home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 29 Fixes_o
/
29-Fixes_o.zip
/
usin43.rme
< prev
next >
Wrap
Text File
|
1995-06-15
|
6KB
|
168 lines
Install fixes for CAE/2 v1.2 (US) and SDK/2 v1.2 (US)
=====================================================
This README file contains information for the following products:
- DB2 Client Application Enabler/2 (CAE/2) v1.2
- DB2 Software Developer's Kit/2 (SDK/2) v1.2
It details all install fixes made to the product since CAE/2 v1.2.0
(GOLD, syslevel WR07000) or SDK/2 v1.2.0 (GOLD, syslevel WR07000).
This includes all install fixes for the Service Pak WR07043 (CAE/2)
and WR07048 (SDK/2).
Pre-Requisites
--------------
The fix can be applied to GOLD versions (Syslevel WR07000) of:
CAE/2 v1.2 (Client Application Enabler /2)
and SDK/2 v1.2 (Software Development Kit /2)
Applying the Fixes
------------------
USINCL.ZIP contains the following .ZIP files:
USINCAE2.ZIP ..... fixes for CAE/2 v1.2
USINSDK2.ZIP ..... fixes for SDK/2 v1.2
For CAE/2 users:
Copy USINCAE2.ZIP to a temporary directory on your hard drive.
Insert Disk 1 of the CAE/2 v1.2 product into drive A:. Use the
command 'pkunzip -o usincae2.zip a:' to overwrite the files
on your installation diskette.
NOTE: If a 'Disk Full' error occurs when performing the pkunzip
(due to 0 bytes free on disk 1), then move the file PKZIP.EXE off the
first disk and save it on disk 3, or another drive on your system.
If you have previously installed CAE/2 v1.2 on your system use
the following command to apply the fix.
pkunzip -o usincae2.zip x:\os2\install
( where x: is the system boot drive )
For SDK/2 users:
Copy USINSDK2.ZIP to a temporary directory on your hard drive.
Insert Disk 1 of the SDK/2 v1.2 product into drive A:. Use the
command 'pkunzip -o usinsdk2.zip a:' to overwrite the files
on your installation diskette.
NOTE: If a 'Disk Full' error occurs when performing the pkunzip
(due to 0 bytes free on disk 1), then move the file PKZIP.EXE off the
first disk and save it on disk 3, or another drive on your system.
If you have previously installed SDK/2 v1.2 on your system use
the following command to apply the fix.
pkunzip -o usinsdk2.zip x:\os2\install
( where x: is the system boot drive )
Description of Fixes
--------------------
APAR JR08226 : Installation on WARP fails
This fix solves a problem for installing CAE/2 v1.2 and SDK/2 v1.2
on OS/2 WARP (v3.0). The CAE/2 & SDK/2 version 1.2.0 could only be
installed on OS/2 2.0 or 2.1. This fix enables the installation of
CAE/2 & SDK/2 v1.2 on an OS/2 release later than 2.0 (including WARP).
APAR JR08352 : No FFST folders after installation
Previously, the FFST folder may be removed during installation
if CM/2 1.11 was already installed on the system. This problem
has been fixed.
Trailing blanks in response file cause error
Leading or trailing blanks for the keyword DBWorkStationName in the
CID response file caused validation error during installation.
This problem has been fixed.
Install fails when IBMLVL.INI file has a non-existant IBM_DB/PATH
DB2/2 installation failed with the following errors if the IBMLVL.INI
file had IBM_DB/PATH pointing to disk drive that did not exist:
DBI0021E Invalid path or file name
DBI0019E Unexpected Presentation Manager error
This could occur after the following chain of events:
- DB2/2 was installed (on drive x: for instance)
- DB2/2 was then manually moved to another drive
(i.e. without performing a re-install)
- The old install drive (x:) was removed so it
was no longer recognizable to OS/2
- An install or re-install of DB2/2 was initiated
A fix has been implemented for this problem.
Installing over a previous install
Previously, installing CAE/2 or SDK/2 over top of DB2/2, CAE/2,
or DB2/2 DCF (on a different drive) the warning DBI0108W "An
earlier version of database manager was found on another drive
Do you want it to be removed? Yes/No/Cancel" was displayed.
Even if 'No' was selected, the product was removed.
This fix corrects the problem by allowing you to backup the product
before installing CAE/2 or SDK/2 and ALWAYS deleting a previous
product during the actual CAE/2 or SDK/2 installation (no warning
message is displayed).
CID install fails, yet install returns good CID return code
Previously, if errors were encountered during a CID install
the install program indicated a successful installtion instead
of returning a install failed error code. This problem
has been fixed to display an install failed message if errors
are encountered during a CID installation.
Some CID config keywords allow illegal values
Previously, the installation would fail due to CID configuration
keywords allowing illegal values. The keywords DCFMaxCommoHeapSize
and DCFMaxRDSHeapSize have been adjusted.
Install fails on Warp with PCMCIA cards
Previously, when installing CAE/2 on a machine with a PCMCIA slot,
scrolling through all available drives for install will yield a
"Drive not Ready" error for the drive letter representing the PCMCIA
drive. This problem has been fixed by only displaying drives that
are writeable. Drives that are unformated, read-only or removable
that are not ready are removed from the list displayed.
Migrate database or node directories
Previously, when installing CAE/2 v1.2 or SDK/2 v1.2 over top
of DB2/2 v1.2 or DB2/2 DCF v1.2, the migration of the database and node
directories failed. The database and node directory formats
are different for CAE/2 and SDK/2 from DB2/2 and DCF. This fix
corrects the problem.
***********************************************************************
** **
** (c) COPYRIGHT INTERNATIONAL BUSINESS MACHINES CORPORATION 1995. **
** ALL RIGHTS RESERVED. **
** **
***********************************************************************