home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 36 Tips
/
36-Tips.zip
/
2WINST.FAX
< prev
next >
Wrap
Text File
|
1995-02-19
|
5KB
|
153 lines
OS2WINST - SELECTIVE INSTALL WIN-OS/2 SUPPORT
10/19/94
================================================================
SELECTIVE INSTALL WIN-OS/2 SUPPORT
================================================================
Please Read Entire Document for Full Explanation of Procedures
----------------------------------------------------------------
SELECTIVE (RE-) INSTALL OF WIN-OS/2 SUPPORT FOR OS/2 2.1,
NOT TO BE APPLIED TO OS/2 FOR WINDOWS
SYMPTOMS:
Cannot start WIN-OS/2 Full Screen or Program Manager from
desktop, or launch Windows applications seamlessly because:
1. Migration of Windows desktop and/or migration of Windows
applications was performed during install of OS/2 2.1
when Advanced Options window was presented.
2. Upgrade from OS/2 2.0 to 2.1 was not successful which
can be determined partly by going into WIN-OS/2 full
screen settings and checking the PATH and FILENAME statement
for WINOS2.COM. Or, applications launched, but not all
functions are available after several remigrations or even
reinstallations. This procedure applies when WIN-OS/2
doesn't behave normally, where Windows (or applications)
within Program Manager may hang and/or switching between
Program Manager and the OS/2 desktop is problematic.
RESOLUTION:
1. Obtain OS/2 2.1 and any Windows applications diskettes.
Selective Install CANNOT be started without these diskettes.
2. Close any Windows applications and WIN-OS/2 full screen.
Check the Window List for anything that may be minimized.
3. Start from OS/2 desktop.
4. Selective Install involves:
- Deleting all files from WINOS2\SYSTEM and WINOS2
directories
- Following Selective Install in System Setup and
inserting diskettes when prompted
- Reinstalling fonts in WIN-OS/2 full screen if any
were added
- Reinstalling Windows applications from WIN-OS/2 full
screen using File/Run, or from a command line
- Remigrating applications to desktop in order to run them
in seamless mode
PROCEDURES:
You MUST have all the OS/2 2.1 and appropriate Windows
applications diskettes to proceed with Selective Install.
To delete directories:
1. Open OS/2 System, then Command Prompts.
2. Double-click on OS/2 Window.
3. At the command prompt type:
CD\OS2\MDOS\WINOS2 and press Enter
4. Type:
DEL *.* and press Enter
5. When asked are you sure?, press Y, and press Enter
6. Type:
Exit and press Enter
See pages 76-77 in OS/2 2.1 Using the Operating System
for instructions on Selective Install. It is possible to
bring up System Setup - Icon View for the Selective Install
icon by selecting that option in the Desktop/Shutdown menu
from the OS/2 desktop.
7. Select Selective Install.
8. Select OK on System Configuration window.
9. Select WIN-OS/2 Support by placing a mark in the box to
the left of this option.
10. Select Install. The source drive is indicated (A:\ for
diskette, or other for CD-ROM).
11. Insert diskettes as prompted.
12. At the Advanced Options screen, select Configure Desktop.
13. Select Standard WIN-OS/2 Default Desktop.
14. Remove diskette and restart the system when installation is
completed.
15. From the OS/2 desktop, open WIN-OS/2 Full Screen. From
WIN-OS/2 Program Manager:
16. Reinstall Windows applications to the same directories where
they were previously installed, using File/Run. Following
instructions from Application software manuals and OS/2
2.1 documentation.
17. Reinstall printer(s):
A. Select Control Panel.
B. Select Printers.
C. Highlight the correct printer or appropriate emulation,
and select Install.
D. If prompted, install Printer Driver from diskette or
select Browse to install from hard disk.
E. Select OK.
F. Close.
18. Select ATM Control Panel, if ATM fonts need to be installed.
A. Select Add.
B. Select PSFONTS on the right side of the window where the
directories are listed.
C. Select PFM when the directory changes.
D. Select fonts to be installed from the list.
1. For all fonts:
- Highlight first font.
- Scroll down to the bottom of the list.
- Hold the Shift key and select last name on list.
2. For a few fonts:
- Highlight the first font.
- Hold Ctrl key while selecting additional fonts.
3. Select Add.
E. After Fonts are installed, the initial ATM Control Panel
screen appears.
F. Ensure ATM is checked On.
G. Click on Exit.
19. Run applications from WIN-OS/2 full screen to verify they
run correctly.
----------------------------------------------------------------
IBM disclaims all warranties, whether express or implied,
including without limitation, warranties of fitness and
merchantability with respect to the information in this document.
By furnishing this document, IBM grants no licenses to any
related patents or copyrights.