home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 33 VDrivers
/
33-VDrivers.zip
/
64os2222.zip
/
README.ATI
< prev
Wrap
Text File
|
1996-06-05
|
5KB
|
113 lines
64OS2222.ZIP - ATI Technologies Inc.
█████████████████████████████████████████████ ATI Technologies Inc.
████████(R)███▀ ▄▄▄ ▀██ 33 Commerce Valley Drive East
████████████▀ ▀▀▀ ▄██ Thornhill, ON L3T 7N6
██████████▀ ▄█████ █████████████████ CANADA
████████▀ ▄██▀▀███ ████████▀ ▀████
██████▀ ▄███ ██ ████████ ████ Support: (905) 882-2626
████▀ ▄██████▄▄███ ████████ ████ Support FAX: (905) 882-0546
██▀ ▄█████████████ ████████ ████ Compuserve: GO ATITECH
██▄ ▄███████████████▄ ▄████████▄ ▄████ ┌─────────────────────────────┐
████▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀▀█████ │ ATI mach64 v2.22 │
███▌ T E C H N O L O G I E S I N C . ▐████ │ OS/2 2.11 and 3.0 Warp │
████▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄█████ │ Display Drivers │
█████████████████████████████████████████████ └─────────────────────────────┘
Length Method Size Ratio Date Time CRC-32 Attr Name
------ ------ ----- ----- ---- ---- -------- ---- ----
877 DeflatN 346 61% 05-24-96 14:08 d3fd5147 --w- LOAD64.VSF
1821 Stored 1821 0% 05-24-96 14:03 c35cec8f --w- DRVRNOTE.LZH
622766 DeflatN 616280 2% 05-15-96 15:58 f94b5716 --w- OS2DRV.LZH
169829 DeflatN 167870 2% 05-15-96 10:59 42d085d2 --w- MACXS.LZH
195186 DeflatN 192764 2% 04-30-96 10:11 da2f381e --w- MACXE.LZH
27477 DeflatN 14308 48% 01-03-96 14:12 345c93d7 --w- PMINST.EXE
2585 DeflatN 1226 53% 06-05-96 17:03 2eae2238 --w- 64OS2222.TXT
1769 DeflatN 708 60% 10-11-95 13:28 6bf42416 --w- PMINST.HLP
2628 DeflatN 1227 54% 06-05-96 17:03 3b50973b --w- README.ATI
------ ------ --- -------
1024938 996550 3% 9
mach64, 64OS2222.ZIP
*****************************
1.0 Introduction
2.0 Installation Notes
*****************************
1.0 Introduction
The mach64 device drivers supplied here are for OS/2 2.1X and OS/2
WARP.
*****************************
2.0 Installation Notes
DO NOT TASK SWITCH WHILE RUNNING THE INSTALL PROGRAM.
1. Ensure that you have a copy LOAD64.ZIP. It is available on the ATI
BBS, ftp site (ftp.atitech.ca), and on our CompuServe forum (GO
ATITECH).
2. Ensure that you have a copy of PKUNZIP.EXE 2.04G. PKUNZIP is
available on most BBS and information services, including the ATI BBS
and CompuServe.
3. Open a full screen DOS session.
4. Unzip LOAD64.ZIP and 64OS2222.ZIP into the same temporary directory
on your hard disk, then run the LOAD64 utility. For example:
MD \ATITEMP
PKUNZIP LOAD64.ZIP \ATITEMP
PKUNZIP 64OS2222.ZIP \ATITEMP
CD \ATITEMP
LOAD64
5. Follow the screen prompts for installing the OS/2 driver.
6. Once the driver has been installed, you can delete the contents of
the temporary directory (DEL \ATITEMP\*.*) and delete the directory
itself (RD \ATITEMP).
7. We recommend that you keep a copy of the ZIP files (64OS2222.ZIP
and LOAD64.ZIP), in case you need to install the driver again.
8. Run DSPINSTL from within an OS/2 window.
9. When the Display Driver Install panel appears, select Primary
Display and click OK to bring up a list of choices. You should see an
option for ATI mach64.
10. Select 'ATI mach64 (Enhanced 2.22)' from the list and click OK. If
a error message pops-up, which says "The installed adapter does not
support the selected display driver. Do you wish to continue?" ignore
it and click OK.
11. When the source directory panel appears, select 'Change' and
enter:
C:\MACH_OS2 (if you don't use c: as you boot drive replace it with the
appropriate drive letter) Click 'Set' and then 'Install'. After the
files are copied, exit the OS/2 window or full screen session. Shut
down and restart your system.
12. The PM driver will first come up in 640x480, 256 colors mode. Use
the following steps to change the screen resolutions or number of
colors:
a) Open 'OS/2 System' icon.
b) Open 'System Setup' icon.
c) Open 'System' icon.
b) Select the 'Screen' tab.
e) Select the desired resolution and number of colors from the
list.
f) Double click on the system menu icon or select close from the
system menu to close the window.
g) Shut down and restart your system.
*****************************