home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: Graphics
/
Graphics.zip
/
impdemo.zip
/
readme
< prev
next >
Wrap
Text File
|
1996-08-20
|
3KB
|
63 lines
Impos/2 Version 2.0 e
======================
This is a limited Version of Impos/2.
--------------------------------------------------------------------------
The following restrictions apply to the demo version:
- Saving is not possible
- Export through the clipboard is not possible
- A 'Demo' stroke is printed over each printout
--------------------------------------------------------------------------
Installation:
=============
o Install Impos/2 by calling A:\INSTALL. All needed files will
be copied onto your harddisk and an Impos/2 WPS object will
be created on the desktop, this object can then be moved to
any folder. No matter where it is located, it will be
replaced after each Impos/2 installation.
o During the installation, an association is done between IMPOS.EXE
and the file formats known by Impos/2, that means that a double-click
on any of these files (e.g. in the drives folder) will start
Impos/2, or activate it if it is already started.
--------------------------------------------------------------------------
Scanner-Support:
================
Note: With the exception of the IBM 3119, all flat bed scanners must be
attached to a SCSI adapter supported by OS/2. The adapter cards
provided by the flat bed scanner manufacturers are not supported.
o When using one of the supported SCSI-Scanner with the
CPASPI.SYS shipped with Impos/2 make sure, that the ASPI driver
that comes with OS/2 plus the adapter specific driver are
installed in the CONFIG.SYS. The following example shows the
entries in the CONFIG.SYS for an Mustek-SCSI-Scanner connected to an
Adaptec 1542CF card:
- BASEDEV=OS2ASPI.DMD
- BASEDEV=AHA154X.ADD
- DEVICE=C:\IMPOS20\CPASPI.SYS
o When using a MicroChannel device, make sure that the port-address
of the parallel-port and that of the scanner do not conflict (do
not set the scanner-port to 27Bh), otherwise the parallel-port
will be locked for all DOS-sessions by Impos/2.
o Impos/2 might possibly work with scanners that we have not listed,
and that are soft- or hardware compatible with them.
Please tell us if you have such a scanner, this could help us
in the scanner-support development and possibly other Impos/2 users.