home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 33 VDrivers
/
33-VDrivers.zip
/
winn1000.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1997-10-23
|
14KB
|
423 lines
#
| README file for
|
| ELSA WINNER OS/2 DISK VERSION 03.18.14
|
| WINNER 1000
|
| Copyright (c) 1994-97 ELSA AG, Aachen (Germany)
|
| ELSA AG Internet : http://www.elsa.de
| Sonnenweg 11 LocalWeb : +49-(0)241-938800
| D-52070 Aachen CompuServe : GO ELSA
|
| ELSA Inc. Internet : http://www.elsa.com
| 2231 Calle De Luna CompuServe : GO ELSA
| Santa Clara, CA 95054
| USA
|
| ELSA Asia Inc. Internet : http://www.elsa.com
| 7F-11, No. 188, Sec. 5 CompuServe : GO ELSA
| Nanking East Road
| Taipeo 105
| Taiwan, R. O. C.
|
| 10/23/97, GBorgs
Table of Contents
1. Overview
2. Disk Contents
3. Installation
4. Notes
5. Release Notes
6. Caveats / Known Problems
------------------------------------------------------------------------
1. Overview
!!! ATTENTION !!!
This disk contains the WINNER system software only for
OS/2 2.1 and greater.
See section 2 for a list of files and their purpose. Information
in this file may not appear in the manuals. Please read this
file carefully to be aware of any changes to the documentation.
Information in files on this disk supersedes the printed
documentation.
------------------------------------------------------------------------
2. Disk Contents
The disk's ROOT directory contains the following files:
DATE.DOC file identifying the disk, production date, etc.
README.TXT this file
LIESMICH.TXT German version of this README file
DSPINSTL.EXE the setup and installation program
ELSAINST.DLL Dynamic Link Library for DSPINSTL
ELSA.DSC installation data file, used by DSPINSTL
ELSA8.DSP --------- " --------
ELSA8_H.DSP --------- " --------
VSVGA.SYS MDOS device driver for the WINNER board
WINDOWS WINOS2 device driver for the WINNER board
VIDEO OS/2 device driver for the WINNER board
INSTALL.CMD REXX Installation Program
INSTD.CMD REXX Installation Program
INSTE.CMD REXX Installation Program
INSTALL2.CMD OS/2-Batch Installation Program
WININST.EXE WINNER configuration utility
WININST.ICO WINNER.EXE Icon
SVGADATA.PMI WINNER configuration file
TRIO1MB.INI Configurationfile for WINNER TRIO 1MB
TRIO2MB.INI Configurationfile for WINNER TRIO 2MB
TESTSCR.EXE file which shows the testscreen
WINNER WINNER configuration file
WINMAN.MON WINman monitor file
WMANCOPY.BAT WINman Installation Batch-File
WCDCOPY.BAT WINman Installation from CD Batch-File
------------------------------------------------------------------------
3. Installation
If the ELSA OS/2 driver version 2.01 installed, begin with 1)
and ignore the following statements.
To guarantee a successfully installation, be sure to have the
VGA driver installed. If it isn't so, it can be easy done by
the setvga command.
a) OS/2 2.1x
Open a OS/2 window and type in the directory c:\os2:
setvga bootdrive:
and follow the instruction.
b) OS/2 Warp
use the restore option at system boot time (Alt+F1) and
reset the primary display to VGA (Key V)
After that reboot the system and continue with 1)
1) Go to OS/2 window screen.
2) Type the following line:
a) OS/2 System with REXX support
a:install
b) OS/2 System without REXX support
a:install2 [installdrive:] [bootdrive:]
(the 'ELSA Video Configuration' program will not be
installed)
The installation program creates a directory (Default :
bootdrive:\WINOS232) and copies all necessary files into this
directory. Then it starts DSPINSTL.EXE.
You have to start with the installation from the diskette,
like it is described above.
3) The "Display Driver Install" dialog box will be displayed.
Choose the "Primary Display" option.
4) Under the next menu select:
"ELSA WINNER 1000/2000 V 3.17"
5) Under the next menu select:
" 640x480x256#60Hz" or
"1024x768x256#75Hz"
The selected resolution will be installed.
6) The Source Directory menu will be displayed. Set the
source directory to the appropriate drive and proceed
with the Install option. (Select "Change", replace "a:"
with "." (point) for the current directory, select
"Set" and then "Install".)
7) The installation may pause and display prompts to
overwrite certain files. Please answer "yes" for each file.
Under certain circumstances you will get a message that the
video adapter isn't supported. Confirm this and continue with
the installation.
8) Select "OK" in the next displayed menu.
9) You will be ask to install the 'ELSA Video Configuration
Editor', answer with 'Y'es.
10) You will be ask to insert the 'WINGUI Disk' (ELSA Windows
Driver Disk), answer with 'Y'es.
The WINOS2 WINman will be installed.
11) Shutdown the system and restart OS/2
12) With the Utility 'ELSA Video Configuration' you can select the
desired video mode.
After the next boot, this mode is active.
Before you can use the new testscreen button in the 'Resolution'
dialog, you have to select a monitor in the monitor dialog.
------------------------------------------------------------------------
4. Notes
4.1 WIN-OS/2 Configuration :
To change the standard configuration, use the Windows program
WINman. The WINNERxx.Drv (in WINDOWS.DR@) are copied to the
WINOS/2 directory during the installation. You don't have to
copy and expand this driver from the GUI-disk.
4.2 OS/2 Warp Version 3
The Installation is enhanced to run under this OS2 Version.
4.3 De-Installation:
1. Reset to VGA
a) OS/2 2.1x
- change into the OS2-directory
example: C:\OS2
- setvga bootdrive:
example: SETVGA C:
b) OS/2 Warp
see under 3. b)
2. delete the files
- WINOS232.DLL (bootdrive:\os2\dll)
- BVHSVGA.DLL (bootdrive:\os2\dll)
example: DEL C:\OS2\DLL\WINOS232.DLL
DEL C:\OS2\DLL\BVHSVGA.DLL
This steps are necessary, because the DSPINSTL.EXE (before WARP II)
doesn't work correct.
4.4 supported boards
32Bpp mode :
-all WINNER Boards
except the WINNER 1000ISA/EISA and the WINNER 100VL
8/16Bpp mode :
-all WINNER Boards
4.5 This Version is a 8/16 and 32bpp color Driver
and all possible Screen Resolutions.
The video refresh rates can be modified with the DOS WINSETUP
under DOS or in a DOS-Fullscreen session.
(Not for WINNER 100VL and WINNER 1000TRIO !)
The driver will use the new mode after booting. The "ELSA Video
Configuration Editor" show all of the programmed (WINSETUP)
modes for selection.
4.6 TIP for reseting a incorrect video mode :
To overwrite the selected video mode, insert the following line
into the CONFIG.SYS :
SET ELSA_RESET=H system boots with 1024x768x256 75Hz
SET ELSA_RESET=L system boots with 640x480x256 60Hz
------------------------------------------------------------------------
5. Release Notes
This section describes the history of the releases.
VERSION 3.11 :
- stretching of monochrome bitmap fixed.
- startup logo fixed (WINNER 1000ISA/EISA).
- hardware cursor corrected (WINNER 1000ISA/EISA).
- DOS Fullscreen-Switching corrected (WINNER 1000PRO/PCI).
VERSION 3.12:
- corrupted Windows-Systemcolors fixed.
- PCI Mainboard-BIOS conflicts fixed with a work around.
- WinMan installation enhanced.
- defected seamless repaint after a fullscreen switch
corrected.
- PS Viewer fixed.
VERSION 3.14:
- Performance improvement.
(only for WINNER 1000/2000PRO and WINNER 1000TRIO)
- Software Motion Video support for 32 BPP Mode.
- WinMan (V.2.09) will not run in seamless and will bring
a message.
- Pixel bugs on the WPS fixed.
VERSION 3.15:
- add support for WINNER 1000AVI and WINNER 2000PRO/X.
- defect cursor in 16 BPP mode (WINNER 1000PRO) fixed.
- pixelerror in line functions fixed.
- optimizing for GpiPolyLine with line type SOLID.
VERSION 3.16:
- add support for WINNER 2000PRO/X 8 MB.
- add support for all 8/16/32 BPP resolutions.
- wrong grey pattern at 32 BPP fixed.
- invalid character index detection fixed.
- add monitor selection and testscreen.
- 8 bit per gun, if it is supported by the palette.
VERSION 3.17:
- ZOC : font error corrected.
- MMPM : switching to a fullscreen-session,
while playing a AVI-File.
VERSION 3.17.06:
- Implemantation of SET VIDEO_APERTURE.
- MODE MONO in a fullscreen session caused a black screen
after a switch back to the Desktop. Fixed.
- LOTUS : lines to long fixed.
- 868 Chip Bugs fixed.
- WINNER 1000ISA fullscreen problems fixed.
- Performance improvement for AVIO Fonts in OS/2 and DOS-Windows.
- Starting WINOS2 w/o VIDEO_8514A_XGA_IOTRAP caused a TRAP, fixed.
- incorrect refreshrates in testscreen with a WINNER 2000PRO/X.
VERSION 3.18:
- RELEASE
VERSION 3.18.04:
- PMView : GpiDrawBits bug fixed.
- WINNER 1000PCI : dark screen in a fullscreen session fixed.
VERSION 3.18.05:
- additional Resolutions for WINNER TRIO
VERSION 3.18.06:
- WINNER 2000AVI
VERSION 3.18.10
- WINNER 1000PRO/X, WINNER 1000ISA with new palette chip
- Bug for blits of tiny rectangles in 8bpp and 16bpp
modes fixed.
- Transparent background modes implemented correctly.
VERSION 3.18.11
- 868/968 chip problem circumvented (caused "ghost letters"
in Font palette, for example).
VERSION 3.18.12
- WINNER 1000TRIO with new graphics chip release
- Fixed scroll and zoom problems in connection with
StarImage.
VERSION 3.18.13
- Fixed fill problems (window shadows for NPSWPS).
- Fixed dither problem (caused stripes in OS/2 chess for
8bpp modes).
VERSION 3.18.14
- Fixed WPS hangup problem with IMP OS/2 and others.
------------------------------------------------------------------------
6. Caveats / Known Problems
6.1 WINOS2
With some monitors, you can't use a refresh rate different
from that of the WPS. In this case you will see a black screen
(or something else) in the WINOS/2 Session.
WINNER 2000 ISA/EISA D-Release:
Sometimes, it is possible that the screen is black after
starting the WINOS2-Fullscreen-Session. If that happens, close
the session with Alt+F4 and press enter.
WINNER WINOS2 and Seamless Driver:
Use only the WINNERxx.DRV OS/2-Driver Disk. These files are
copied by the installation utility.
6.2 Lotus 1-2-3 f. OS/2 Vers. 2.0
Lotus 1-2-3 runs only in 8BPP modes.
6.3 Software and Color Cursor
For the following configuration no software cursor is available:
2 MB Video RAM:
1600 x 1280 x 8 BPP
Work around:
Use the resolution 1600 x 1200 x 8 BPP
4 MB Video RAM:
1600 x 1280 x 16 BPP
Work around:
Use the resolution 1600 x 1200 x 16 BPP
8 MB Video RAM:
1600 x 1280 x 32 BPP
Work around:
Use the resolution 1600 x 1200 x 32 BPP
6.5 DIVE or MMPM2 with WINNER 1000/2000 ISA/EISA/VL/PCI (S3 928 Chip)
The system may hang.
Work around : Add to the config.sys the line
SET VIDEO_APERTURE=Video Base Adr. (MB)
Video Base Adr. (in MB and as a hex value)
has to be an unused physical address in the system
and has to be above the system memory.
Recommendation :
- PCI-Bus System
SET VIDEO_APERTURE=A00 => 2560 MB
- VL-Bus System
SET VIDEO_APERTURE=78 => 120 MB
- EISA-Bus System
SET VIDEO_APERTURE=3C => 60 MB
- ISA-Bus System
SET VIDEO_APERTURE=E => 14 MB