OS/2 Shareware BBS: 35 Internet/35-Internet.zip/ftpit23.zip/usergde.inf

OS/2 Help File | 1997-03-08 | 35KB | 978 lines

ΓòÉΓòÉΓòÉ 1. Introduction ΓòÉΓòÉΓòÉ

Welcome to the FTP-It! User's Guide!


ΓòÉΓòÉΓòÉ 1.1. What is FTP-It! ? ΓòÉΓòÉΓòÉ

FTP-It! is a 32-bit, multi-threaded FTP Client application for OS/2.

With FTP-It! you can connect to and interact with multiple remote FTP servers
concurrently. Files and directories on each host are presented in separate,
resizeable windows. Since each host window executes on it's own OS/2 thread,
parallel file and directory events are possible.

FTP-It! complies with RFC 959, 1123 and 1579 specifications of the File
Transfer Protocol (FTP).

The FTP-It! GUI is written in REXX, using Watcom VX-REXX. A C language DLL
provides the TCP/IP services for FTP-It!.

Thank you for trying FTP-It!. We hope you will find it a useful tool.


ΓòÉΓòÉΓòÉ 1.2. Features ΓòÉΓòÉΓòÉ

Some of the basic features of FTP-It! are

        -  Separate, resizable windows for all hosts
        -  Multi-threading to allow parallel file and directory events on all
           hosts
        -  File and directory display in a easy-to-use, customizable format
        -  File transfer progress, including byte count and time estimate
        -  Ability to abort a connect or an active file transfer
        -  Rename and delete files, and create and delete directories on all
           hosts
        -  Remote host command window for SITE and QUOTE support
        -  Print local files
        -  Save and print the unparsed file list generated by a remote host
        -  Automatically browse a file downloaded from a remote host
        -  Multiple file select for delete, rename and transfer
        -  Drag-and-drop file transfer, delete, and local file print
        -  File list caching for improved client and server performance
        -  Individual settings notebook for all hosts
        -  User-defined aliases for host names


ΓòÉΓòÉΓòÉ 1.3. Requirements ΓòÉΓòÉΓòÉ

These are minimum requirements to run FTP_It!:

        -  OS/2 V2.x, WARP V3, WARP Connect V3, WARP V4
        -  Internet Access Kit, TCP/IP V2.0, TCP/IP V3.0
        -  Watcom VX-REXX runtime DLL (Version 2.13 is provided)
        -  LAN or dialup access to the Internet


ΓòÉΓòÉΓòÉ 1.4. What's New In This Release ΓòÉΓòÉΓòÉ

An important new item is that our email address has changed. Please send
comments and requests for support to [e-mail]

Some of the key new features of FTP-It! are

        -  Host name aliases can be assigned and used for the host name. With
           aliases you can now store different combinations of
           userids,passwords and pathnames for the same host. Less typing, more
           productivity.

        -  The Connect Menu Quicklist lets you connect to a host with a couple
           of mouse clicks, just one click if you hold the button down!!!

        -  Pushbuttons have been added to the File Browser window so that you
           can navigate through the queue of files in the Browser and delete
           those files that you decide that you do not want

        -  Registration data is kept if you re-install OS/2 (Yes, this means
           you don't have to keep asking for new passwords)

        -  A remote file's date stamp can be preserved when the file is
           downloaded

        -  Pushbuttons have been added to the Local and Remote Host windows
           which will take you to the parent directory or the original
           directory with one click.

 See Release Information for the complete list of changes and fixes.


ΓòÉΓòÉΓòÉ 1.5. Shareware Restrictions ΓòÉΓòÉΓòÉ

There aren't any. This version of FTP-It! is fully-functional.

However, until registered, it is an evaluation copy subject to an evaluation
period. The evaluation period begins with the first execution and lasts for 28
days.

At the end of the evaluation period, you must register FTP-It! if you want to
continue to use it.


ΓòÉΓòÉΓòÉ 2. Ordering and Registration ΓòÉΓòÉΓòÉ

FTP-It! can be obtained

     by anonymous FTP to ftp.wilmington.net/bmtmicro
     from the public area of many of the popular FTP sites
     from the Web at http://www.wilmington.net/bmtmicro.

 The file name is ftpit23.exe and it is a self-extracting Info-ZIP of the
 installation files.

 To register FTP-It! you need a registration password or key. To obtain one

     Contact BMT Micro and pay the registration fee, OR
     Use the Online Registration applet found in the FTP-It! folder, OR
     Send cash, personal check or money order for $29.95 (US dollars only
      please) AND your email address to:
        -  Ben Brown
        -  503 Horizon Ct
        -  Murphy, TX 75094

 Once you have received your registration password,

   1. Start FTP-It! and wait for the Local Host window
   2. Click the 'Register' pushbutton
   3. Type your registration password and press ENTER

 That's all that there is to it!


ΓòÉΓòÉΓòÉ 2.1. How To Contact BMT Micro ΓòÉΓòÉΓòÉ

BMT Micro can be contacted in several ways. See the file register.txt for all
of the information from BMT Micro

      Telephone: 8:00am - 7:00pm EST (-5 GMT)
            [phone] (orders only)
            [phone]

      Mail Orders: BMT Micro
             PO Box 15016
             Wilmington, NC 28408
             U.S.A.

      Fax Orders: [phone]     24 hours / 7 Days
             (800) 346-1OS2 (1672) toll-free U.S. and Canada

      Online Orders via modem: [phone]  10 lines, all 14.4K
                    [phone]  Direct 28.8K line

      Ordering and general ordering questions via AOL: bmtmicro
                              MSN: bmtmicro
                            Prodigy: HNGP66D
                          Compuserve: 74031,307
                            Internet: [e-mail]
                                 [e-mail]
                                 http://www.bmtmicro.com

 BMT Micro accepts Visa, Mastercard, Discover, American Express, Diner's Club,
 Carte Blanche, Cashiers Check, Personal Check. Eurochecks in DM are welcome.
 DM, Sterling and US currency is welcome but send only by registered mail,
 return receipt requested. BMT Micro cannot be liable for lost cash sent
 through the mail.


ΓòÉΓòÉΓòÉ 3. Installation ΓòÉΓòÉΓòÉ

FTP-It! is installed from the installation zip ftpit23.exe that you can
download from the public area of many of the popular FTP sites or from the BMT
Micro ftp site.

        1. Download the installation zip to your machine. Directory C:\TEMP is
           assumed in this example.
        2. Stop FTP-It! if it is running
        3. Open an OS/2 command window
        4. Type c: and press ENTER
        5. Type cd \temp and press ENTER
        6. Type ftpit23 and press ENTER to extract the installation files from
           the ZIP
        7. Type install and press ENTER


ΓòÉΓòÉΓòÉ 3.1. Running INSTALL.EXE ΓòÉΓòÉΓòÉ

At this point you should be looking at the FTP-It! Installation window

        1. Click 'Actions' and then 'Install product', or press and hold CTRL
           and press i
        2. Wait for the Installation directory window
        3. Change the destination drive and/or directory if you want to
             -  Please don't change anything but the destination drive and/or
                directory
        4. Press ENTER
        5. Verify the location of the installation files is correct, and change
           if necessary
        6. Press ENTER and wait for installation to complete
        7. Press and hold ALT and press F4 to close the installation program


ΓòÉΓòÉΓòÉ 3.2. Advanced Installation Topics ΓòÉΓòÉΓòÉ

This section contains information for experienced users.


ΓòÉΓòÉΓòÉ 3.2.1. Rebuild FTP-It! Desktop Objects ΓòÉΓòÉΓòÉ

To rebuild the FTP-It! Desktop folder and the FTP-It! icons

        1. Follow the installation instructions until you see the Installation
           directory window
        2. Click 'Copy product files' to deselect it
        3. Click 'Continue' or press ENTER
        4. Wait for the installation program to complete, then close it


ΓòÉΓòÉΓòÉ 3.2.2. If You Already Have VROBJ.DLL ΓòÉΓòÉΓòÉ

The VX-REXX runtime, VROBJ.DLL, is distributed with FTP-It!. If you have
installed VX-REXX or another product that uses VX-REXX, you will already have
VROBJ.DLL on your machine.

If you would like to save some disk space

        1. Locate the other copy of VROBJ.DLL and ensure that it is
             -  Version 2.13 or greater, AND
             -  In a directory defined as a LIBPATH in CONFIG.SYS
        2. Delete VROBJ.DLL from the FTP-It! target directory

 If FTP-IT! is used with a version of VROBJ.DLL that is older than v2.13,
 VX-REXX will warn you about a version mismatch when FTP-It! is started. There
 are no known problems with FTP-It! and version 2.12 of VROBJ.DLL. No other
 combination has been tested.

 VROBJ.DLL is distributed with OS/2 Warp. It is installed in the OS2\GRPWARE
 directory.


ΓòÉΓòÉΓòÉ 4. Getting Started ΓòÉΓòÉΓòÉ

In the sections that follow are examples of using some of the basic FTP-It!
capabilities. The examples, from start to finish, will show you how to

        -  Setup default logon parameters
        -  Setup a remote host alias
        -  Add a host name to the Quicklist
        -  Logon to a remote host
        -  Change the remote host display to another directory
        -  Download a remote host file to your workstation
        -  Close the remote host connection

 Each example assumes that you have followed the preceding examples.

 The first step is to locate the FTP-It! folder on the Desktop, open it and
 double-click the FTP-It! icon.

 If you haven't registered FTP-It!, you will see the shareware evaluation
 reminder window first. You must click 'OK' or press ENTER to continue.


ΓòÉΓòÉΓòÉ 4.1. Setup Default Logon Parameters ΓòÉΓòÉΓòÉ

NOTE: A default userid of anonymous and password of your e-mail address are
very handy, but not required. This example assumes that you will want these
defaults.

From the Local Host window

        1. Open the local host settings notebook
             -  Click 'Options' on the menu bar and then 'Settings', or press
                and hold CTRL and press n
        2. Click the 'Options' tab
        3. Enter your e-mail address in the entryfield
        4. Check 'Use As Default Password' if you want FTP-It! to use the
           e-mail address when no logon password is specified
        5. Click the 'Logon' tab
        6. Note the default Userid is anonymous
        7. Note a default Password is not specified. If you specify one here
           and have also checked 'Use As Default Password' in 'Options' then
           this password will take precedence


ΓòÉΓòÉΓòÉ 4.2. Setup A Remote Host Alias ΓòÉΓòÉΓòÉ

The Logon window contains a drop-down list of names. Each name is either a host
name or an alias. You can define an alias in the Hosts section of the Local
Settings Notebook

        1. Click the 'Hosts' tab
        2. Double-click a list item, or click New to define another item
        3. Enter the logon parameters in the Host Definition window fields.
        4. Enter an alias name that is meaningful to you.
             -  Note that you can add this host or alias to the Quicklist here
                by checking the indicated box
        5. Click OK to save the changes

 Now both the hostname and the alias you chose appear in the list of host
 names. You could use the 'real name' entry for defaults to use with new
 userids, and the 'alias' entry for a specialized userid,password,pathname
 combination.

 Host aliases are especially useful if you must go through a gateway server to
 access the Internet. In this case you would always connect to the gateway host
 and specify the target host name in the userid, like anonymous@hobbes. By
 using aliases, you can have multiple instances of the gateway host machine
 with unique userids that contain the actual, target host name.


ΓòÉΓòÉΓòÉ 4.3. Add A Host Name To The Quicklist ΓòÉΓòÉΓòÉ

You can add hosts that have been pre-defined with logon parameters to the
Quicklist. Using this list you can connect to a host with a single mouse click.

In the Hosts section of the Local Settings Notebook

        1. Click a host name(s) in the list box to select the desired host(s)
        2. Click the right mouse button on the list box to open the action menu
        3. Click Add To Quicklist

      The host names you selected will now appear in the Quicklist. Click
      'Connect' on the Local Host window menu and then 'Quicklist' to see the
      list. Click one of the item to connect to that host.


ΓòÉΓòÉΓòÉ 4.4. Logon To A Remote Host ΓòÉΓòÉΓòÉ

This example will show you how to connect to the hobbes FTP site. You can use
another remote host if you would prefer.

From the Local Host window

        1. Click the 'Logon' pushbutton, or press and hold CTRL and press L
        2. Wait for the Logon window
        3. Type hobbes.nmsu.edu into the Host entryfield
        4. Note the other entryfields are filled with the values specified on
           the Logon page of the Local Settings Notebook
        5. Click 'Logon' or press ENTER

 The password in this example was omitted. FTP-It! used your e-mail address for
 the password if that option was checked on the Logon page of the Local
 Settings Notebook.

 If the logon fails for some reason (like too many anonymous users), you will
 see a window displaying the last message received from hobbes and asking if
 you want to retry

        -  Click 'Yes' or press ENTER to retry the logon up to the indicated
           number or times, or
        -  Click 'No' or press ESC to cancel the logon request, or
        -  Click 'Messages' to see all of the messages generated by hobbes so
           far

 When you are connected to hobbes, you will see the remote host window with the
 title [e-mail]

 Another way to logon is to use the Quicklist

        1. Open the Local Settings Notebook and click the 'Hosts' tab
        2. Follow the instructions in Add A Host Name To The Quicklist to get a
           name on the Quicklist
        3. Click 'Connect' on the Local Host window menu bar
        4. Click 'Quicklist' and then click the desired name.

 The remote host window will appear and the connect will proceed as described
 above.


ΓòÉΓòÉΓòÉ 4.5. Change The Remote Host Directory ΓòÉΓòÉΓòÉ

On the [e-mail] window

        -  Double-click an item in the directory listbox. os2 is a good choice
           because there are normally files in that one

 The display will be updated with the contents of the selected directory.

 Now, note the .. item in the directory listbox. Double-click that item now and
 the display will return to the parent directory. The .. pushbutton will do the
 same thing, and the / pushbutton will return you to the remote host directory
 that was current when you connected. Also note when navigating to a directory
 that you have seen before the display is updated much faster because the
 directory lists are cached. There are cache controls in the Settings Notebook.

 Another way to move back up in the current directory tree is by using the
 directory tree drop-down list

        1. Click the down arrow to the right of the directory name to see the
           list
        2. Click the branch of the tree that you want to return to

 If you like typing, press and hold CTRL and press c and you'll be prompted for
 the new directory name.

 Or, click the directory list with the RMB and you'll get a pop-up menu of
 directory actions.


ΓòÉΓòÉΓòÉ 4.6. Download Remote File ΓòÉΓòÉΓòÉ

On the [e-mail] window

        -  Double-click an item in the file listbox

 You will see the Send File To Local confirmation window which contains

        -  The fully-qualified name of the remote file to be downloaded
        -  The target directory on your workstation
        -  The file name to be stored in that directory
        -  The transfer type and Browse option

 You can change all of the above except the remote file name. Click 'Send' or
 press ENTER to start the file transfer.

 The file transfer progress window will become visible. When it goes away the
 file has been transferred to your workstation.

 To transfer more than one file

        -  Hold the LMB down and drag it over the file items you want to
           select, or press and hold CTRL and click each file item individually
        -  Click 'Send', or press ENTER, or double-click the file listbox

 You will see the Send File To Local window again. Each time you click 'Send'
 that file transfer will be scheduled and the next file will be presented for
 confirmation. If you decide to skip a file, click 'Next'. If you want to
 confirm all of the remaining files at once, click 'All'.

 When the first file transfer starts, the file transfer progress window will
 become visible. When it goes away, all of the files have been transferred to
 your workstation.


ΓòÉΓòÉΓòÉ 4.7. Download Remote File - Drag And Drop ΓòÉΓòÉΓòÉ

On the [e-mail] window

        1. Make sure the Ascii/Binary setting is correct
        2. Grab a file item with the RMB
        3. Drag it to the Local Host window
        4. Drop it on
             -  A directory list item to transfer to that directory
             -  A 'blank spot' in the directory list or the file list to
                transfer to the current directory

 Drag and drop transfers are NOT confirmed. When the file is dropped, file
 transfer starts and the progress window becomes visible. When it goes away the
 file has been transferred to your workstation.


ΓòÉΓòÉΓòÉ 4.8. Logoff And Disconnect From A Remote Host ΓòÉΓòÉΓòÉ

On the [e-mail] window

        -  Click 'Logoff', or
        -  Press and hold CTRL and press o, or
        -  Just press F3


ΓòÉΓòÉΓòÉ 5. Settings Notebooks ΓòÉΓòÉΓòÉ

There is a settings notebook for the local host and for each remote host that
has been successfully connected.

To open a settings notebook

        -  Click 'Options' and then click 'Settings', or
        -  Press and hold CTRL and press N


ΓòÉΓòÉΓòÉ 5.1. Local Host Notebook ΓòÉΓòÉΓòÉ

In the local host notebook you can customize

        -  Settings for the Local Host window
        -  Default settings for remote host windows
        -  Default Logon parameters and options
        -  FTP-It! options


ΓòÉΓòÉΓòÉ 5.1.1. Local Window Settings ΓòÉΓòÉΓòÉ

The Local Host window settings are found under the Local tab. In this section
you can

        -  Customize the file list by adding or removing file length and/or
           timestamp to the display
        -  Change the file list sort direction
        -  Enable or disable confirmation of certain events
        -  Specify an output directory for files transferred from a remote host
           to your workstation
        -  Control automatic refresh of the local host window


ΓòÉΓòÉΓòÉ 5.1.2. Default Remote Host Window Settings ΓòÉΓòÉΓòÉ

The default remote window settings are found under the Remote tab. The settings
in this section are used the first time you connect to a given remote host and
are similar to the Local Host Window Settings.

After the first connect to a given remote host, the window settings are
customized in the Remote Host notebook.


ΓòÉΓòÉΓòÉ 5.1.3. Default Logon Parameters ΓòÉΓòÉΓòÉ

Default logon parameters for remote hosts can be created and changed in the
Hosts section of the Local Settings Notebook. For each host you can specify

        -  Alias
        -  User id
        -  Password
        -  Account
        -  Initial directory to be displayed in the remote host window
        -  File name pattern, like *.zip, to restrict the file names displayed

 The logon parameters are automatically entered into the entryfields of the
 Logon window when you enter the host's name or alias. If no logon parameters
 have been defined for a host, the default parameters specified in the Logon
 section are used.

 If Use Email Address As Password is checked, the email address specified on
 the 'Options' page will be used when no password is specified. You can
 alternatively specify &email as the password and Ftp-It! will substitute the
 specified email address.

 Note that setting the default userid to anonymous and checking  'Use Email
 Address As Password' box is very handy and is recommended.


ΓòÉΓòÉΓòÉ 5.1.4. FTP-It! Options ΓòÉΓòÉΓòÉ

The Options section of the local host notebook is for general FTP-It! options.

          E-mail address, with a checkbox to use email address for a password
          when no password is given on the Logon window

          Include in Remote Title, which allows you to customize the title bar
          of the Remote Host windows

          Installation directory, to specify the location of the FTP-It! INI
          file


ΓòÉΓòÉΓòÉ 5.2. Remote Host Notebook ΓòÉΓòÉΓòÉ

The remote host notebook contains the same window controls as in the Local
section of the local host notebook.

There are additional controls, such as

        -  Enable or disable file list caching
        -  Establish a time limit for cached file lists
        -  Specify an output directory for files transferred from this host to
           your workstation. This directory overrides the default output
           directory setting in the local host notebook.

 Remote host settings are initially as specified in the Remote section of the
 local host notebook.

 There is a unique settings notebook for each remote host that has been
 connected. You must be connected to a host to open its settings notebook.


ΓòÉΓòÉΓòÉ 6. File Transfer ΓòÉΓòÉΓòÉ

With FTP-It!, you 'send' files between hosts. A file transfer is initiated on
the 'from', or source, host window

        -  A 'send' request on a remote host window is an FTP GET; files are
           transferred from remote to local
        -  A 'send' request on the local host window is an FTP PUT; files are
           transferred from local to remote


ΓòÉΓòÉΓòÉ 6.1. Default Output Directory ΓòÉΓòÉΓòÉ

Each host, local and remote, has a default output directory associated with it.
FTP-It! will send files to this directory unless you override it in the file
transfer confirmation dialog. The directory is specified in the host's settings
notebook and can be

        -  The directory currently displayed in the target host's window, or
        -  A specific directory on the target host system

 Each remote host can also have a target directory on your workstation for
 files that are downloaded from that host. This directory overrides the output
 directory setting on the local host.

 The default setting for output directories is to use the directory that is
 currently displayed in the target host's window.

 Note that you cannot change the output directory from the setting if

        -  File transfer confirmation is disabled, or
        -  Drag-and-drop file transfer is used


ΓòÉΓòÉΓòÉ 6.2. Confirmation ΓòÉΓòÉΓòÉ

By default, file transfer requests are confirmed. The confirmation dialog
allows you to change the output directory, output filename and transfer type
for each file being transferred.

In addition, file transfer confirmation on the local host allows you to select
the target remote host.

Because the local host can have more than one target the dialog operates a
little differently than on the remote host

     Local Host

        -  The 'Send' pushbutton schedules a file transfer with the selected
           remote host
        -  The same file can be sent to another remote host by selecting a
           different host from the list and clicking 'Send' again
        -  The 'Next' pushbutton must be clicked to present the next file to be
           transferred

     Remote Host

        -  The 'Send' pushbutton schedules a file transfer with the local host
           and presents the next file to be transferred

 If you change the output directory and/or the transfer type on the
 confirmation window, the changes apply to all requests not yet confirmed that
 have the same target host.

 File transfer confirmation can be disabled in the settings notebook for the
 host.

 File transfers that are initiated by drag-and-drop are NOT confirmed.


ΓòÉΓòÉΓòÉ 6.3. Default Host ΓòÉΓòÉΓòÉ

When connected to more than one remote host, you can designate one as the
default target for uploads by

        1. Clicking 'Connect' on the Local Host window
        2. Clicking 'Default Host'
        3. Clicking the desired remote host

 The default host is reset when

        -  You logoff of that host, or
        -  You reset the choice by pressing and holding CTRL and pressing z on
           the Local Host window

 When a remote host has been selected as the default, that host is pre-selected
 in the file transfer confirmation window. If confirmation is disabled, files
 are transferred to this host only.

 When connected to more than one remote host WITHOUT a designated default, file
 transfer confirmation cannot be disabled because it is in the confirmation
 dialog that you select the target host.


ΓòÉΓòÉΓòÉ 7. Hot Keys ΓòÉΓòÉΓòÉ

This section describes the keyboard shortcuts that are defined on the FTP-It!
windows.


ΓòÉΓòÉΓòÉ 7.1. Local and Remote Host ΓòÉΓòÉΓòÉ

File List Control. Changes to the file list made with these keys are not
recorded in the settings notebook.

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéKey         ΓöéFunction                                     ΓöéLocal ΓöéRemoteΓöé
Γöé            Γöé                                             ΓöéHost  ΓöéHost  Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+P      ΓöéFile list in FTP-IT! format                  Γöé      ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+S      ΓöéFile size in file list toggle                ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+T      ΓöéFile timestamp in file list toggle           ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+U      ΓöéFile list in remote host format              Γöé      ΓöéX     Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéALT+SHIFT+A ΓöéSort file list in ascending order            ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéALT+SHIFT+D ΓöéSort file list in descending order           ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéALT+SHIFT+E ΓöéSort file list by extension                  ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéALT+SHIFT+N ΓöéSort file list by name                       ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéALT+SHIFT+S ΓöéSort file list by size                       ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéALT+SHIFT+T ΓöéSort file list by timestamp                  ΓöéX     ΓöéX     Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ

Other Functions

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéKey         ΓöéFunction                                     ΓöéLocal ΓöéRemoteΓöé
Γöé            Γöé                                             ΓöéHost  ΓöéHost  Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+A      ΓöéAscii/Binary toggle                          ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+B      ΓöéBrowse file                                  ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+C      ΓöéChange directory                             ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+D      ΓöéDelete file                                  ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+H      ΓöéSwitch to Local Host window                  ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+I      ΓöéFTP-It! version information                  ΓöéX     Γöé      Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé            ΓöéRemote connection information                Γöé      ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+L      ΓöéLogon remote host                            ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+M      ΓöéMake directory                               ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+N      ΓöéOpen settings notebook                       ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+O      ΓöéClose Remote Host window                     Γöé      ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+P      ΓöéPrint file                                   ΓöéX     Γöé      Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+Q      ΓöéSend command to host (Quote)                 Γöé      ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+R      ΓöéRename file                                  ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+V      ΓöéRestore the file browser window              ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+X      ΓöéRestore the file transfer progress window    Γöé      ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+Z      ΓöéReset default remote host                    ΓöéX     Γöé      Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéENTER       ΓöéTransfer file                                ΓöéX     ΓöéX     Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéF1          ΓöéOpen FTP-It! User's Guide                    ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéF3          ΓöéClose host window                            ΓöéX     ΓöéX     Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéF5          ΓöéRefresh display                              ΓöéX     ΓöéX     Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ


ΓòÉΓòÉΓòÉ 7.2. File Browser ΓòÉΓòÉΓòÉ

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéCTRL+F      ΓöéFind string                                  Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+H      ΓöéSwitch to Local Host window                  Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+O      ΓöéBrowse file                                  Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+P      ΓöéPrint file                                   Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL++      ΓöéBrowse next file                             Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
ΓöéCTRL+-      ΓöéBrowse previous file                         Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéF3          ΓöéClose File Browser                           Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ


ΓòÉΓòÉΓòÉ 7.3. Sendfile ΓòÉΓòÉΓòÉ

ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
ΓöéCTRL+A      ΓöéAscii/Binary toggle                     Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ


ΓòÉΓòÉΓòÉ 8. Release Information ΓòÉΓòÉΓòÉ

     Version 2.3 - March, 1997

        -  Changes

             -- Added support for several uniquely-written AIX, UNIX and
                WINDOWS servers
             -- Shareware evaluation period changed to 28 days

        -  Fixes

             -- All files not being uploaded to directory specified in Sendfile
                window
             -- WARP Version 4 support

     Version 2.21 - March, 1996

        -  Changes

             -- Browse option added to Remote Host filelist menu
             -- Strip CTRL-Z option added to Local Host Settings for Ascii file
                transfers
             -- User-specifiable Remote drive list in Remote Settings. These
                drives will appear in the directory list. Drives are added to
                the list as you CD to them.

        -  Fixes

             -- Problem with loss of registration after OS/2 reinstall
             -- Not saving Local Host Sendfile window position/size
             -- Directory list not sorted with certain FTP servers
             -- Connect error message not cleared from Remote window after
                successful retry
             -- SYS3175 when Remote window closed during file transfer abort
             -- CD errors after unsuccessful CD to CDROM drive with no CD in it
             -- Time estimates occasionally missing from progress window
             -- False error messages using DELETE buttons on Browser window
             -- Better line speed calculation on Remote Info window
             -- Transfer speed missing from progress window with certain FTP
                servers
             -- Local window corrupted on vertical resize event
             -- Remote host PWD out of sync with display after a reconnect
             -- Unable to close Remote window after dialer disconnect.

     Version 2.2 - February, 1996

        -  Changes

             -- Two new pushbuttons on the Local and Remote Host windows for a
                fast directory change to the parent directory (..) or the
                initial directory (/)
             -- Progress window title changed to indicate the related remote
                window
             -- All Remote dialog titles can be customized in Local Settings
                notebook Options page to contain hostname,alias,userid or a
                combination of these
             -- SITE/QUOTE command window added
             -- Mouse-clicks supported on unparsed filelist view
             -- Added bytes/second display to Progress window
             -- ChDir menuitem added to popup menu on filelist box when
                unparsed view is selected
             -- Position and size of Sendfile, Command, Message, Progress and
                Logon windows saved
             -- Logon section of Local Settings Notebook defines default logon
                parameters only
             -- Hosts section of Local Settings Notebook allows definition of
                and changes to Logon parameters for hosts of the user's choice.
             -- Hostname aliases can be used. Logon parameters associated with
                the aliases are specified in the Hosts section of Local
                Settings Notebook. Hostname aliases will appear in all lists of
                host names
             -- Quick-connect list of user-selected names added to Connect
                menu. Names are added and removed from the list on the Hosts
                page of the Local Settings Notebook. Use popup menu or 'Change'
                pushbutton.
             -- Options page of Local Settings Notebook contains a 'use email
                address for default password' checkbox and radio buttons for
                changing the Remote dialog titles
             -- Separate file transfer confirmation settings for Ascii and
                Binary
             -- Pushbuttons added to the File Browser window for quick
                scrolling through the selected files, and for deleting files
                after viewing them
             -- Passwords stored in the INI file are now masked
             -- New option on Transfer page of Local Host Settings Notebook to
                preserve a remote file's date, and time when possible, on a
                download

        -  Fixes

             -- Progress window not destroyed after file transfer completion
             -- Time estimate improvements with erratic line response
             -- Some host messages not appearing in Messages window
             -- Handling PCFTP, NeoLogic and some other interesting FTP servers
             -- Lost remote host window following file transfer completion
             -- Loss of registration data across multiple systems and OS/2
                reinstalls. (Yes, you won't have to call BMT after
                re-installing OS/2 anymore)
             -- Unable to restore Messages window under certain conditions
             -- Remote window covers up Local window at startup
             -- Not always filling Logon window fields with saved options
             -- Not always filling Logon window fields with default options
                when a never-before used hostname is specified
             -- File transfer posted to wrong remote thread with many
                connections to the same host

     Version 2.11 - November, 1995

        -  Changes

             -- Remote Logon parameters saved by host and userid combination
             -- Remote Logon window host field is initialized with the last
                host used
             -- Local window will display the local host output directory if
                one is specified
             -- Added Local Host option to translate outbound file names to
                lower case
             -- Added Logon settings option to autologon a host or hosts
             -- Added Remote Logon option to connect to server using PASV;
                'Firewall-friendly connect' as documented in RFC 1579

        -  Fixes

             -- Set focus to Local Host window on startup
             -- Handle some non-compliant server responses
             -- SYS3175 in REXX.DLL processing INI file

     Version 2.10a - October, 1995

        -  Fix for 'Unable to Bind Data Socket' on Warp Connect over SLIP/PPP

             -- Circumvention for OS/2 APAR ic10390

     Version 2.10 - October, 1995

        -  First public/shareware release

     Version 2.0 - August, 1995

        -  BETA release

     Version 1.0

        -  Internal Release


ΓòÉΓòÉΓòÉ 9. Support ΓòÉΓòÉΓòÉ

For technical support, problem reporting or questions about FTP-It!, send
e-mail to [e-mail]

Please include the versions of FTP-It! and VROBJ.DLL. To get this information,

        1. Start FTP-It! and wait for the Local Host window
        2. Press and hold CTRL and press i
        3. Record the version numbers for
             -  FTP-It!
             -  FTPIT.DLL
             -  VROBJ.DLL

 Registered users are guaranteed a response to all communications. It is our
 policy to respond quickly to all problem reports and suggestions from any
 FTP-It! customer.

 Again, thank you for trying FTP-It!


ΓòÉΓòÉΓòÉ 10. Disclaimer ΓòÉΓòÉΓòÉ

  No warranty of any kind can be given for damage caused through
  FTP-It! directly or indirectly or any other way.


ΓòÉΓòÉΓòÉ 11. Trademarks And Copyrights ΓòÉΓòÉΓòÉ

OS/2    trademark of International Business Machines Corporation

WARP   trademark of International Business Machines Corporation

VX-REXX  trademark of Watcom International Corporation




Info-ZIP (C) Copyright 1989 Samuel H. Smith;  All rights reserved
     (C) Copyright 1992 Igor Mandrichenko
     (C) Copyright 1994 Greg Roelofs

     NOTE:  FTP-It! is packaged using Info-ZIP's compression
     utility.  UnZip is used to read compressed installation
     zip files.  Info-ZIP's software (Zip, UnZip and related
     utilities) is free and can be obtained as source code
     or executables from various bulletin board services and
     anonymous-ftp sites, including CompuServe's IBMPRO forum
     and ftp.uu.net:/pub/archiving/zip/*.



FTP-It!  (c) copyright 1995,1997 Douglas B. Brown, Jr.