home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 35 Internet
/
35-Internet.zip
/
os2www32.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1996-08-19
|
7KB
|
194 lines
OS/2 Upload Information for ftp-os2.nmsu.edu and ftp.cdrom.com
Archive Name: OS2WWW32.ZIP
Program Description: Integrated Web, FTP, SMTP and POP3 Server - Multi-Threaded 32-bit
Operating System Versions: OS/2 Warp Connect
Program Source: N/A
Replaces: OS2WWW31.ZIP
Proposed Directory: /os2/network/tcpip
Documentation: Online Documentation (HTML)
Submitter's Name: CompuSource
Submitter's eMail: source@iaccess.za
__________________________________________________________________________
CompuSource PowerWeb Server++ for IBM OS/2 Warp Connect
CONTENTS:
INSTALLATION
UPDATES / UPGRADING
TCP/IP PROBLEMS
FILE AND DIRECTORY STRUCTURE
COPYRIGHT AND CONTACT DETAILS
__________________________________________________________________________
INSTALLATION:
1. Copy the OS2WWWxx.ZIP file into a directory named "\PowerWeb" and
change your current directory to "\PowerWeb".
2. Unzip using either pkunzip or unzip as follows:
unzip os2www.zip
pkunzip -d os2www.zip
Note: It is important to use the command line switches shown above to
create the sub-directories below "\PowerWeb".
3. Run install, according to your IP ADDRESS:
(note: if you are running the 4OS2 command shell, please exit it first)
a. If you are using a dynamic IP address, then ensure that your
HOSTS file in your \mptn\etc or \tcpip\etc directory contains the
following line:
127.0.0.1 localhost
and then run
INSTALL -local
and follow its instructions carefully, and fill in all forms completely.
b. If you are using a permanent IP address, then run
INSTALL
and follow its instructions carefully, and fill in all forms completely.
4. Do not delete the OS2WWWxx.ZIP file after a successful installation,
it has been moved to a system directory, in case you need to re-install.
5. If you experience problems, such as reported TCP/IP configuration
problems, please load the file tcpipos2.htm into your browser and
follow its suggestions.
__________________________________________________________________________
UPDATES / UPGRADING:
1. Copy the OS2WWWxx.ZIP file into your server root directory, such as
"\PowerWeb".
2. Unzip using either pkunzip or unzip as follows:
unzip os2www.zip
pkunzip -d os2www.zip
Note: It is important to use the command line switches shown above to
create the sub-directories below "\PowerWeb".
3. Shut down the existing PowerWeb server.
4. Restart the PowerWeb server, by running the "PowerWeb.cmd" batch file
in your server root directory.
5. If you subsequently need to revert to an old version, there is a menu
option on the main "/admin" page to choose which version to run.
__________________________________________________________________________
TCP/IP PROBLEMS:
If you experience problems installing or running PowerWeb, please load
the tcpipos2.htm file into your browser and read its contents carefully.
__________________________________________________________________________
FILE AND DIRECTORY STRUCTURE:
\powerweb Main directory where PowerWeb was unzipped
|
|__file_id.diz Short description file
|__install.cmd The Install program
|__install.htm Installation instructions (use your browser to read it)
|__readme.txt This file
|__tcpipos2.htm TCP/IP setup instructions and Problem Diagnosis
|__version Contains the name of the SYSTEM directory for this version
|
|__\bin\* Suggested location for your API Hook libraries
|
|__\cgi-bin\* Suggested location for your CGI Executables
|
|__\conf\* Location of configuration files
|
|__\docs\* Suggested location of HTTP document root
|
|__\ftp\* Suggested location of FTP document root
| |__\pub\* Publicly accessible FTP directory for downloads
| |__\incoming\* Publicly accessible FTP directory for uploads
|
|__\art\* Suggested location for your icons and artwork
| |__\digits\* Suggested location for your digit GIFs used for Page Access Counters
|
|__\mail\* Suggested location for POP3 Mail directory root
|
|__\perl-bin\* Suggested location for your Perl scripts
|
|__\queue
| |
| |__\mail\* Suggested location for SMTP Mail Queue
|
|__\rexx-bin\* Suggested location for your Rexx scripts
|
|__\sys3xx Version 3.xx distribution files (often called the SYSTEM directory)
| |
| |__\admin\* Administration and Configuration Utilities
| | |__\dbaccess\* Web DBAccess Wizards and Browsers
| | |__\help\* Technical Documentation and Configuration Help files
| | |__\upgrade\* Upgrade Notes
| | |__\wizards\* HTML Wizards for creating new HTML Documents
| |
| |__\bin\* Executables and Runtime Libraries
| |
| |__\cgi-bin\* Example CGI Executables
| |
| |__\icons\* Icons used by PowerWeb Server
| | |__\bullets\* Bullets suitable for HTML Lists
| | |__\buttons\* Buttons used on PowerWeb HTML pages
| | |__\clips\* Artwork clips used on PowerWeb HTML pages
| | |__\digits\* Sample digit GIFs used for Page Access Counters
| | |__\logos\* Logos used on PowerWeb HTML pages
| | |__\textures\* Textures suitable for HTML page backgrounds
| |
| |__\include\* API Extensions header files (for compiling)
| |
| |__\install\* Installation HTML pages
| |
| |__\lib\* API Extensions library files (for linking)
| |
| |__\perl-bin\* Example PERL scripts
| |
| |__\rexx-bin\* Example REXX scripts
| |
| |__\powerweb\* General Documentation on PowerWeb
| |
| |__\tour\* Guided Tour HTML pages and images
| |__\database\* Database files used by the Guided Tour
| |__\source\* Source code for sample API Extensions
|
|__\usr Suggested parent directory for all user home directories.
__________________________________________________________________________
COPYRIGHT AND CONTACT DETAILS:
Copyright (c) CompuSource
All rights reserved. Address:
SMTP: source@iaccess.za The Power Team
HTTP: www.compusource.co.za Building 6, Room 201,
FTP: ftp.compusource.co.za CompuSource (Pty) Ltd
PO Box 510
Time Zone: GMT+2 hours Constantia 7848
South Africa
Tel: +27-21-759197
Fax: +27-21-728005
__________________________________________________________________________