home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osinintr.txt
< prev
next >
Wrap
Text File
|
1997-05-13
|
1KB
|
37 lines
OSININTR - INTERNAL CD-ROM NOT RECOGNIZED DURING OS/2 WARP INSTALLATION
01/29/96
=======================================================================
Internal CD-ROM Not Recognized during OS/2 Warp Installation
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
During installation of OS/2 Warp, the CD-ROM driver, OS2CDROM.DMD,
cannot be found.
RESOLUTION
This is a hardware problem.
On the back of the CD-ROM drive, set the jumper that controls the bus
device number to 0.
Most sound-card manufacturers leave the setting at the factory default
of 1. If it is not set to 0, Diskette 1 does not load OS2CDROM.DMD, and
the installation stops with a red screen indicating the CD-ROM cannot
be found.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.