home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osinbins.txt
< prev
next >
Wrap
Text File
|
1997-05-01
|
4KB
|
136 lines
OSINBINS - INSTALLING OS/2 2.1 WHEN DRIVE A IS 5.25-INCH
01/05/96
=======================================================================
Installing OS/2 2.1 when Drive A Is 5.25-Inch
=======================================================================
Please Read Entire Document for Full Explanation of Procedure
-------------------------------------------------------------
DESCRIPTION
Your OS/2 2.1 package contains 3.5-inch diskettes, and your 3.5-inch
drive is drive B.
RESOLUTION
1. Exchange the OS/2 2.1 package for a 5.25-inch version.
2. Download the following from the IBM PCC BBS (919-517-0001) or from
CompuServe:
Blue Diskettes:
PKUNZIP
INS21L.ZIP
LDF.COM
Salmon or Green Diskettes:
PKUNZIP
INS21M.ZIP
LDF.COM
Each file has a README file that provides instructions.
PKUNZIP is addressed shortly after logging on and gives you the
option to download it.
3. Create 5.25-inch OS/2 startable diskettes using the procedure below
and install OS/2 from drive B.
You can change your CMOS or BIOS setup and switch cables on the
diskette drives.
If you receive a COUNTRY.SYS error message with Diskette 1 while
redirecting:
* Check cables to verify they were switched correctly.
* Check the CMOS setup for the drives changed.
If problems or questions occur while doing this, contact the system
vendor.
Creating 5.25-Inch Startable Diskettes
--------------------------------------
You need the DOS Debug utility program, about 1.5 MB of space on the
hard disk, and two 1.2 MB 5.25-inch diskettes. Label one diskette OS/2
V2.1 525DISK 0 and the other OS/2 V2.1 525DISK 1.
1. Insert the 525DISK 1 diskette in drive A; then type
C:\>FORMAT A: /U and press Enter.
2. When prompted for the volume label, type DISK 1 and press Enter.
3. When "Format another diskette (Y/N)?" appears, press Y and then
Enter.
4. Remove the diskette and insert 525DISK 0; then press Enter.
5. When prompted for the volume label, type DISK 0 and press Enter.
6. When "Format another diskette (Y/N)?" appears, press N and then
Enter.
7. Insert the OS/2 v2.1 Installation Diskette in drive B; then type
the following commands, pressing Enter after each:
C:\>DEBUG
-L DS:0 1 0 1
-E 13 60
-E 14 09
-E 15 F9
-E 16 07
-E 18 0F
-W DS:0 0 0 1
-Q
C:\>COPY B:\OS2BOOT A:\
C:\>COPY B:\OS2LDR A:\
C:\>COPY B:\OS2LDR.MSG A:\
C:\>COPY B:\OS2KRNLI A:\
C:\>COPY B:\ABIOS.SYS A:\
C:\>COPY B:\*.BIO A:\
8. Remove the Installation Diskette from drive B and the 525DISK 0
diskette from drive A.
9. Insert 525DISK 1 in drive A and OS/2 Diskette 1 in drive B.
10. Type the following commands, pressing Enter after each:
C:\>MD BINST
C:\>COPY B:\*.* BINST
C:\>DEL BINST\BUNDLE
C:\>DEL BINST\SYSINST2.EXE
C:\>COPY BINST\*.* A:\
C:\>ECHO SET OS2_SHELL=CMD.EXE>> A:\CONFIG.SYS
C:\>ECHO SET DISKETTESOURCE=B:\ >> A:\CONFIG.SYS
11. Insert 525DISK 0 in drive A; then restart the system.
12. When prompted for Diskette 1, insert 525DISK 1 in drive A.
13. Press Enter. You are now at the A: prompt.
14. Insert OS/2 Diskette 1 in drive B; then type B:\SYSINST2 and press
Enter. The OS/2 installation starts from drive B.
15. When prompted, insert the OS/2 v2.1 Installation diskettes in drive
B.
16. Leave the 525DISK 1 diskette in drive A until you are prompted to
remove all diskettes; then remove the diskettes and restart the
system.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1995 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.