home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osot123f.txt
< prev
next >
Wrap
Text File
|
1997-06-03
|
3KB
|
83 lines
OSOT123F - MAXIMIZING A WINDOW IN LOTUS 1-2-3 FOR OS/2 AND FREELANCE
GRAPHICS FOR OS/2, RELEASE 2.1
12/30/96
=======================================================================
Maximizing a Window in Lotus 1-2-3 for OS/2 and Freelance Graphics for
OS/2, Release 2.1
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
Problems maximizing Lotus 1-2-3 or Freelance Graphics for OS/2 windows
occur on some systems.
RESOLUTION
If you have a problem maximizing a window of Lotus 1-2-3 for OS/2 or
Freelance Graphics for OS/2, Release 2.1, do the following:
For Lotus 1-2-3, do the following:
1. Exit Lotus 1-2-3. (If you have Lotus 1-2-3 and Freelance
Graphics installed in the same directory and they are both
running, you must also exit Freelance Graphics.)
2. From an OS/2 command prompt, change to the drive and directory where
Lotus 1-2-3 is installed, for example, type CD \123G; then press
Enter.
3. Copy the LOTUSFIX.CMD file and LOTUSFIX patch file located in
the \OS2 directory to the \123G directory. For example, if you
have OS/2 Warp 4 installed on the C: drive, type:
COPY C:\OS2\LOTUSFIX.*; then press Enter.
4. From an OS/2 command prompt, type:
LOTUSFIX; then press Enter.
The message, "Patches applied to LD2CORE.DLL" is displayed.
Note: If you have Lotus 1-2-3 and Freelance Graphics both installed
in the same directory, you do not have to perform the
following steps for Freelance Graphics. The previous steps
applied the patch to both.
For Freelance Graphics, do the following:
1. Exit Freelance Graphics.
2. From an OS/2 command prompt, change to the directory where
Freelance Graphics is installed. In a standard
installation it is located in the \FLG directory.
3. Copy the LOTUSFIX.CMD file and LOTUSFIX patch file located
in the \OS2 directory to the \FLG directory. For example, if
you have OS/2 Warp 4 installed on the C: drive, type:
COPY C:\OS2\LOTUSFIX.*; then press Enter.
4. From an OS/2 command prompt, type:
LOTUSFIX; then press Enter.
The following message displays:
Patches applied to LD2CORE.DLL
warp4
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.