home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
osda1200.txt
< prev
next >
Wrap
Text File
|
1996-11-14
|
3KB
|
100 lines
OSDA1200 - SYS1200 OR SYS0008 ERROR WHEN STARTING DOS SESSIONS UNDER
OS/2 WARP
03/04/96
=======================================================================
SYS1200 or SYS0008 Error when Starting DOS Sessions under OS/2 Warp
=======================================================================
Please Read Entire Document for Full Explanation of Procedures
--------------------------------------------------------------
DESCRIPTION
When starting the system, the following error message appears:
SYS1200: The system cannot create the DOS environment. The error
code is ***.
When starting a DOS or WIN-OS/2 session, the "Cannot start..." message
is received. In addition, when running COMMAND.COM from an OS2 Window,
the following error message is received:
SYS0008: There is not enough memory available to process this
command. All available memory is in use.
RESOLUTION
Note: Make sure you have a backup of any file you intend to change.
You must selectively reinstall DOS support. Before starting, however,
delete all files in the \OS2\MDOS subdirectory, unless WIN-OS/2 support
is installed; in this case, back up the VWIN.SYS and VW32S.SYS files in
the \OS2\MDOS subdirectory before deleting the files.
When Selective Install is complete, copy the VWIN.SYS and VW32S.SYS
files back to the \OS2\MDOS directory. You also need to add the WINDOWS
directory to the PATH statement in the AUTOEXEC.BAT file.
1. Open OS/2 System; then open Command Prompts.
2. Select OS/2 Window; then type the following, pressing Enter after
each:
CD \OS2\MDOS
COPY VW*.SYS \OS2
DEL *.*
3. When you see "Are you sure?," press Y.
4. Type Exit and press Enter. This will end the OS/2 Window session.
5. Open the OS/2 System folder.
6. Open the System Setup folder; then select Selective Install.
7. Select OK in the System Configuration window to get to the next
screen.
8. If the Multimedia Device Settings window is displayed, select OK.
9. In the OS/2 Setup and Installation window select OS/2 DOS support.
10. Select Install.
11. Select the correct source drive, and then select Install.
12. Insert the OS/2 diskettes when prompted.
13. Do NOT perform shutdown when prompted. Instead, open the OS/2
Window and type the following, pressing Enter after each:
CD \OS2
COPY VW*.SYS/MDOS
CD \
E AUTOEXEC.BAT
The AUTOEXEC.BAT file is displayed. At the end of the file is the
PATH statement.
14. Add the WINDOWS directory, as follows:
PATH C:\OS2;C:\OS2\MDOS;C:\;C:\WINDOWS;
15. Save and exit the file.
16. Shut down and then restart the system.
This should solve the problem 99% of the time, if OS/2 Warp was not
installed over a previous version of OS/2.
______________________________________________________________________
IBM disclaims all warranties, whether express or implied, including
without limitation, warranties of fitness and merchantability with
respect to the information in this document. By furnishing this
document, IBM grants no licenses to any related patents or copyrights.
Copyright (c) 1994, 1996 IBM Corporation. Any trademarks and product
or brand names referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.