home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 28 Fixes4x
/
28-Fixes4x.zip
/
wrp34ins.txt
< prev
next >
Wrap
Text File
|
1997-07-20
|
6KB
|
153 lines
06/19/97 Product Installation Collection 01
TERMS AND CONDITIONS
--------------------
Important - please read the following terms and conditions.
Downloading the Service Fixes included in this collection indicates your
acceptance of the following terms and conditions:
1. You must be, and agree that you are, a current licensee of OS/2
Warp 3/4.
2. You may make copies of the OS/2 Service Fixes equal to the number
of licensed copies of OS/2 Warp 3/4.
3. You may only use the OS/2 Warp 3/4 Service Fixes included with
this collection for maintenance purposes.
4. All other terms and conditions of your OS/2 Warp 3/4 license
agreements apply to the Service Fixes; however, this does not
extend any warranty and/or services, including but not limited to
the "Initial Installation" period, outlined in such agreements.
Note: OS/2 Warp 3/4 means OS/2 Warp 3 or OS/2 Warp 4.
Collection of fixes for resolving Installation problems
-------------------------------------------------------
This zip file is a collection of fixes for problems that occur during install.
The intent of this collection is to allow system administrators to manually
update portions of their CID install trees with corrected install modules.
Download to a separate (empty) directory and expand using PKUNZIP or UNZIP.
Use the -d flag to expand the directory structure stored in the zipfile.
Fixes are organized by release. V3 contains fixes for Warp 3.0 based products.
V4 contains fixes for Warp 4.0. Within the respective version directory, the
fixes are named with the APAR that identified the problem.
Within each APAR directory, a readme identifies the procedure to be used to
apply that fix.
The HINTS directory
-------------------
The HINTS directory contains additional documentation to help you resolve
installation problems. The files are:
CDROM_IN.LST - Workarounds and tips for getting Warp 4 installed on your
system. Printable at 60 lines/page.
CDROM_IN.HTM - WWW Browser version of the above.
CID_INFO.LST - Instructions for CID migration to Warp 4.
Printable at 60 lines/page.
CID_INFO.HTM - WWW Browser version of the above.
To look at the WWW Browser version of these files, start (*) Web Explorer or
(**) Netscape Navigator for OS/2 then use the File -> Open dialog to point to
the .HTM file you want to review.
APAR listing for V3
-------------------
None
APAR listing for V4
-------------------
JR09318
CONFIG.SYS ERROR WHEN INSTALLING OS/2 WARP V4 OVER OS/2 WARP V4
Installing Warp 4 over Warp 4 the file MMOS2\VCSHDD.SYS is being deleted
and when you boot the system after installation finished, the following error
message is being displayed:
SYS1718: The system cannot find the file c:\mmos2\vcshdd.sys specified in the
Device statement on line xx of config.sys
JR09456
INSTALL.EXE DOES NOT SAVE OPENDOC OR VOICETYPE COMP. CHECK MARKS
If you select OpenDoc or VoiceType then select Win-OS/2 support, select the
More button then click on Automatic Configuration and Advanced Configuration
back and forth a couple of times, the check marks for OpenDoc and Voicetype
are removed.
JR09491
MERLIN WINOS/2 GDI.EXE PROBLEM WITH THINKPAD USES WDC24 CHIP SET
IBM ThinkPads using the WDC24 chip set, when installing Warp 4, and set
resolution to 800x600x256 then reboot and try to load WinOS/2, Customers see
that GDI.EXE could not be loaded.
JR09507
BAD MSG IN WINOS2 NETWARE INSTALL. MISSING IPX.OBJ IN V4 CD.
When a user installs Netware support under WINOS2 in Warp 4.0, an incomplete
dialog box appears titled "WIN-OS/2 Setup" that prompts the customer to
"Please insert the ." instead of "Please insert the Disk # xx". The
installation program at this point is attempting to install the file IPX.OBJ.
JR09509
WIN/OS2 DLL FILES NETAPI.DLL AND PMSPL.DLL ARE MISSING
Enter WINOS2 setup to setup the 'Network Awareness' for a session fails.
Customer gives the path as X:OS2IMAGE\DISK_W2 and is then asked for DISK_W5.
The next message is to insert disk "." (a period: no name, nothing else).
There is a screen in back that indicates it is looking for NETAPI.DLL and
PMSPL.DLL.le
JR09627
HANG DURING MIGRATION WITH EASY INSTALL WITH CODEPAGE CHANGE.
When migrating from Warp V3 to Warp V4, if the codepage of Warp
V4 is different from that of Warp V3 and the user selects Easy Install,
the system hangs in Phase II. This is especailly noticeable if Ultimail Lite
is installed on the partition.
JR09882
MISSING FILE(S) DURING THE CID INSTALL CAUSE SOME CM2 OR PCCOM
ICONS FROM ITS FOLDER TO DISAPPEAR AFTER REBOOT.
The file LFAPI.DLL is missing in CID environment because SYSMGT component is
not installed (CLIFI.EXE). This causes icons of OS2PEER not to be built if
OS2PEER is installed after COM/2 or PCOM/2.
JR10245
WARP V4 FAILS TO INSTALL A HP DESKJET 500C PRINT DRIVER FOR
WINOS2
With WARP 4 you cannot install a HP ***DeskJet 500C print driver for WINOS2.
The \OS2\MDOS\WINOS2\SYSTEM\CONTROL.INF file has an incorrect entry of
disk Z: for the print driver. A search of Print Driver diskettes fails to
find the driver.
Fix is to obtain the driver directly from HP.
Trademarks:
* Web Explorer is a trademark of IBM Corporation
** Netscape Navigator is a trademark of Netscape Communications Corporation
*** DeskJet is a trademark of Hewlett Packard Corporation