimensions. We recommend deleting these dimensions and re-doing them.
28954 Cannot paste block into different drawing yet.
28955 Cannot paste graphic of a block yet.
28956 Cannot paste insert of a graphic yet.
28957 At least one of the two multilines is closed. Meet is not possible, try again!
28958 You have Keep Length checked. Do you want to uncheck it?
28959 Cannot fillet or chamfer these two segments of the same multiline.Try to select the second segment again or use the local menu.
28960 Radius is too small for fillet.Try again or use the local menu.
28961 Cannot fillet these arcs.
28962 At least one of these two chosen segments of different multilines is not a start/end segment.Try to select the second segment again or use the local menu.
28963 At least one of these two multilines is closed.Explode complex entities before trying to Fillet or Chamfer.
28964 Cannot fillet or chamfer these two segments.Try to select the second segment again or use the local menu.
28965 TurboCAD will create the new drawing based on the default settings in the TCW40.INI file.
28966 The default template does not exist.
28967 Template selection cancelled.
28968 No templates were found in the location specified. Select "Program Setup: File Locations" to choose the correct directory for templates.
28971 Block is still referenced in the undo buffer. Clear Undo buffer?
28972 Layer is still referenced in the undo buffer. Clear Undo buffer?
28973 Viewport is still referenced in the undo buffer. Clear Undo buffer?
28974 Cannot insert the same file
28975 Cannot continue hatch path "By Entity" as this entity has no physical path.Try again or deselect "By Entity" and use snaps to define the path.
28976 Intersection is not found.
28977 Cannot continue measurement.Try again or use the local menu.
28978 Cannot create block from viewport(s).
32000 Define text font\nText Font\n\n
32001 Define text height\nText Height\n\n
32004 Define line styles\nPen Style\n\n
32005 Define colors\nPen Colors\n\n
32007 Define brush patterns\nBrush Pattern\n\n
32008 Define layers\nLayers\n\n
32015 Define style\nEntity Style\n\n
32028 Define pen widths\nPen Width\n\n
32768 Create a transferable block from the selection\nCreate Block\n\n
32769 Insert a library symbol\nInsert Symbol\nInsert Symbol\n\n
32770 Select and node-edit\nReshape\n\n
32771 Hatch an object or area\nHatch\n\n
34000 Edit\nSelect
36000 No snap at all, get the mouse position\nNo Snap\n\n
36001 Snap to the nearest vertex\nVertex\n\n
36002 Snap to the point on the nearest entity\nNearest on Graphic\n\n
36003 Snap to the midpoint of a line\nMiddle Point\n\n
36004 Snap to the center of an arc\nArc Center\n\n
36005 Snap to the intersection of two objects\nIntersection\n\n
36006 Snap to the ortho angle\nOrtho\n\n
36007 Snap to the nearest grid point\nGrid\n\n
36008 Snap to the quadrant point of an arc\nQuadrant Point\n\n
36009 Show the point on which the next snap works\nShow Magnetic Point\n\n