Version = 0x0701 ; Hexadecimal TBAV for Windows version number
[Language]
Added = added
Changed = changed
Removed = removed
Updated = updated
Skip = skipping...
Check = checking...
Look = looking...
Trace = tracing...
Scan = scanning...
Decrypt = decrypting...
Error = access denied!
Ok = Ok
Cancel = Cancel
Retry = Retry
Help = Help
Browse = Browse
Paths = Paths
LogFile = Log&File
Continue = &Continue
Stop = &Stop
Internal = {Internal}
Found = found
Infected = infected by
Dropper = dropper of
Damaged = damaged by
Joke = joke named
Garbage = garbage: (not a virus)
Trojan = trojan named
Probably = probably
MightBe = might be
Virus = virus
UnknownVirus= an unknown virus
HasChanged = has been changed!
NoWhatsNew = No 'What's New' files found !
BootSector = BootRecord
MBootRec = Master Boot Record drive
PartTable1 = MBR H.D. 1
PartTable2 = MBR H.D. 2
ActivePart = Active partition
Memory = Internal memory
AlwaysOnTop = Always on top
BgScanActive= TBAV for Windows is currently scanning your system by using the Background Scanning feature. Therefore, the system menu and the TBAV for Windows menu are not accesible. Should the scan process be continued ?\n\nIf you press 'No', Background Scanning will be aborted.
ScanReady = The scanning process is completed; all files appear to be clean.
ScanStop = The scanning process has been aborted; all files appear to be clean.
ScanError = Couldn't find files to scan.
ScanInf = The scanning process is completed; some files are infected or have been changed !
ScanStopInf = The scanning process has been aborted; some files are infected or have been changed !
RepeatScan = The diskette in the diskdrive has been scanned. If you want to scan another disk, please insert it in your diskdrive and press 'Yes'. Press the 'No' button to quit.\n\nDo you want to scan another disk ?
BgScanStatus= Background Scan is
BgScanPeriodmin= due within %d
BgScanPeriodsec= :%02d minute(s).
BgScanDisabled = disabled.
BgScanRunning= now scanning:
BgScanTarget = Background Scan target:
BgScanLastScan= Last scan performed at:
BgScanScanning = TBAV for Windows is scanning:
FileIOMonitor= File I/O Monitor is
AppExecTracker= Application Execution Tracker is
MightBeUnknown = might be infected by an unknown virus
ProbablyUnknown = probably infected by an unknown virus
HFlags = Heuristic flags:
SigFileError= The signature file TBSCAN.SIG has not been found.
DatFileError= The data file TBSETUP.DAT has not been found.
NetWorkRequest=Servicing network request...
NetWorkLink = Network active
NetWorkOptions=The changes you made in the network configuration only take effect if you restart TBAVWIN.
NetWorkNoAccess=The network communication directory specified in TBAV.Ini or TbNet.Ini cannot be used by TBAV for Windows. TBAV for Windows does not have full read/write access to this directory.\n\nThe interface with TBAV for Networks is now disabled.\n\nPress OK to continue.
LockMsg = Due to a possible virus infection on your PC, this computer will be rebooted and locked. Please save all your work, and press OK.
AllFilesWarning= WARNING!!\n\nYou selected the 'Non-Executable Scan' option! Since there are no viruses that only infect non-executable files, it is really sufficient to scan executable files only. Use this option only after you found at least one virus in an executable file.\n\nBe aware that because of the complex nature of the Scan module, treating data files as executable files might cause unpredictable results and false alarms may occur.\n\nDo you want to continue the scan operation ?
SetupWarning= WARNING!!\n\nYou are about to execute the setup module of TBAV for Windows, which will validate all selected programs. If some program is infected, this program will also be validated and considered a non-infected program !!\n\nDo you want to continue ?
SetupReady = The setup process is completed.
SetupStop = The setup process has been aborted.
SetupError = Couldn't find files to setup.
SetupChanged= The setup process is completed; some files have been changed !
SetupStopChanged= The setup process has been aborted; some files have been changed !
AddTargetError1= You cannot add opened folders to the target list.\n\nEither select items out of the opened folder, or close the folder.
AddTargetError2= Currently, no scan targets exist. Please select drives, directories or files out of the directory listbox, add them to the target listbox and press the scan button again.
AddTargetError3= Currently, no setup targets exist. Please select drives, directories or files out of the directory listbox, add them to the target listbox and press the setup button again.
AddTargetError4= The item %s you selected is already included in the target list, since the 'include subdirectories' options is set.
ClearTargetError0= An error occured when removing an item from the target list. You probably did not select an item in the list.
TargetNotSaved= You did not yet save the current contents of the target file. Do you want to save the target file ?\n\nPress YES to save the target file, NO to continue without saving.
DriveNotReady = The drive you selected is not ready. Please close the drive, or check your hardware.
InstallError = TBAV for Windows has not correctly been installed.\n\nPlease use the accompanying installation program to install TBAV for Windows.
Expired0 = The evaluation period of the unregistered version of TBAV for Windows has almost expired. Please register TBAV for Windows !
Expired1 = The evaluation period of the unregistered version of TBAV for Windows has expired. The item you selected is not available.
Expired2 = The evaluation period of the unregistered version of TBAV for Windows has expired. Current settings will not be saved.
OverwriteFile = The file you specified already exists.\n\nDo you want to overwrite the contents of the existing file ?
OkToDelete = Are you sure you want to delete the predefined target called %s ?
ViewFileError = An error (number %d) occured while executing the file viewer.\n\nPress OK to continue.
LockSystem = Your computer system has been locked since virus activity has been observed.
SigVersionError= The current version of the signature file (TBSCAN.SIG) cannot be used with this version of TBAV for Windows.\n\nTBAV for Windows will be aborted.
RegOnly = The unregistered version of TBAV for Windows does not support this option.\n\nCall you local ThunderBYTE distributor for registration information.
VxDUnRegisterError= Cannot unregister the TBAV for Windows file system change notifier. TBAV for Windows must remain active.\n\nPress OK to continue.
VxDNotActive = The TBAV for Windows VxD is not active. Some or all of the items in the dialog you will see next, are disabled.\n\nPress OK to continue.
SecurityError = WARNING!\n\nSomeone has tried to alter the TBAV-for-Windows security settings!\n\nTBAV-for-Windows will now exit.
WrongPassword = TBAV-for-Windows Security Error!\n\nYou entered the wrong password.\n\nPress OK to continue.
LocalTarget = local.scn
[HeurFlags]
HeurFlag_c = c No checksum / recovery information (Anti-Vir.Dat) available.
HeurFlag_X = C The checksum data does not match! File has been changed!
HeurFlag_F = F Suspicious file access. Might be able to infect a file.
HeurFlag_R = R Relocator. Program code will be relocated in a suspicious way.
HeurFlag_A = A Suspicious Memory Allocation. The program uses a non-standard\n way to search for, and/or allocate memory.
HeurFlag_N = N Wrong name extension. Extension conflicts with program structure.
HeurFlag_S = S Contains a routine to search for executable (.COM or .EXE) files.
HeurFlag_# = # Found a code decryption routine or debugger trap. This is common\n for viruses but also for some copy-protected software.
HeurFlag_V = V This suspicious file has been validated to avoid heuristic alarms.
HeurFlag_E = E Flexible Entry-point. The code seems to be designed to be linked\n on any location within an executable file. Common for viruses.
HeurFlag_L = L The program traps the loading of software. Might be a\n virus that intercepts program load to infect the software.
HeurFlag_D = D Disk write access. The program writes to disk without using DOS.
HeurFlag_M = M Memory resident code. The program might stay resident in memory.
HeurFlag_! = ! Invalid opcode (non-8088 instructions) or out-of-range branch.
HeurFlag_T = T Incorrect timestamp. Some viruses use this to mark infected files.
HeurFlag_J = J Suspicious jump construct. Entry point via chained or indirect\n jumps. This is unusual for normal software but common for viruses.
HeurFlag_? = ? Inconsistent exe-header. Might be a virus but can also be a bug.
HeurFlag_G = G Garbage instructions. Contains code that seems to have no purpose\n other than encryption or avoiding recognition by virus scanners.
HeurFlag_U = U Undocumented interrupt/DOS call. The program might be just tricky\n but can also be a virus using a non-standard way to detect itself.
HeurFlag_Z = Z EXE/COM determination. The program tries to check whether a file\n is a COM or EXE file. Viruses need to do this to infect a program.
HeurFlag_O = O Found code that can be used to overwrite/move a program in memory.
HeurFlag_B = B Back to entry point. Contains code to re-start the program after\n modifications at the entry-point are made. Very usual for viruses.
HeurFlag_K = K Unusual stack. The program has a suspicious stack or an odd stack.
HeurFlag_@ = @ Encountered instructions which are not likely to be generated by\n an assembler, but by some code generator like a polymorphic virus.
HeurFlag_1 = 1 Found instructions which require a 80186 processor or above.
HeurFlag_Y = Y Bootsector violates IBM bootsector format. Missing 55AA-marker.
HeurFlag_p = p Packed program. A virus could be hidden inside the program.
HeurFlag_i = i Additional data found at end of file. Probably internal overlay.
HeurFlag_h = h The program has the hidden or system attribute set.
HeurFlag_w = w The program contains a MS-Windows or OS/2 exe-header.
[FileType]
BootSect = Bootsector
DosCom = Dos com
DosExe = Dos exe
DosDriver = Dos driver
Batch = Dos batch
Data = Data file
OLE2 = OLE2 file
Extender = Extender
Drv_16 = Drv 16-bit
Win_16 = Win 16-bit
OS2_16 = OS2 16-bit
Drv_32 = Drv 32-bit
Win_32 = Win 32-bit
OS2_32 = OS2 32-bit
Win95NT = Win95/NT
NonIntel = Non-Intel
[LogFile]
LogFileHdr = TBAV for Windows virus detection report
Filter = Log Files *.LOG
[DataFile]
Filter = Data Files *.DAT
[WAVFile]
Filter = Sound Files *.WAV
[VirusInfo]
InfoHeader = Information about
Trojan = This is not a virus but a Trojan Horse. It does not spread but simply causes damage. Determine the source of the file and simply delete it.
Dropper = This file is not a virus, but a dropper of a virus. If you run this file it will install a virus on your system. It is highly recommended to delete the file.
Joke = This file is completely innocent. It merely imitates virus activity but is actually harmless. Just delete it if you do not like it.
Garbage = This is NOT a virus, but is detected as such because it has been identified as a virus by some independent tester and is being used in virus scanner tests. To avoid an undeserved penalty in such tests, TbScan detects this file too!
SInfect = This virus is known to infect
COM = COM files,
EXE = EXE files,
SYS = device drivers,
BOOT = boot sectors,
EInfect = but unknown variants may infect other items as well.
Res = It remains resident in memory and infects/damages its victims in the background.
Tool = Actually, this is not just a virus, but a class of viruses. They are all created with the same tool. It is hardly possible to divide and describe all viruses created with this tool individually. Be aware of unknown side-effects. It is highly recommended to restore all files from a reliable backup.
Poly = The virus is polymorphic, which means that it looks different each time it infects a file. Some anti-virus products may have difficulties detecting this virus reliably. Also some false alarms may occur, especially on non-executable files.
Cryp = The virus is encrypted using a trivial encryption scheme. There is no simple signature that can be used to find it. However, the better anti-virus scanners should not have any problems detecting this virus.
Cmp = This is a companion virus. It does not alter existing executable files, instead it creates a new file with the same name, but with a filename extension that has a higher execution priority than the existing one. DOS will start this virus file instead of the original program. After execution, the virus executes the original program.
HLL = The virus is not written in assembly language, as usual, but in a high-level language. Since all components of the virus are the same as the other programs developed with the same programming language, it is difficult to detect such viruses without false alarms.
Many = Because the source code of this virus is widely spread, there are many variants of this virus. It is hardly possible to divide and describe all variants individually. Be aware of unknown side-effects. It is highly recommended to restore all files from a reliable backup.
Stlt = This virus has 'stealth' capabilities, which means that it is able to hide its presence from most people, and even virus scanners and checksummers, unless the virus has not yet been loaded in memory. It is highly recommended to boot from a clean diskette before scanning or cleaning!
Mus = The speaker of your PC may emit unusual sounds.
Msg = Unusual messages or effects may appear on the screen.
Hang = Unexpected system hangs may occur.
Obv = This virus is very obvious, and it is therefore extremely unlikely that the virus will succeed in spreading unnoticed. If you ever get it on your system, it has probably been put there intentionally! Anyway, you will find out that you have a virus immediately, even without a scanner.
Lab = This virus is very buggy and/or requires a special setup. It is hardly possible that the virus will ever succeed to infect another file. Therefore this virus is not a serious threat, but can be classified as a LAB virus.
Rare = This virus almost never appears 'in the wild'. It is very unlikely that you will ever encounter it, except in virus collections.
SClean = CLEANING INFORMATION:\nBefore cleaning or restoring, it is HIGHLY RECOMMENDED to boot from a clean, write-protected system diskette first! This is necessary to ensure that no viruses are active in memory, and to reduce the risk that you execute an infected file by accident.
Data = WARNING!\nThis virus is known to corrupt data files. Although the damage may not be visible immediately, the integrity of your data has been affected once this virus got active in your system. There is no other option than restoring all information from a reliable backup.
Ovw = This virus uses an infection method which makes it impossible to remove it from the file afterwards. Part of the victim file is destroyed by the virus. Therefore you have no other option than to restore everything from a reliable backup.
Del = Removing this virus is easy, just delete it !
Clean = The best thing to do is to restore all executable files from a backup, or to re-install them from their original disks. If speed or ease is more important than data integrity, you may attempt to separate the virus from the file with a cleaner, such as TbClean. Results are always depending on the exact virus variant you may have, on the lay-out of the victim file, and your system configuration.
ClnBoot = You need to restore the original DOS bootsector and/or system files. Enter 'SYS C:' on the DOS command line. You also need to check and clean all your diskettes! Otherwise the virus will return sooner or later! You can clean the diskettes with the 'TbUtil -immunize' command.
MBR = You need to clean the partition code. You can do so with the DOS FDISK program ('FDISK /MBR'), or with TbUtil ('TbUtil C: -immunize'). The latter is recommended.
EClean = As new variants of existing viruses appear almost daily, it is possible that you will encounter a variant of this virus which will still be identified by our scanner, but behaves differently than described above. The information above is therefore intended as a basic guideline.
Text(0xF002)= Windows version:\nWindows enhanced mode:\nDos version:\nMain processor type:\nMath processor present:
Yes = yes
No = no
[Dialog:DLG_CMDLINE]
Title = Edit path string
Text(0xF000)= Path string
Text(0xF001)= These are the disk, paths or files that will be processed when you press OK. Press Cancel to abort the operation.
[Dialog:DLG_CONFIGURE]
Title = Configure TBAV for Windows
Text(0xF000)= Program execution options
Text(0xF001)= File view utility
Text(0xF002)= Audible alerts
Text(0xF003)= Virus alert
Text(0xF004)= Warning messages
Text(2801) = &Wait after program execution
Text(2803) = &Use internal viewer
Text(2806) = &Always
Text(2807) = &Only once
Text(2808) = &Background scan
Text(2809) = &Never
Text(2810) = &Flash virus alert window
Text(2811) = Do not show the '&Quit TBAVWIN' warning - quit immediately
Text(2812) = Do not show the 'TBAV-for-Windows &VxD not installed' warning
Text(2820) = &Play 'beep' sound
Text(2821) = P&lay .WAV file
Text(2822) = Browse
Text(2908) = &Show status window when minimized
[Dialog:DLG_FILES]
Title = Choose disk, paths or files
Text(102) = All &local fixed disks
Text(103) = All &network disks
Text(104) = All &fixed disks
Text(105) = Drive &A:
Text(106) = Drive &B:
[Dialog:DLG_FILELIST]
Text(0xF001)= Target items
Text(106) = &Clear target
Text(107) = &Save target
Directory = Directory
ListFiles = Predefined targets
EditTarget = &Edit target
NewTarget = &New target
ShowList = &Ok
AddItem = &Add Item -->
RemoveTarget= &Remove target
RemoveItem = <-- &Remove Item
Target = Current target:
[Dialog:DLG_SAVESCN]
Title = Save target as
Text(0xF000)= Directory:
Text(0xF001)= File &name
[Dialog:DLG_LOADSCN]
Title = Load target
Text(0xF000)= Directory:
Text(0xF001)= File &name
[Dialog:DLG_BGSCAN]
Title = TBAV for Windows Background scanning
Text(0xF000)= Settings for resident modules
Text(0xF002)= Background Scan Module settings
Text(0xF004)= Specify period of time (in minutes) after which background scanning should start
Text(0xF005)= Target for background scanning:
Text(2903) = Enable &Background Scan Module
Text(2906) = Use &high priority level
Text(2907) = Use &low priority level
Targets = &Targets
[Dialog:DLG_SCAN]
Title = TbScan
Text(3000) = The Thunderbyte Anti-Virus utilities provide a collection of sophisticated programs which offer various ways to check for, identify and remove known as well as unknown viruses from hard and floppy disks on PCs or across networks.
Text(3000) = The TbSetup program stores checksum, validation, and cleaning information of programs in hidden Anti-Vir.Dat files. Several Thunderbyte Anti-Virus (TBAV) utilities use this information to enhance detection and removing of viruses.\nPrograms that require special attention of TBAV utilities are listed in the TbSetup.Dat file. Send files that require special TBAV attention to our BBS for inclusion into this file! You can also add them to this file yourself!
AuthFailure = TBAV for Windows authentication failure while executing
AF_Cancel = The application you want to execute is not authorized by TBAV. Execution will be cancelled.\n\nPress OK to continue.
AF_Ask = The application you want to execute is not authorized by TBAV.\n\nDo you still want to execute this program ?
VirusFound = TBAV for Windows detected a virus while executing
VF_Ask = The application you want to execute is infected or probably infected by a virus.\n\nDo you still want to execute this program ?
Yes = Yes
No = No
[Dialog:DLG_FILEIOOPTIONS]
Title = File I/O Monitor Options
Text(0xF000)= General options
Text(2904) = Enable &File I/O Monitor Module
[Dialog:DLG_VIRUSLIST]
Title = Virus Information
Text(0xF000)= Virus list
Text(1) = &Close
Text(2401) = &View Info
[Dialog:DLG_WHATSNEWLIST]
Title = What's New ?
Text(0xF000)= What's New file list
Text(1) = &Close
Text(2700) = &View Info
[Dialog:DLG_VIRUSINFO]
Title = Virus Information
Text(0xF000)= Virus Information
Text(0xF001)= Virus Information Options
Text(2502) = View detailed virus information (in English !)
[Dialog:DLG_VIRUSFOUND]
Title = Virus Detected !
Text(0xF000)= Virus Information
Text(0xF001)= Action to take
Text(100) = &Delete file
Text(101) = &Kill file
Text(102) = &Rename file
Text(103) = &Validate
Text(104) = Virus &Info
Text(105) = &Non-stop continue
Text(106) = &Continue
Text(107) = &Quit
[Dialog:DLG_NETWORK]
Title = Network options
Text(0xF000)= Communication directory:
Text(0xF001)= Socket name:
Text(0xF003)= Timings (in milliseconds)
Text(0xF004)= &Asynchronous timeout
Text(0xF005)= &Message scan time
Text(0xF006)= &Blocking message scan time
Text(0xF007)= Blocking &request timeout
[Dialog:DLG_USERID]
Title = Registering workstation for TBAVNW
Text(0xF000)= User identification
Text(0xF001)= This workstation is not yet registered for use with TBAV for Networks. Please fill in the requested information.
Text(0xF002)= User login ID:
Text(0xF003)= User description:
[Dialog:DLG_REGWS]
Title = Registering workstation for TBAVNW
Text(0xF000)= This workstation is now being registered for use with TBAV for Networks.\n\nRegistering a workstation will take at most 10 seconds.
Text(0xF001)= There seems to be a problem with the communication with TBAV for Networks.\n\nCall the TBAVNW supervisor! He should solve this problem, and try again.\n\nPress CANCEL to stop registering this workstation.
[Dialog:DLG_TBLOAD]
Title = Options for automatic update
Text(0xF000)= Last update:
Text(0xF001)= Program to load after update:
Text(0xF003)= Update options
Text(0xF004)= &Update directory
Text(3103) = Update &newer files only
Text(3104) = Update &all files
Text(3105) = &Enable automatic update
[Dialog:DLG_QUIT]
Title = Quit TBAV for Windows
Text(0xF000)= When TBAV for Windows is terminated, the File I/O monitor, Application Execution Tracker and Background Scanning will be disabled. You might want to minimize TBAVWIN to keep TBAV for Windows active in the background.\n\nPlease choose one of the available options.
Text(3200) = &Do not show this message next time - quit immediately
Text(100) = &Minimize
Text(101) = &Quit
Text(102) = &Cancel
[Dialog:DLG_NOVXD]
Title = TBAV for Windows VxD Not Installed!
Text(0xF000)= The TBAV for Windows VxD is not installed, because it is not listed in SYSTEM.INI or MS-Windows is not running in 386 enhanced mode. For this reason, the File I/O monitor and Application Excution Tracker modules will be disabled.\n\nPress OK to continue.
