home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osmmlasr.txt
< prev
next >
Wrap
Text File
|
1997-03-13
|
2KB
|
45 lines
OSMMLASR - NO LASERDISC VIDEO DISPLAYED ON SCREEN USING VIDEODISC
02/07/96
=======================================================================
No Laserdisc Video Displayed on Screen Using Videodisc
OS/2 2.1 or OS/2 2.11
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
No video appears on the screen when Videodisc is selected from the
MMPM/2 folder, even when an M-Motion card is being used.
RESOLUTION
MMPM/2 Videodisc support does not allow laserdisc movies to be displayed
on the screen. Videodisc support controls the laserdisc device.
Baud-rate settings for both the laserdisc and MMPM must be synchronized.
MMPM/2 Videodisc does not display movies on the system monitor if you
have an M-Motion card or a similar card.
Check the baud rate and parity of the laserdisc and the MMPM/2 DLL
driver. To modify the baud rate:
1. Open MMPM/2 Setup.
2. Select Laserdisk type.
3. Modify the settings, as required.
Note: As an alternative, update the laserdisc driver section of the
MMPM/2.INI file.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.